The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)

- - Tami's 51 build (https://67-72chevytrucks.com/vboard/showthread.php?t=428878)

Re: Tami's 51 build

Quote:

Originally Posted by Tri5Nerd (Post 4425986)

I would be interested in a set if it will work on the large bearclaws, it looks like you are using the small ones.

Tri5

................Me three !!!

Re: Tami's 51 build

Everything is looking good man, keep up the good work.

Re: Tami's 51 build

Hmmm, I deleted part of my previous post, afraid I might get yelled at for "offering up a part"? you know, selling things... so... what if I just built a couple pair and let you guys have them for cost?
Think I'd get in trouble for that?

edit:
got in trouble..guess there's always ebay

Re: Tami's 51 build

Quote:

Originally Posted by skip99 (Post 4427654)

I'll post a pic today, I got mine here...
http://reviews.tractorsupply.com/051...ws/reviews.htm

it won't shear heavy gauge metal, but it will bend nice and roll sweet !!
tractor supply had one left, I offered them $300 and they took it.
I would like to of had separate machines to do heavier metal, but I need the room also..plus smaller pieces do really make up 99% of what I need to do.

For $300 I think you stole it. I was shopping for a planishing hammer last night and came across one like yours and it was just over $1,000
I think they claimed it would shear 36'' of 16 gauge

Re: Tami's 51 build

this one wouldnt do 36" of 16, it would do small 18 g. and a full 30" ? of 20. so it is a lighter machine. but hey. $300 , right?

Re: Tami's 51 build

got around to finishing up at least one side of door handles..
I put in a pic of the connection at the latch, just elongate the hole in the strap ,and allow it to slide about 3/8 inch. that way it will open from the inside and then lock using the original setup.
http://i488.photobucket.com/albums/r...P1010005-2.jpg
http://i488.photobucket.com/albums/r...P1010003-2.jpg
http://i488.photobucket.com/albums/r...P1010002-3.jpg
http://i488.photobucket.com/albums/r...P1010001-5.jpg
http://i488.photobucket.com/albums/r...P1010004-6.jpg

Re: Tami's 51 build

Re: Tami's 51 build

Thought I would post this as good info.. I looked at other pics and location of steering wheels on here a while back, did the whole measurement thing, and decided I needed a 32 inch column. well I'm 6'2" ,, found a great deal on CL. for a brand new tilt Ididit for $200.
After placing seats and sitting in truck to mock it up, I could have gotten away with a 30" and even a 28 ", thought I would just post a few pics..

there is 4" of 2" tube extending out the firewall
so , really a 30" would allow a little more play if you have alligator arms!

http://i488.photobucket.com/albums/r...P1010007-3.jpg

http://i488.photobucket.com/albums/r...P1010006-6.jpg

http://i488.photobucket.com/albums/r...P1010004-9.jpg

Re: Tami's 51 build

I like the steering wheel....
Nice work.
Marc

Re: Tami's 51 build

this was supposed to be an easy add on. well..it wasnt.
I'll throw in the details in case someone has the same malfunction as me !!

simply going to add power booster for front disc. rear drum. had 2 sets of pedals , one from a 55 or so chevy, and another from ? so, after doing all the measuring, it was apparent the 55 style was too short. so went with the other.
it was 16" long from pivot to pedal. and after research and reading post. it seemed that a ratio of 4.5 was normal for power brakes.

so, I measure down from pivot 3.5 " and drilled the hole for the booster rod connector. then it was just a matter of rewelding the connector to add some length and more thread, so it would reach.
moved the brake light switch. also, had to cut off the old studs on the pedal assembly and welded in an adaptor to go with the aftermarket 8" booster. the did a little cut and shape so the whole thing would connect to the dash.

I have about 5" of pedal travel, and about 1 1/4" master cyl. rod travel.. hope it works?!

http://i488.photobucket.com/albums/r...2/P1010055.jpg

http://i488.photobucket.com/albums/r...2/P1010057.jpg

Re: Tami's 51 build

Skip-

I wondered how your project has been going. Have been able to work on it quite a bit?
Looks good.

Marc

Re: Tami's 51 build

been slow for a while, worked on other things like refinishing a log house..and picked up a 70 dart to paint for a guy..

Re: Tami's 51 build

Very nice build skip. It just needs more Tami.

Re: Tami's 51 build

finally finished? all of the welding on the cab... and got a coat of duraglas on everything. havent been on it much, busy cleaning and staining the house..

we didnt want the total smooth look, so just kinda filled it in places,
filled the vent, put in bear claw latches, smoothed the dash, cut out for radio and vintage air controller, made A/C vents in dash. welded all the seams at door openings, and filled gaps with rod around door. sure doesn't sound like much..oh. and the chop!

http://i488.photobucket.com/albums/r...P1010011-1.jpg
http://i488.photobucket.com/albums/r...P1010012-1.jpg
http://i488.photobucket.com/albums/r...P1010009-3.jpg

Re: Tami's 51 build

Skip
The chop looks like it turned out great. Not bad for your first chop huh..

Marc

Re: Tami's 51 build

Nice job so far! Looks like one she will be proud to own.

Re: Tami's 51 build

So...got a few good days on the truck cab. and kinda got sidelined ..AGAIN ! by a little part for the motor..first...got the cab body work close, and put 2 coats of epoxy on it , which will be followed by 2 coats of featherfill. then it gets pushed aside so I can do a PAYING job..LOL!

the last pic is of the little motor thing I picked up..we'll see if I can do it.. always wanted one...

3" rear, 31/2" front chop
welded rear seam

http://i488.photobucket.com/albums/r...2/P1010016.jpg

http://i488.photobucket.com/albums/r...2/P1010024.jpg

smoothed and relocated stuff in dash..a/c vents built into area below radio and a/c controls

http://i488.photobucket.com/albums/r...2/P1010023.jpg

cowl vent smoothed
http://i488.photobucket.com/albums/r...2/P1010020.jpg

firewall took a lot of work!!
http://i488.photobucket.com/albums/r...P1010019-1.jpg

that little motor thing....

http://i488.photobucket.com/albums/r...P1010005-5.jpg

Re: Tami's 51 build

Skip- The cab looks great. What a difference a little primer makes huh..
Keep up the good work.
Best of luck with the blower..lord knoes that ther is enough room under the hood on these AD trucks.

As a side note, I was able to put 50 miles on my truck last weekend...It felt awesome.....

Marc

Re: Tami's 51 build

from one FF to another that is one nice looking build you have going there

Re: Tami's 51 build

1 piece manual window conversion

It's been a while since I got to work on the 51, had to paint a few money makers !!
The plan was to convert the 2 piece to 1 piece window..the initial info I got was that it was pretty easy, you just needed the 49 type mechanism..WRONG, WRONG WRONG !!!!lol..
I was already committed with these doors( chopped, bear claws)
and couldnt find 49 doors here in ohio anyway..so....here is what I hope is a very comprehensive how to..
(ps..finding 1 piece doors is by far the easiest, if you know ahead of time..)
here we go !!

starting with the original 51..you see the single arm regulator..
http://i488.photobucket.com/albums/r...202/claw15.jpg
this is the mechanism you will need, along with some extra track.
http://i488.photobucket.com/albums/r...2/P1010035.jpg
i used the track from one of the original pieces, and cut it in half.
http://i488.photobucket.com/albums/r...P1010014-2.jpg
you will also need to build a front glass run channel,( or as I found after I built mine, they now make a repro. that is narrow 5/8 just for this..$25 ea. just buy it !!
http://i488.photobucket.com/albums/r...P1010026-1.jpg
if you want to make your own..just copy the rear, and make a extension to mount it to the door. the new front track stans out about 3 1/2 inch from the door jamb. use 22 gauge steel, bend to 5/8 inside for 5/8 felt WITHOUT the metal around the glass.
http://i488.photobucket.com/albums/r...2/P1010040.jpg
here's something you never read...to get the rubber in place for the outside wiper, you need to extend the channel, luckily I had an extra old door and so I separated the 2 pieces of metal, welded on an extension and the tacked it back in the door, I have read where some have simply used fuzzies that fit and glued or dbl, side tape them in.. you cannot screw or rivet like on later cars,
welded in new extension
http://i488.photobucket.com/albums/r...P1010019-2.jpg
http://i488.photobucket.com/albums/r...P1010012-2.jpg
http://i488.photobucket.com/albums/r...2/P1010017.jpg
http://i488.photobucket.com/albums/r...2/P1010018.jpg
close ups of where to drill
http://i488.photobucket.com/albums/r...2/P1010039.jpg
http://i488.photobucket.com/albums/r...2/P1010038.jpg
http://i488.photobucket.com/albums/r...2/P1010037.jpg
track cut from original 2 pc
http://i488.photobucket.com/albums/r...P1010036-1.jpg
templates make it a little easier
http://i488.photobucket.com/albums/r...2/P1010028.jpg
http://i488.photobucket.com/albums/r...2/P1010030.jpg
small track added.. when Installing.. I screwed one side and the pivot the other until the track is level. at the time of install, I'll probably tack it in place.but dont weld it first..
http://i488.photobucket.com/albums/r...P1010027-1.jpg
almost there
http://i488.photobucket.com/albums/r...2/P1010033.jpg
you'll need to fill in this notch, or use 49 style.
http://i488.photobucket.com/albums/r...P1010024-1.jpg
welded up..
http://i488.photobucket.com/albums/r...2/P1010025.jpg
with garnish in place...5/8 wide for glass WITHOUT metal trim around it
http://i488.photobucket.com/albums/r...P1010023-1.jpg
also have to bend up the area where the vent went.
http://i488.photobucket.com/albums/r...2/P1010031.jpg
finished ....I ordered new regulators.. these had busted springs and rollers, but worked for mock up..
http://i488.photobucket.com/albums/r...2/P1010034.jpg

I borrowed this pic, it helped a lot.thanks!!

http://i488.photobucket.com/albums/r...orguts4750.jpg

Now I see why most just went with a power option!!..
also, if you want the metal trim glass, use wider glass run, and felt from a 49.original stuff should work, but again, we chose the hard route, but glass run was easy to find. cr lawrence? has it my local glass guy has it..

hope this helps!!

Re: Tami's 51 build

still building...separated the hood, removed braces, repaired the rust and holes, welded up the seam and smoothed the metal a little.
http://i488.photobucket.com/albums/r...P1010027-2.jpg
http://i488.photobucket.com/albums/r...P1010028-1.jpg

http://i488.photobucket.com/albums/r...P1010037-1.jpg
then,,,started building the bed...had 18g. bent and narrower top rail width, so i can scribe the tube into the stakepockets for a little cleaner, diferent look,
http://i488.photobucket.com/albums/r...P1010036-2.jpg
http://i488.photobucket.com/albums/r...P1010035-1.jpg

and used a plasma cutter for the cutouts where the mini-tubs will go.

http://i488.photobucket.com/albums/r...P1010034-1.jpg

also, added a pic of the gas tank install.. fabbed so it cam be removed from under the bed.
65 mustang tank sits on a sq. tube frame, the the frame is bolted up from underneath.

http://i488.photobucket.com/albums/r...P1010003-8.jpg