The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - CA Parting Out 86 Scottsdale 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=364928)

bigdnew

11-15-2009 07:52 PM

Re: Parting Out 86 Scottsdale 4x4

PM sent

sailed2japan

11-15-2009 08:37 PM

Re: Parting Out 86 Scottsdale 4x4

Sorry, I thought it was a tilter. How much would you want for the pedal assembly and associated goodies to turn a auto to a stick?

burbanguy

11-15-2009 09:36 PM

Re: Parting Out 86 Scottsdale 4x4

Do you by chance have a rear end w 373 gears for my 87 Suburban?

KrazyRay

11-15-2009 11:30 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by burbanguy (Post 3621897)

Do you by chance have a rear end w 373 gears for my 87 Suburban?

Yes, I have a 10 bolt posi with 3.73 gears, 6 lug. Also, I have the front axle.

KrazyRay

11-15-2009 11:35 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by sailed2japan (Post 3621791)

Sorry, I thought it was a tilter. How much would you want for the pedal assembly and associated goodies to turn a auto to a stick?

Let me know what all you need. I have everything to do the changeover with a hydraulic clutch....pedals, master cylinder, lines, slave, and bell housing.

sailed2japan

11-16-2009 08:29 PM

Re: Parting Out 86 Scottsdale 4x4

I need the pedals, master cylinder, and lines. I'd also like to pick up the rear spring hangers.

burbanguy

11-17-2009 12:29 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by KrazyRay (Post 3622196)

Yes, I have a 10 bolt posi with 3.73 gears, 6 lug. Also, I have the front axle.

How much u want 4 the setup? Also, How many miles? And by chance do u have rims?

KrazyRay

11-17-2009 01:21 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by sailed2japan (Post 3623596)

I need the pedals, master cylinder, and lines. I'd also like to pick up the rear spring hangers.

I can do $40 plus shipping but I don't know if the master needs a rebuild. I don't have the rear hangers unless you need the rear hanger for the front springs. Thanks, Ray

KrazyRay

11-17-2009 01:25 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by burbanguy (Post 3624784)

How much u want 4 the setup? Also, How many miles? And by chance do u have rims?

The pair of axles is $300 or $150 per axle. The odometer shows 53k but I suspect that to be 153k. I can throw in some junk wheels/tires if you need them to roll. The reason I bought this truck was for the rims for my 71 shortbed 4x4. Thanks, Ray

bigdnew

11-17-2009 01:37 PM

Re: Parting Out 86 Scottsdale 4x4

how do want payment for the two striker patches.

ECU PIRATE

11-17-2009 05:53 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by KrazyRay (Post 3550434)

more pics..

What can you do for the brake / clutch pedal assmebly and all of the assorted linkage ( frame Z bar bracket, Z bar , clutch pedal return spring, clutch fork return spring, frame side ball stud & block side ball stud, upper & lower push rods)? Seems like a lot but, I am trying to cover my bases and plan this project well. I am looking to do a manual trans swap on my 77' 2wd Blazer project.

Mike

KrazyRay

11-17-2009 06:30 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by ECU PIRATE (Post 3625260)

Sorry, I don't have the linkage style clutch.

bigdnew

11-17-2009 08:20 PM

Re: Parting Out 86 Scottsdale 4x4

pm sent

bigdnew

11-17-2009 08:21 PM

Re: Parting Out 86 Scottsdale 4x4

in the pics you can see some really cool old chevy floor mats. are you they in good shape and would you sell them.

sailed2japan

11-17-2009 08:59 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by KrazyRay (Post 3624868)

I can do $40 plus shipping but I don't know if the master needs a rebuild. I don't have the rear hangers unless you need the rear hanger for the front springs. Thanks, Ray

Deal on the clutch stuff. I need all 4 hangars for the rear springs.

thirdstreettito

11-17-2009 09:09 PM

Re: Parting Out 86 Scottsdale 4x4

How much for all the clutch assembly and linkage?

KrazyRay

11-20-2009 01:30 AM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by bigdnew (Post 3625512)

in the pics you can see some really cool old chevy floor mats. are you they in good shape and would you sell them.

I'm going to keep them. Thanks, Ray

KrazyRay

11-20-2009 01:32 AM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by thirdstreettito (Post 3625619)

How much for all the clutch assembly and linkage?

ECU PIRATE has 1st dibs on that. This truck is hydraulic clutch. Thanks, Ray

KrazyRay

11-20-2009 01:37 AM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by ECU PIRATE (Post 3625260)

I have an 80 c10 that rolled in today. Its a 6-250 with a manual 3 speed. I'll check by this weekend if all of the clutch stuff is there. Thanks, Ray

KrazyRay

11-20-2009 01:48 AM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by sailed2japan (Post 3625591)

Deal on the clutch stuff. I need all 4 hangars for the rear springs.

I'll get you a shipping quote this weekend. What is your zip? Thanks, Ray

sailed2japan

11-20-2009 09:25 PM

Re: Parting Out 86 Scottsdale 4x4

78660, no rear hangars?

KrazyRay

11-20-2009 09:30 PM

Re: Parting Out 86 Scottsdale 4x4

Quote:

Originally Posted by sailed2japan (Post 3630923)

78660, no rear hangars?

Sorry, the rear hangers are gone. Thanks, Ray

KrazyRay

11-21-2009 02:15 PM

Re: Parting Out 86 Scottsdale 4x4

1 Attachment(s)

Quote:

Originally Posted by sailed2japan (Post 3630923)

78660, no rear hangars?

The shipping will be $12 for a total of $52 shipped. Thanks, Ray

WestButteTruck

11-22-2009 07:29 PM

Re: Parting Out 86 Scottsdale 4x4

Any cargo lights?

benoit454

11-23-2009 07:25 PM

Re: Parting Out 86 Scottsdale 4x4

was it an a/c truck?

All times are GMT -4. The time now is 11:47 AM.

Page 3 of 6

Show 40 post(s) from this thread on one page