|
Re: Pics and specs of lifted blazers
Quote:
|
Re: Pics and specs of lifted blazers
No that section of the fender does not attach to the core support.the upper and middle sections of the fender will support the core support and keep it from moving around on you.
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
71 Blazer with 6" susp. 3" body and 38's on 15x12 wheels Attachment 860177
|
Re: Pics and specs of lifted blazers
johnnywagon i use to have two copilots that age years ago,i had a coupla blazers years ago couldn't go any where with out my two copilots.great times
|
Re: Pics and specs of lifted blazers
2 Attachment(s)
*****update*****
7" lift on 35x12.50r15 bfg km2 |
Re: Pics and specs of lifted blazers
1 Attachment(s)
4 inch lift. 33x18x12.5
|
Re: Pics and specs of lifted blazers
Ok I'll play again...my other post is full of red xx
4" Rancho up front 5.5" Superlift "SuperRide" rear 3" Bodylift 1Ton Locked https://lh4.googleusercontent.com/-l...0/100_1505.jpg https://lh3.googleusercontent.com/-l...0/100_1538.jpg https://lh5.googleusercontent.com/-M.../s640/pic2.jpg https://lh5.googleusercontent.com/-h.../s720/sr06.jpg https://lh4.googleusercontent.com/-P.../s720/sr03.jpg :mm::chevy::mm: |
Re: Pics and specs of lifted blazers
|
Re: Pics and specs of lifted blazers
hey burt, any Sheet metal cracking due to the body lift and flexing? Ive heard of 80s k5s having the problem in the door jams
|
Re: Pics and specs of lifted blazers
Quote:
Keep in mind I do wheel the rig perrty hard so the body and doors are no longer straight or lined up that well and my rockers have been replaced with steel sliders. :metal: :mm::chevy::mm: |
Re: Pics and specs of lifted blazers
Quote:
|
Re: Pics and specs of lifted blazers
Quote:
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
Got the lift on my 1985 K5 blazer last night, 4-5 inch spring lift on front, 3-4 inch block lift on back... Also replaced all the bushings on it last night also, hard job but drives like a pup now!![ATTACH]:gmc2::gmc2:[/ATTACH]
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
6" with 39.5x15
|
Re: Pics and specs of lifted blazers
Is it just me or do some of the 4" lifts look the same height as some of the 6" lifts??
Posted via Mobile Device |
Re: Pics and specs of lifted blazers
Your exactly right GMC-YA68. Except the 6 inch is about $150 more. And harder on your engine, tranny, universal joint, etc. the 4 inch is perfect for height, money, and also so you dont have to replace a part on your truck every other month.
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
8 inch skyjacker soft ride Springs. 37x13.50x18 mud grapplers.
|
Re: Pics and specs of lifted blazers
Quote:
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
'70 CST
The lift was on this truck already.....I got the part# off the BDS spring... it says 4" on a 69-72 but it specs it as a 6" on later models...? Looks like 6" to me but I'll have to ask my wife.......:lol: 35 x 12.50 x 15 Mikey Thompson Baja Claw on Level 8 15 x 10 wheels... Attachment 1526789 |
Re: Pics and specs of lifted blazers
3 Attachment(s)
3 .5 rough country lift $339 on eBay with shocks tire is bfg ko2 33 x 1250 15 wheels 15x12 acloa
|
Re: Pics and specs of lifted blazers
Quote:
|
Re: Pics and specs of lifted blazers
5 Attachment(s)
'72 Jimmy 4x4 with 4" lift, 35" tires and a 454 to get all moving. This was before the new lift (Same height). The old springs were sagging. I will add the new pics once I finish the other upgrades and get her rolling again.
|
Re: Pics and specs of lifted blazers
1 Attachment(s)
2½" lift.... 33 x 12.50...on 15x8 rallys
Attachment 1851742 |
Re: Pics and specs of lifted blazers
2 Attachment(s)
71 Chevy
4" all spring lift 35 x 12.5 R16.5 Parnelli Jones on American Wheel 16.5 x 8.25 hurricanes. :smoke: |
Re: Pics and specs of lifted blazers
1 Attachment(s)
Pretty sure it’s 6” with 35x12.50R15 1972
|
| All times are GMT -4. The time now is 05:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com