Re: 85 crew cab with 97 vortex motor and dash
 

Well thanks for putting that bug in my ear...

Looks great. I don't care for that gen of dash, i prefer the 03-07 classic but it looks GOOD

You got any build pictures and i am not very very curious as to how you did it...

I am most interested in what your options for the HVAC are... Is the wiring harness for all that (the climate control it self) separate and independent of the rest of the truck or do you have to kinda build it scratch?

Re: 85 crew cab with 97 vortex motor and dash
 

I would like to bounce some thing off you...

I REALLY want to do this... but i don't know what would be easier for the sake of the dash/console/seats

Buy two cabs and do a floor pan/fire wall swap... or do what you have done and try to graph the two together piece by piece?

Your far enough into this project you will be able to tell me what you think of the first option. Granted its ALOT more welding, possible "more" work but i am more concerned about the over all fit and finish of every thing...

Your thoughts?

Re: 85 crew cab with 97 vortex motor and dash
 

That is incredibly cool! Keep the photos coming, this will be great to see from start to finish.

Re: 85 crew cab with 97 vortex motor and dash
 

thanks

Re: 85 crew cab with 97 vortex motor and dash
 

ya the 04 dash wont fit because of the dish on the passenger side. but like i said i ran into this dash and got it for free. but if iwere to go out and buy a dash i would have got 07 silverado dash. no pics yet, as you can see the dash is just sittting on wood blocks. not sure what the HVAC is but im thinking its the ac and heater box? i have the full wiring harness from the 07 avalanche so im completely gutting out the 85 and wiring it with the 07 avalanche wiring harness. so im going to have to splice in the lights, windshield wipers, door locks, and the window motors. i think thats about it...


i would definitely not try to swap floor pans or fire wall. my dash fits damn good for just the little trim work i've done. but like i said if i was going to go buy a dash i would get a 07 silverado dash. in my opinion it looks way nicer. all i've done so far is cut out the 85 dash and cut out the humps for the seat in the 85. its way easier to plate in the humps than to redo the floor pan... thats my opinion. i've been welding and fabing for over 10 years and thats just my opinion. let me know what ya think

Re: 85 crew cab with 97 vortex motor and dash
 

Advice taken, thank you.

Yes, HVAC is your a/c and heater... Do you need to have the avalanche ECM in there as well to control every thing?

As for the 04 dash, what about that dish doesnt' make it fit... too wide for the cab or it doesn't match the windshield line as nice?

Re: 85 crew cab with 97 vortex motor and dash
 

right, it won't match the windshield line once you cut it down to fit. what is the EMC? i took everything off the avalache so i should have it. i do belive i can run the dash and interior on its own. i dont think i need anything from the motor harness. but if i do i will have it

Re: 85 crew cab with 97 vortex motor and dash
 

when i say that i would not try to swap the fire wall and floor thats just me. if i would have listen to everyone about me wanting to swap a 07 dash into a 85 i would have never tryed... if you think it would be cleaner and you can pull it off go for it! you wont know if you never try. i know i can get that dash to work in my truck and i know im going to run into some BIG bumps in the road but it will work and will be sick when its done... to me anyways.

Re: 85 crew cab with 97 vortex motor and dash
 

I like that dash! Didn't even think about it fitting so well. I was going to go with a 02-06 but seeing this just changed my mind.
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Oh, so what your saying be the time i trim it to fit flush up against the window, I'll be cutting into that dip it self...

Easy fix, i'd fiberglass that dip in my dash and bring it up to the same level as the rest of the dash. I never cared for it to much to begin with... But thank you for the heads up cause i would have never thought of that till i started into it...

BTW, what are you doing for the rear seat? Most guys i see use the back seat out of an extended cab, but do you think there is enough room to put two buckets back there, matching the front?

Re: 85 crew cab with 97 vortex motor and dash
 

i have the rear seats out of the 07 truck so i plan to use them... I'm sure i'll get them to work I just haven't crossed that road yet

Re: 85 crew cab with 97 vortex motor and dash
 

Your truck's looking good. Sorry we didn't get much time to talk when you were down here.

Re: 85 crew cab with 97 vortex motor and dash
 

so i got the motor and tranny out of that 07 avalanche... now i need to put it in my truck. but i don't want to spend $80 bucks for a adapter. does anyone have one they can measure and let me know the hole locations?
Attachment 811053

Re: 85 crew cab with 97 vortex motor and dash
 

Man first the dash and now the drivetrain. Wish I had your luck!. Is it 5.3 or 6.0?
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

If I had good luck it would have been a 6.0 but its a 5.3
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

5.3 is a good motor. It will have more power than the vortech!
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

That is true and that's what I told myself. It sucks I tore the 97 apart though... in the end I did it for no reason! Oh well
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Just think of it as a good tear down stop to the pr-runner project!
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

I think im just gonna part out the 97... I have too many projects right now and I don't really have the time or room at my house to keep it without it being a eyesore
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Did you ever finish up the dash?
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Not yet.... between work and crappy weather I just can't get any time on her.
I'll keep ya posted.
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Ok thanks.

Cant wait, i finally got mine blown apart and im looking for a dash. Everyone ive found so far has been in a bad roleover and everything is busted.
Posted via Mobile Device

Re: 85 crew cab with 97 vortex motor and dash
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: 85 crew cab with 97 vortex motor and dash
 

[QUOTE=peterpan;5142352]Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks.com/vboard/showgroups.ph



ok

Re: 85 crew cab with 97 vortex motor and dash
 

ok i messed up and mentioned i had parts and was willing to trade and i am not a paying member [B]SORRY[/B

my whole post got deleted for that i can see me leaving this board

your truck looks good with those wheels
i had asked what size wheel was on your truck

good bye