![]() |
Re: 1980 chevy long bed!
Im only 16.
|
Re: 1980 chevy long bed!
remember im 15
but we got out of school last week |
Re: 1980 chevy long bed!
Cause your lucky.. Tommorrow is our last day. lol.
|
Re: 1980 chevy long bed!
haha that sucks
when do you go back |
Re: 1980 chevy long bed!
4th..
|
Re: 1980 chevy long bed!
so do we :metal:
we had half days thursday and friday |
Re: 1980 chevy long bed!
Lucky...
|
Re: 1980 chevy long bed!
haha
dang your already at 85 posts look at you go:D |
Re: 1980 chevy long bed!
Quote:
Quote:
the truck does nto have 3/4t axles in the pic. a 3/4t d44 is exactly the same axle shafts as a 1/2t, there is absolutely no gain in swaping in a front 3/4t other than matching wheel patterns. and if you flip the little arms down and put a load on it you are going to bend your axles. those little arms are going to keep the suspension from squating but are going to do absolutely nothing for axle wrap which is the real parts buster. |
Re: 1980 chevy long bed!
What do you suggest then?
|
Re: 1980 chevy long bed!
PICS!!
Heres the Manifold Im going to buy. Needs some cleaning but getting a good deal I think http://i924.photobucket.com/albums/a...x4/Chevy11.jpg Heres The rust on the Rocker panel That Im gonna fix in auto body before to long.. (notice the carpet thats in it... Lol ) http://i924.photobucket.com/albums/a...4x4/Chevy7.jpg Heres the Interior.. (Being replaced... Any suggestions comment.) http://i924.photobucket.com/albums/a...4x4/Chevy8.jpg Engine pics!! No edelbrock manifold.. I was lied to.. But it had a four barrel carb still. http://i924.photobucket.com/albums/a...4x4/Chevy9.jpg Andd... http://i924.photobucket.com/albums/a...x4/Chevy10.jpg Heres the other 327 Im gonna pull and rebuild.. Parts wise What should I get? Its got 283 heads.. http://i924.photobucket.com/albums/a...ith4x4/GMC.jpg |
Re: 1980 chevy long bed!
hey thats a quadrajet
and i say keep the bucket seats and get em recovered and keep the steering wheel |
Re: 1980 chevy long bed!
Whats a Quadraject? ehh?
I wanna bench. I like the girl freind in the middle to much. lol. I may sell the buckets. I love the Steering wheel. Maybe stain it? |
Re: 1980 chevy long bed!
1 Attachment(s)
That holley Hi-rise intake will be a million times better than that stock intake. The 283 heads are most likely power pack heads (they have two triangles cast in the side of them ^^) or a set of "doublehump" heads which have two humps cast in the side of them.
EDIT**** So what kind of car is that other 327 in? |
Re: 1980 chevy long bed!
Quote:
heres a link to some info http://www.hotrodders.com/forum/powe...eads-3692.html |
Re: 1980 chevy long bed!
The other 327 is in my dads 1 ton gmc haytruck he bought when he was 18(hes 50 now) and its been sitting since he was 20-30. So Its gonna take some work. Im pretty sure there power pack heads..
chlsnk- The holley high rise comes with a edelbrock 600 carb... All for only 150 dollars. |
Re: 1980 chevy long bed!
So chlsnk are you telling me they are good heads cause gage told me they arent worth working on and to buy new ones. I think Im beleiving gage. No ofenense.
|
Re: 1980 chevy long bed!
Powerpack heads dont flow worth a s*** and are pretty much worthless except for mabey a nostalgia hotrodder. The double hump heads flow pretty decent for being a stock head but you would be much better off finding a set of vortec heads which flow 10x better than the double humps.
Double humps also dont have any acc holes soo you are limited there too. I'm going to run a set of double humps for now because I have a set in amazing condition with 2.02/1.6 valves and all Im going to do it clean up some of the casting burrs and throw a set of roller tip rockers on them. These heads will flow much better than the smog 305 heads i'm running now. If I were you I'd save up for a set of good aftermarket heads. Slap a set of 1.5/1.6 roller rockers on these edelbrock heads http://www.summitracing.com/parts/EDL-5073/ and you could really unleash that 327 for about $1000 thats a killer deal! |
Re: 1980 chevy long bed!
lol yeah I looked at these same heads the other day.. Dam 1000 dollars.. Thats more than I paid for the truckk..
|
Re: 1980 chevy long bed!
well do you want power? :D
|
Re: 1980 chevy long bed!
Yeeahhh... And I need money though. Like I said Gage I need to go search the salvage yard for treasures.. Maybe today.. Im lazy though.
|
Re: 1980 chevy long bed!
Check the local yards and swap meets for some real nice deals on parts. Heck check the Parts board on the board.
Looks like a fun project, and my vote would be for gunmetal grey! |
Re: 1980 chevy long bed!
Thanks! I was thinking the same.
|
Re: 1980 chevy long bed!
With trucks you gotta pay to play.
|
Re: 1980 chevy long bed!
exactly thats why my truck still looks the same as it did 6 months ago
|
All times are GMT -4. The time now is 02:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com