The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Parting out 72 GMC K20 4x4 350-TH350 (https://67-72chevytrucks.com/vboard/showthread.php?t=612991)

musclecarfreak 01-23-2014 10:36 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
I would take both rear shock mounts, both rear-rear spring hangers if you have them. I also desperately need the intermediate crossmember, if the first person doesn't take it! Shipped to 64029. Thanks! Todd

Vintage Windmills 01-23-2014 11:24 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Hi, can you send me some pics and info of the 71 K20 truck?

tll74 01-24-2014 02:49 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
rusty knuckles Rod, it's yours. 16.00 shipped

freakshow108, No problem. Thanks for letting me know.

musclecarfreak, Todd, Sorry the cross member is sold. I do have both of the rear-rear spring hangers. I'll get shipping cost Friday.

Vintage Windmills Sure, it will be this weekend probably Sunday night. Swap meet sat and daylight for pics on Sunday.

CUSTOM/10 01-24-2014 06:32 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
PM. Sent

musclecarfreak 01-26-2014 10:20 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Pm sent

tll74 01-26-2014 01:41 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
5 Attachment(s)
pics of GMC letters for Sandtrap9072

slikside Steve, sorry no shift levers separate from columns.

tll74 01-26-2014 01:59 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
5 Attachment(s)
1971 GMC K20 pics for Vintage Windmills

Pretty clean ol truck. It has a Goodwrench crate 350 with 22k on it, front clip is very nice, needs RH inner fender, LH door has rust wear it meets the cab seal on the inside down low front, RH door nice, gate nice but has full piece of 1/4" plate welded to the inside, box is ruff inside and has rust where the dirt settled between the saddle tank and box side, cab needs rockers and portion of floor where they meet (typical), 4sp-NP205-D60. I bought this to part out years ago and just can't do it. It is to nice of truck.

Sandtrap9072 01-26-2014 02:05 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
How much are you looking to get for the gmc letters?

jimer1964 01-26-2014 02:09 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
man you got some trucks!

teeitup 01-26-2014 04:51 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
man Tom, your killing me seeing all those trucks you have;)

jbrogan 01-26-2014 07:46 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
I'm interested in the chrome eyebrows if you still have them, I also am looking for the little rubber pieces that goes between the radiator and the mounts. Thanks

tll74 01-27-2014 01:35 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Sandtrap9072, I have them priced at 15.00 shipping in a flat rate box would be 6.00.

Randy, remember my dream? :lol: I just wish I had the time to part them as fast I buy them like you. You flat get it done! Your seeing about a 3rd of them.

brogan, The fender eyebrows are sold. I would have the rad cushions but only with the mounts.

Thanks, Tom

Vintage Windmills 01-27-2014 09:52 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Thanks for the pics of the K20. If you could PM me a price, and info on paint/body condition that would be great.

teeitup 01-27-2014 10:25 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
It looks pretty good Jud!!!!!!!!!!!!!!!!!

teeitup 01-27-2014 10:26 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Tom, I would be in HEAVEN parting all your trucks out!!!!!!!!! lol

DeadheadNM 01-27-2014 10:48 PM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Tom wins!! Next time I visit Eugene I want to drop by and find a new 4x4 project :)

tll74 01-28-2014 02:32 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
LOL!!!

Pete, you got a open invitation anytime to stop by and see the stash. We can hang out in the trophy room (the shop) share hunting stories while we look at the mounts on the wall. Maybe I'll post some pics for a warm up. BTW bring a trailer. :lol:

Randy, Don't forget you already got a piece of "heaven" from the stash. Man I could sure use you for a while...you think you could talk to the wife? At your pace a month or so..I'm just saying. :lol:

Jud, Randy says its nice so it must be. PM coming

Ozzy2013 01-28-2014 02:42 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Quote:

Originally Posted by tll74 (Post 6480855)
I just finished parting this one out. A 72 GMC 3/4t 4x4. Most all metal parts have been hot tanked and acid dipped. Media blasting available at no cost on most parts. All prices are plus shipping. Thanks, Tom

NP205-TH350 transfer case. 200.00
Transfer case adapter w/coupler. 125.00
TH350 trans been rebuilt at some time. Nice fuild and clean pan. 250.00

Pic 1
Rear crossmember 40.00
intermediate cross member 45.00
front cross member 25.00
Transmission-transfer case cross member 65.00
cab frame mounts (2 fronts, 2 rears) 20.00 each
front spring/core support mounts 35.00 each LH one is ruff have a good one.
front spring rear shackle mounts 25.00 each
front bump stops w/brackets 10.00 each
front shock brackets 5.00 each
front LH spring stop 10.00
forward rear spring hangers 30.00 each
rear/rear spring hangers 25.00 each (only one in pic)
Front u-bolts with plates 30.00 per side
rear u-bolts w/plates 25.00 each Pic 3
rear bump stops w/brackets 12.50 each
box supports 6 of them 10.00 each
rear shock mounts 15.00 each
rear e-brake cable brackets 5.00 each
front exhaust hanger bracket 10.00
rear hyd brake line bracket 10.00
P/S steering conversion complete 125.00
steering intermediate shaft 25.00
steering rag joint 22.50 nice
fan shroud, minor fan rub on top. can not see when installed 85.00 very nice
original flex fan 10.00
AT pedal hanger and pedal 25.00
e-brake cables, support links, bracket, coulpers and spring. 45.00
transfer case support kit 45.00
trans-tcase rubber mount kit original 27.50
speedo cable minor blem in platisc 20.00 looks very nice
L71-72 RH axle (large u-joint) 75.00 nice
L71-72 LH axle (large u-joint) 75.00 nice
draglink tight ends 25.00
heat riser nice springs works perfect original 25.00
crank pulley 12.50
water pump pulley 2 groove 15.00

Pic 2
oil line 8.00
tail gate hardware on box 25.00
tail gate hardware in gate complete w/bolts 45.00
GMC letters good chrome needs black repainted 15.00
GMC park lamp wiring 10.00 each nice condition
heat stove pipe 12.50
washer hose set 12.50
tail lamp lens 10.00 nice condition
fender-core support triangles 5.00 each
door stricker plates 8.00 each

Pic 3
door panel seal 5.00
door latch rods 3.00 each
amber marker lenses 10.00 each nice color
red marker lens 10.00 nice color
GMC turn lens/housing 12.00 some fade
vent pull rods w/knobs 5.00 each
dome light switch wiring 10.00
fuel tank wiring 8.00
dome light wiring 10.00
inside door handle 5.00
window crank handles 6.50 each tight knobs
tail lamp housings 10.00 each
back up housings 7.50 each
LH outside door handle very nice driver quality 25.00
RH outside door handle chrome peeling 8.00
oil filter adapter 8.00
dip stick sleeve 5.00
heater controls needs center lever I will replace it 45.00
window weather strip channels 10.00 each

Misc pics
C/K20 71-72 power brake conversion 65.00
base black door panels very nice outside one has broken spot for one retainer the other has two melted spots from me heating the nuts to get armrest off. It would still work just fine. 60.00
steering colum black 60.00
4x4 AT tunnel cover 40.00

interested in the hood GMC letters how do you do the transaction?Im at 21921 so shipping would be cheap.Thanks Oz

Ozzy2013 01-28-2014 02:48 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
I will take the GMC emblems hope they are still available just let me know how to pay for them thanks!Oz

tll74 01-28-2014 03:12 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Quote:

Originally Posted by Ozzy2013 (Post 6494798)
I will take the GMC emblems hope they are still available just let me know how to pay for them thanks!Oz

To be fair I must wait on Sandtrap9072 as he just sent me a PM reguarding shipping cost which I answered. I'll give him till this time tomorrow. Thanks, Tom

Ozzy2013 01-28-2014 03:17 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Ok just let me know would you happen to have a 390 cfm holley or other 390cfm putting a 4 barrel on a 250 6 cyl ?If you do what would shipping be to 21921.Hope i get the enblems!lol

JimH2828 01-29-2014 12:17 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Tom, looks like the 4x4 fan shroud in available. I'll take it. Will also think of other items.

Thanks
Jim

tll74 01-29-2014 12:25 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Hi Jim, Yes it is. I'm going to post another thread in a bit. Maybe something in it for you. Thanks, Tom

JimH2828 01-29-2014 12:57 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
Tom, any 205 rubber mounts left? These or others you have.

Thanks
Jim

blackbolt 01-29-2014 01:29 AM

Re: Parting out 72 GMC K20 4x4 350-TH350
 
You have yourself a nice stash!!!!!!! wish you were closer.


All times are GMT -4. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com