The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 9 12 3 45678 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   VT cutting up a 72 k5 (https://67-72chevytrucks.com/vboard/showthread.php?t=589726)

1972K20 07-24-2013 10:57 PM
Re: cutting up a 72 k5
 
Do you have the reinforcement plate that goes around the latch for the driver's side?

dansavo 07-25-2013 12:39 AM
Re: cutting up a 72 k5
 
are the rocker box reinforcement plates in good shape? I could deal with a little rot thanks

72k5zl1 07-25-2013 06:41 AM
Re: cutting up a 72 k5
 
5 Attachment(s)
more

72k5zl1 07-25-2013 06:44 AM
Re: cutting up a 72 k5
 
2 Attachment(s)
both lights look same. be back after 330. got home late last night. sorry for delay

72k5zl1 07-25-2013 06:45 AM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by dansavo (Post 6189036)
are the rocker box reinforcement plates in good shape? I could deal with a little rot thanks
look good, getting them off today or tomorrow, will post pic when off

71blksuper4x4 07-25-2013 09:34 AM
Re: cutting up a 72 k5
 
Sure you don't want to sell the rear section? I really really need a rear tail pan from a 72' only. Trevor
Posted via Mobile Device

2003 silverado 07-25-2013 06:49 PM
Re: cutting up a 72 k5
 
Glen are you going to carasile

dansavo 07-25-2013 07:00 PM
Re: cutting up a 72 k5
 
If it saves you any trouble I only need the drivers side rocker box reinforcement, and the pass. side rocker box end cap if you still have it. Thanks

chewysask 07-25-2013 07:04 PM
Re: cutting up a 72 k5
 
Underside seat and seatbelt bracket and the vertical section behind the seats looks good how much?

jaros44sr 07-25-2013 08:33 PM
Re: cutting up a 72 k5
 
Since youve got the bed cut up i could use the second to last cross sill, the one that has a body mount, and bolts through the wheel houses. Let me know condition and price.

Thanks

72k5zl1 07-26-2013 06:38 AM
Re: cutting up a 72 k5
 
had kids last night, mom was out of town till late. got nothing done. will take pics and price after work. thanks

72k5zl1 07-26-2013 06:40 AM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by 2003 silverado (Post 6190014)
Glen are you going to carasile
no, with the 18mo and 3yr old i cant go anywhere. you are boxed and in my truck.

cleszkie 07-26-2013 02:55 PM
Re: cutting up a 72 k5
 
Still intersted in the hard top lighting harnesses. Let me know if you have both sections and shoot me a price. Thanks.

72k5zl1 07-27-2013 09:26 AM
Re: cutting up a 72 k5
 
home all weekend. will try to wrap up everything today and tomorrow. will post up more pics after lunch.

72k5zl1 07-27-2013 07:07 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by 71blksuper4x4 (Post 6185714)
Also interested in hickey tire carrier. I want to put one on the back of my k20. Trevor
Posted via Mobile Device
2003 passed on hickey carrier. will post some pics tomorrow.

72k5zl1 07-27-2013 07:11 PM
Re: cutting up a 72 k5
 
2 Attachment(s)
Quote:
Originally Posted by RideSF (Post 6185817)
How's the grill?
Posted via Mobile Device
nothing perfect, heres some pics.

72k5zl1 07-27-2013 07:13 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by warbucket (Post 6188650)
Looking for this air shutoff and the plastic nut and centering bolt ( I broke this one) its located inside the pass side cowl. wiper motor clip that holds the wiper arms on the motor and uncut rear tail light harness, the one that goes from the lights to the 4 wire on the frame.

http://i47.photobucket.com/albums/f1...ps914faa92.jpg
headed over tonight list. will let you know in a bit.

72k5zl1 07-27-2013 07:15 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by Flint70step (Post 6188887)
Pics of front fenders?Mine got taken out by a young female driver.Looking for original paint to keep my patina.I've been looking for a long time:chevy:

http://i1116.photobucket.com/albums/...g?t=1339358655
http://i1116.photobucket.com/albums/...g?t=1339358745
http://i1116.photobucket.com/albums/...g?t=1339283630
different blue. check out nose with 69 grill. sorry

72k5zl1 07-27-2013 07:17 PM
Re: cutting up a 72 k5
 
1 Attachment(s)
Quote:
Originally Posted by 1rippen6 (Post 6187151)
Rough as in rusty or all bent up any pictures?
here is the rear hold down.

72k5zl1 07-27-2013 07:18 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by dansavo (Post 6190023)
If it saves you any trouble I only need the drivers side rocker box reinforcement, and the pass. side rocker box end cap if you still have it. Thanks
still on list. have to get under it and look better. let you know

72k5zl1 07-27-2013 07:21 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by cleszkie (Post 6188140)
How much for the single wall lighting harness(es) - fuse panel to plug and plug to light fixtures? Thanks.
only have whats in top. still interested?

72k5zl1 07-27-2013 07:26 PM
Re: cutting up a 72 k5
 
Quote:
Originally Posted by 71blksuper4x4 (Post 6189346)
Sure you don't want to sell the rear section? I really really need a rear tail pan from a 72' only. Trevor
Posted via Mobile Device
tail pan? back few inches of bed floor?

72k5zl1 07-27-2013 08:50 PM
Re: cutting up a 72 k5
 
1 Attachment(s)
Quote:
Originally Posted by cleszkie (Post 6191217)
Still intersted in the hard top lighting harnesses. Let me know if you have both sections and shoot me a price. Thanks.
is $35 delivered to much?

72k5zl1 07-27-2013 08:52 PM
Re: cutting up a 72 k5
 
2 Attachment(s)
Quote:
Originally Posted by 1972K20 (Post 6188901)
Do you have the reinforcement plate that goes around the latch for the driver's side?
the whole tower or cut it open?

72k5zl1 07-27-2013 08:54 PM
Re: cutting up a 72 k5
 
1 Attachment(s)
Quote:
Originally Posted by 72k5zl1 (Post 6192729)
headed over tonight list. will let you know in a bit.
fail! on my part. sorry broke it taking it out


All times are GMT -4. The time now is 11:01 PM.
Page 3 of 9 12 3 45678 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com