Re: For sale: Hand-Made Custom LED Brake lights.
 

Sounds good Justin. Please post your prices for the 67-68 turn signals once you got it figured out. I'm interested.

Re: For sale: Hand-Made Custom LED Brake lights.
 

Justin, the GMC lights are heading my way as we speak. Send me yer email and I'll send you a pick.
Dan

:flag: :gmc: :burnout:

Re: For sale: Hand-Made Custom LED Brake lights.
 

So i got a lense from Arad68, and i built a 67-68 LED front turn signal. They will house 14 columns of six LEDs for a total of 84 per side and 168 per pair. They will cost $65. Thanks alot!
Justin
http://i174.photobucket.com/albums/w...s/PA300005.jpg
http://i174.photobucket.com/albums/w...s/PA300008.jpg
http://i174.photobucket.com/albums/w...s/PA300009.jpg

Re: For sale: Hand-Made Custom LED Brake lights.
 

Do you have any left, tail lamps and back ups for a truck?

Re: For sale: Hand-Made Custom LED Brake lights.
 

I'm not certain i know what your question is, but i can make pretty much any LED insert for a 67-72 chevy or gmc truck/suburban with the exception of sidemarkers, and i can even make those. I choose not to sell them because it requires re-wiring of the truck and 194 pigtails which i'm unable to fabricate, and they only work behind the custom deluxe or 85 van lenses.
Justin

Re: For sale: Hand-Made Custom LED Brake lights.
 

they are looking great,Justin. I still have to get that console in the mail to ya...

Re: For sale: Hand-Made Custom LED Brake lights.
 

PM sent

Re: For sale: Hand-Made Custom LED Brake lights.
 

Put me in line for a set of front turn signals and the brake lights. I have a 1969 chevy truck with clear front turn signal lenses and clear brake light lenses.

Re: For sale: Hand-Made Custom LED Brake lights.
 

Hey guys, I have discovered something interesting about my LEDs this week. If you install a pair of my LED brake lights AND front turn signals, you will need a "no-load" flasher. If you only have Brake lights, disreguard the rest of this post because the electronic flasher avliable at o'reily's is more than adequate for only LED brake lights. By installing my front turn signals, you are replacing the high current bulb, with a LED that pulls very little current. The turn signal flasher relys on current flow to trip, and because they require less current, the flashers dont trip. This is why the need for a "no-load" flasher. They will trip no matter how much current is flowing through them. Here is a link to an ebay store where they can be bought. If you dont have an ebay account, let me know and i will order you one and include it in your LED order. I'm sorry if this causes any misunderstandings or confusions. I wish they were available at a local store or something. I believe that any of the "LED Flashers" on ebay with two prongs similar looking to the original flasher will probably be sufficient.
http://cgi.ebay.com/ebaymotors/NO-LO...spagenameZWD1V
http://www.thehoffmangroup.com/largeimages/FF552NLF.jpg
This one may possibly work, because it specifically says that it is to be used with LEDs.
http://home.comcast.net/~velocityusa/flasher2.jpg

Re: For sale: Hand-Made Custom LED Brake lights.
 

Here is another link for LED flashers that should work with your setup. Whether it be LED & 12V incandescent bulbs (#40006) or 100% LED's (#90650).

http://www.rodworx.com/products.php?scatid=28

Re: For sale: Hand-Made Custom LED Brake lights.
 

I've recently started doing 71-72 front parking lights as well. They are $80 a pair. They currently have 19 columns of 6 and 6 columns of 3, 118 per side and 236 per pair. :cool:
http://i174.photobucket.com/albums/w...s/P1200110.jpg
http://i174.photobucket.com/albums/w...s/P1200109.jpg
http://i174.photobucket.com/albums/w...s/P1200112.jpg
http://i174.photobucket.com/albums/w...s/P1200113.jpg

Re: For sale: Hand-Made Custom LED Brake lights.
 

Justin, have you tried the parts store EL-12 flasher?. I use that one and currently running about 750 total LED's with no problems. :metal:

Re: For sale: Hand-Made Custom LED Brake lights.
 

TTT just cause there nice!!!!!!

Re: For sale: Hand-Made Custom LED Brake lights.
 

If/when I get some extra $ i'd like to have some of these!
I'm down your way once in a while at Fingerlakes park riding 4 wheelers. Can ya make 'em without the bulb insert? I'd rather use a weatherpack plugin if I could. The sockets are what I always seem to have problems with.

Do the reverse lights light up things farther away than the stock bulbs?

Re: For sale: Hand-Made Custom LED Brake lights.
 

Hey Justin, How Much Are You Getting For Back-up And Gmc Turn Signals. How Much Is The Second Flasher Unit Going For, Also Where Can I Get One? The Tail Light's Are Working Awesome, Thanks Daren.

Re: For sale: Hand-Made Custom LED Brake lights.
 

Most definately, I can do anything you guys want!! I know where finger lakes is. The reverse lights in my opinion do shine further than the stock bulbs. Most of all, they are much more noticable to people behind you!! They kind of have a slight blue tint to them, like a "cool blue" color that just looks awsome! Better put your sunglasses on!! Keep in mind, this picture is in broad daylight. At nighttime it's like looking into the sun....
http://i174.photobucket.com/albums/w...hts/LED017.jpg

Re: For sale: Hand-Made Custom LED Brake lights.
 

how much for a full set of lights for 71, tail light, back up lights, and turn signals shipped to 31216. also the turn signal leds for front are yellow? just want to make sure since I have the clear covers.

thanks, Nate

Re: For sale: Hand-Made Custom LED Brake lights.
 

Have you tried using the white LED's for the tails instead of red? seems like they would shine brighter through the red lense, then red shining through red

Re: For sale: Hand-Made Custom LED Brake lights.
 

also, is there anyway to have them where just these lights are the running lights... and the outside ones are brake and turns?

Re: For sale: Hand-Made Custom LED Brake lights.
 

A pair of reverse lights are $50 and GMC's are $70. Shipping is $8 to anywhere in the lower 48 states. I don't have any flashers in stock, i usually let you guys pick those up. The ones i use can be bought at any O'Reily's Auto parts for about $9. The problem arises when LED front turn signals are used in conjunction with LED brake/turn signals. There just isn't any electrical flow through the system to trip the flasher. A "no load" flasher is necessary in this situation, but you just have brakes and the O'Reily's flasher should work just fine.

Brake Lights are $90
Back ups are $50
Turn signals are $40 a piece and can only be used behind custom deluxe or 85 chevy van lenses, and require a little wiring on your part to install.
Shipping is flat rate $8 anywhere in the lower 48
Yes the front turn signals are yellow/amber. The back are Red.
I'll need to know which style sidemarkers you are using so that i know which style to make.

I haven't tried using white LED's behind them yet, mainly because whites are more than three times the cost of red LEDs. The red LEDs create a more Pure RED light behind red lenses, I would imagine the whites would make a more pink color as compared to RED/RED, but mainly the cost of the LEDs themselves.

Ahh "Caddy-Style"!!!! Yea I can do that, but the price will be a little more because they will require more resistors and planning. I would also need a 50% down payment because they are one-off's and i most likely wouldn't be able to resell them if payment wasn't recieved. I've had to start requiring 50% ahead on one-off's because I've made some and got stuck with them.

Re: For sale: Hand-Made Custom LED Brake lights.
 

I feel the need to try to organize pictures pictures of everything i can do so here goes:
67-68 Front turns
http://i174.photobucket.com/albums/w...s/PA300005.jpg
http://i174.photobucket.com/albums/w...s/PA300009.jpg
69-70 Front turns
http://i174.photobucket.com/albums/w...s/PA240235.jpg
http://i174.photobucket.com/albums/w...s/PA240240.jpg
71-72 Front turns
http://i174.photobucket.com/albums/w...s/P1200109.jpg
http://i174.photobucket.com/albums/w...g?t=1200879143
GMC Front turns
http://i174.photobucket.com/albums/w...s/PB250128.jpg
http://i174.photobucket.com/albums/w...s/PB250130.jpg

Re: For sale: Hand-Made Custom LED Brake lights.
 

It looks like things are really coming along for you. Keep up the good work, and maybe we can meet at a show or cruise-in. Are you going to have a booth at the swap meet in Columbia coming up?

Re: For sale: Hand-Made Custom LED Brake lights.
 

Hey Justin, Will Definitely Get Those Gmc Turns And Back-up Lights Bought In Near Future. Thanks Daren

Re: For sale: Hand-Made Custom LED Brake lights.
 

all of the lights you make rock do you happen to have a lay a way program.......lol.Seriously though you really need to bring alot of them to the board meet in july though.it will give peopl time to save and pick them up there.

Re: For sale: Hand-Made Custom LED Brake lights.
 

Hadn't really thought of that... might have to try to make extras.
Justin