|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Same as mine :metal:
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Man, I missed your post, MJ! They look like twins! Other than wrestling on the 1.25 inch sway bar, I'm finally finished with the front suspension! Now time to bend some brake lines and get back to body work!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Rear cab support? Gone! Motor assembly commencing soon...
Making progress at glacier speed, but making progress nonetheless! |
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Inside of what remains of the rear cab support. Good metal. Might try to clean it up and only patch in the outer piece with new metal. Slowly backing into replacing the inner and outer rocker.
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
That Christmas wrapping paper is custom... Good for at least 48 HP.
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Progress! Engine is coming together:
http://67-72chevytrucks.com/vboard/s...=1#post7950504 Transmission purchased and rebuilt with Viper internals and front shift. |
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
Good story. Good luck on progress :)
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Thanks! Obligatory motor pick. Valve covers coming today!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Engine nearly done!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
:metal:
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
Nice
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
3 Attachment(s)
Engine Ready. Transmission Ready. Patched and painted firewall.Installed disc/disc 12” double diaphragm brake booster from a 2002 GMC Sonoma, and CPP master with disc/disc prop valve. Installation was a breeze with Captains bracket for converting to hydraulic brakes! On a related note, I now have all the hydraulics for the T56 clutch! Oh, and washed the windshield!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Turning some attention to the interior.
The speaker is shot! |
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Ready for new speakers!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
2 Attachment(s)
Drivers front cab support is done. Working on the passenger side. Making small holes into big holes only to discover about a pound ofJefferson County dirt!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
2 Attachment(s)
Only one section of the stock cab support has been eaten by the rim worm. Patch cut, and welded into place.
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Firewall painted inside and out!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
From little holes to big holes to no holes! Entire cab floor nearly done!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Finally have the patches in place! Lesson: it is so much easier to buy patch panels - even I’ll fitting ones - and cut out what you need! Forming my patches to match the stock contours of the floor took more time than anything else! I didn’t weld all the way to the wall as rockers will be replaced soon and I wanted to keep some flexibility for removing the heavily rusted inner rocker panel.
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
Good to see you plugging away. Keep up the good progress. If you didn't already, I'm sure you hate rust now! :lol:
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
Thank you, Sir!
After failing to make significant progress for some time I started trying to just do a little work on her every day (30 minutes to an hour). This has helped massively in comparison to waiting for big chunks of time that never materialized... I hate rust, but it helped me become a much more confident welder! That said, this is why I’m painting everything in tons of POR15! I don’t want to do this again in 50 more years when I’m 90! |
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Pinholes filled, weld ground down. Cab floor = DONE!
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
2/3 of the inner cab floor and firewall painted! :metal:
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
1 Attachment(s)
Scored a 67 deluxe seat to rebuild! :metal:
|
Re: Travis' Tribute Truck - 65 Chevy C-10 Camper Special
Scored a 67 deluxe seat to rebuild! :metal:
|
| All times are GMT -4. The time now is 03:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com