![]() |
Re: "Chalky White" 71 stepper
Quote:
|
Re: "Chalky White" 71 stepper
I like your concept on the truck and your approach so far. Tuning in for the the rest of the story. I know which character on the show you speak of, just have not watched it in the last year or so...no more HBO at the house..
|
Re: "Chalky White" 71 stepper
Quote:
|
Re: "Chalky White" 71 stepper
I'm tuning in too!!! Great work so far....! Nice to follow a fellow stepper!
|
Re: "Chalky White" 71 stepper
Quote:
|
Re: "Chalky White" 71 stepper
Thought I'd share a picture of my boy waxing on the rear fender as well as him sitting in it with me for the first time (seat's been out as we worked on fuel system). Spindles should be here today and just heard from Tommy at TNT Motorsports saying my wheels would be here soon.
http://i1300.photobucket.com/albums/...psrrxegbkc.jpg http://i1300.photobucket.com/albums/...ps7fn2o346.jpg |
Re: "Chalky White" 71 stepper
great looking start, looking forward to the progress
|
Re: "Chalky White" 71 stepper
Nice truck, that is the way to do it start them young. He will have good memories of that forever. I know mine do.
|
Re: "Chalky White" 71 stepper
Truck is cleanin' up real nice...gonna be sweet with a new set of wheels!
|
Re: "Chalky White" 71 stepper
Robbie ,you know there is something missing from your pics ,your better half in front of the truck with you and the little man.
|
Re: "Chalky White" 71 stepper
Quote:
Quote:
|
Re: "Chalky White" 71 stepper
Quote:
Quote:
|
Re: "Chalky White" 71 stepper
Belltech 3" drop spindles arrived tonight - albeit in one beat up box with both parts of the spindles exposed. Must've made rough trek from PA in the weather.
Terrible pics but I know you all like them so here we go. http://i1300.photobucket.com/albums/...psvwzvof98.jpg Unwrapped them to check them out but didn't get pic. Here they are wrapped. http://i1300.photobucket.com/albums/...psd4vkl4no.jpg |
Re: "Chalky White" 71 stepper
Now if it will just warm up so you can start playing with those new parts . I went to the bodyshop yesterday to visit mine.
|
Re: "Chalky White" 71 stepper
Quote:
How's it coming along? Get any new pics? |
Re: "Chalky White" 71 stepper
Robbie ,I didnt get any pics ,didnt plan on going .They got the dynamat type stuff(peel/nseal from Lowes) laid in the floor and got the heavy plastic floor mat installed,got the tilt column finished up and are trying to figure out the wiring for the tach dash as we speak. Its beginning to look like a truck again .The windshield should also be in now ,had to get a new one as the old one cracked when he tried to install it .And they said that thick heavy plastic flooring was a pain to get right but it looked great.
|
Re: "Chalky White" 71 stepper
Quote:
|
Re: "Chalky White" 71 stepper
Alright, so I took a chance yesterday and did something I wouldn't normally do: I bought something other than a flowmaster for exhaust. Since it's a 6 cylinder and I need to focus my funds on other portions of the truck for now (and the only reason I'm looking into exhaust right now is the current system is absolutely trashed!), I listened to the advice of other trusted forum members - especially chuckmc8 - and bought an IMCO muffler on clearance from Summit. For $30 shipped to my door, I thought what could I lose!
Anyway, I bought it yesterday at 1 pm and it was at my door this afternoon (granted I only live 1 hour away but I figured it would take longer to process). Seems to be a quality product even though it's MIC, I think it'll work fine. Just plan to run a single 2.25" pipe from manifold and turn down behind rear tire - just barely visible. Hope it sounds good and doesn't sound raspy. Want as much chambered rumble sound as possible without a ton of inner cab sound. http://i1300.photobucket.com/albums/...ps4b50e0e3.jpg http://i1300.photobucket.com/albums/...psec273c41.jpg |
Re: "Chalky White" 71 stepper
You sure cant beat that price and it looks good.
|
Re: "Chalky White" 71 stepper
Quote:
|
Re: "Chalky White" 71 stepper
Chalky finally made his maiden voyage....straight to my new buddy Ben's shop, Davis Performance. It was a fun 3 mile drive with no kick down cable connected (uphill was fun!). Amazingly he rode really smooth!
When I went to swap out the radiator the tranny cooling lines were stripped so Ben is going to swap them out, put in radiator, make kick down bracket, and finish the tune-up, set the timing, etc. Then it's on to purchasing the front end rebuild kit, and lowering springs and shocks to go with the spindles and blocks I have. Should have 3 of my wheels here this week and will focus on getting the other wheel and tires soon. Got the seat belts in and headlight bezels on today as well as cleaned out the bed of the truck. Here's a pic of him at the shop. http://i1300.photobucket.com/albums/...ps1d09fcd1.jpg |
Re: "Chalky White" 71 stepper
Looking good ,you can get trans lines from Right Stuff Detailing very fast ,I just ordered mine wednesday and they were here Friday .They were about $45 ,took mine along with the crate motor and a trailer load of other parts to the bodyshop today .
|
Re: "Chalky White" 71 stepper
Ole chalky is looking good. Nice score on the muffler too.
|
Re: "Chalky White" 71 stepper
You'll be tearing up the streets in no time. Have to come out to Caffeine and Octane when it warms up a bit.
|
Re: "Chalky White" 71 stepper
Quote:
Quote:
Quote:
|
All times are GMT -4. The time now is 02:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com