Originally Posted by Grumpy old man (Post 8015083)

You may as well drop a honda 4 cyl in too while your at it , and some back up cameras ,a bunch of led's and maybe drop it on bags mounted to a rusty frame and take it to the ground and hey why not hack out the dash and install a chinese stereo and amps with some boom speakers ? so you can't hear that fart can exhaust ? and hey some cheap aftermarket race seats would fit right in ? :lol:

I'll never understand the instant gratification generation ...:lol::chevy:

Originally Posted by crakarjax (Post 8018311)

Found it, ex 72310-SVA-A01 - $50 each

Originally Posted by '70_402 (Post 8016462)

With this ideology you should still be using an points ignition... are you? Cause why fix something that's not broken, innovation and an open mind are useless right?

Originally Posted by mrlobster (Post 8028813)

Put a set of Honda door seals on my 72 GMC tonight- fit was near perfect, just had to cut it and trim about 1.5" from its total length. The doors shut with just the right amount of effort- no slamming necessary!
I had a set of Precision push-on seals prior and the doors were near impossible to shut. They are a quality product, just didn't fit right for me.

Originally Posted by brian1971 (Post 8351424)

Those look like the wrong year or model,what year did you order.

Originally Posted by volksworld (Post 7996688)

went to grab a set off a 2008 at LKQ today...the seal has an extra inner lip about 3/4 of an inch wide that covers the edge of the upholstery on the honda...not sure if it will touch the metal around the door frame ....looks like it may have 1/4 inch of standoff when installed....unfortunately the car i found had a light grey interior so this lip was grey 3/4 of the way around and black where it went under the rocker trim panel....so i guess these will only work if you find one with a black interior...at least it wasnt the only thing i went there for...

Originally Posted by Hvychvy970 (Post 8351370)

I just ordered some new seals. They don’t seem to have a lip to slide over the door seal channel. Is this what yours look like?

Originally Posted by TKCR (Post 8351561)

https://www.hondapartsnow.com/Page_P...ds=Open%20seal

These are the open seals

Originally Posted by Hvychvy970 (Post 8351571)

Ok. So these are the correct ones? Is gray the only color they make?

Originally Posted by Precision Parts (Post 7996325)

Just an FYI, we make the push on style specifically for the 60-66 and the 67-72 which have the correct radius molded corner. You can see our install video here:

https://youtu.be/Ka5nMS05WIk


- Derek

Originally Posted by panhead59 (Post 8351610)

Why won't precision address the fitment issue ? They make good stuff but are really hurting their reputation with these door seals. IMO

Originally Posted by panhead59 (Post 8351610)

Why won't precision address the fitment issue ? They make good stuff but are really hurting their reputation with these door seals. IMO