Re: Parting a '72 Blazer 4x4
are the rear hangers avail also ? and would they work on a truck frame ? i m looking to swap my 2 wd truck to 4wd.
|
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
Do you have a 4WD radiator shroud, if so how much with shipping to 80925? Would also be interested to see pictures of the tinted K20 wing windows.
Thanks in Advance, |
Re: Parting a '72 Blazer 4x4
Thanks, put me in line for the roll bar. Thanks
Posted via Mobile Device |
Re: Parting a '72 Blazer 4x4
Quote:
I will post pics of the vent windows in the next day or two. Thanks. |
Re: Parting a '72 Blazer 4x4
Orangeblaz, I'm gonna pass on the roll bar. Thanks for giving me first dibs, I appreciate it very much. Thanks, Greg
|
Re: Parting a '72 Blazer 4x4
anything on the e brake parts? thanks no rush
|
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
Quote:
72gmguy is up. |
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
I know it's probably hectic with all the requests, but just wondering if you've had a chance to get some pics of those emblems? Thanks eli
Posted via Mobile Device |
Re: Parting a '72 Blazer 4x4
5 Attachment(s)
Quote:
The other 3 all have issues. One is pitted, one has thin plating, and the plating on the third is peeling. You can take all 5 for $30 shipped. Also, is the piece in the last pic what you're looking for? Attachment 814164 Attachment 814165 Attachment 814166 Attachment 814167 Attachment 814168 |
Re: Parting a '72 Blazer 4x4
3 Attachment(s)
Have 3 rear carpet strips, from worn and scratched chrome, to thin chrome, to non-existant chrome. All have some dings and dents, and one has a nasty screw hole. May be ok to strip and paint, or to replate...
Attachment 814190 Attachment 814191 Attachment 814192 |
Re: Parting a '72 Blazer 4x4
Chuck - are the blue hub dials in good shape? If so, I'd be interested. Pete
|
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
4 Attachment(s)
Pics of top - overall it isn't too bad. Chipped out rear corner on driver's side, small chip on pass side. Drip rails are good. Cracked around one of the hatch hinges, and a little near the the rear corner on the driver's side. Pretty grungy from 15 years in the woods. Includes a better hatch.
Attachment 814354 Attachment 814355 Attachment 814356 Attachment 814357 |
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
Chuck - Also looking for 1) tranny fluid dip stick for TH350 2) Spicer big hub parts from the K20 3) Straight 4wd tie rod for use as a spare 4) Chrome NP205 shifter/shifter knob for spares 5) really good AC center dash bezel
LMK. Thanks again! |
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
Any word on the rear hangers and shock mounts yet? Also does this have a good 4x4 fan shroud? How much do you want for them + shipping to 14075.
Thanks,Marty |
Re: Parting a '72 Blazer 4x4
Quote:
Also, neither truck has a fan shroud. If I come across one I will let you know. |
Re: Parting a '72 Blazer 4x4
Ya that will be fine let me know when you get them off, no rush.
Thanks, Marty |
Re: Parting a '72 Blazer 4x4
Quote:
|
Re: Parting a '72 Blazer 4x4
No Worries, got a great set yesterday on the pickup board.
|
All times are GMT -4. The time now is 06:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com