The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   1983 Chevy lwb slow build (https://67-72chevytrucks.com/vboard/showthread.php?t=454329)

Reziel_1983 11-03-2011 10:52 AM

Re: 1983 Chevy lwb slow build
 
I'm torn about what to do to the truck after the engine. I could get the 700r4 transmission rebuilt with a shift kit and a stall converter, or I could get a posi and put in the rear end as it is and open rear end right now, OR I could cut the frame and convert it into a swb, which is what I've always wanted to do to it.

What is your opinion on what I should do? If I convert it to a short bed, should I do fleetside or stepside? I've always kind of liked the look of stepsides, but I also like fleetside!

Reziel_1983 11-11-2011 11:03 AM

Re: 1983 Chevy lwb slow build
 
Well not much has happened since I last posted. Got the valves set and now just need to bolt the intake on. Looks like I won't get to put the engine in this weekend after all though. :waah:

Looking at next weekend to put it in though!

Reziel_1983 11-18-2011 12:36 PM

Re: 1983 Chevy lwb slow build
 
Will start the engine transplant today! I will upload a video of how it sounds after the break-in.

trout 11-18-2011 03:21 PM

Re: 1983 Chevy lwb slow build
 
nice looking motor ya got...... keep it up

Reziel_1983 11-22-2011 12:44 PM

Re: 1983 Chevy lwb slow build
 
Well I put the motor in. Had some issues. Crank was not 10-10 as advertised... so it had a main knocks... pulled motor back out... gonna mic the crank and get the right bearings this time.

Reziel_1983 11-24-2011 11:34 PM

Re: 1983 Chevy lwb slow build
 
5 Attachment(s)
Engine is in, will upload a video soon. I still need to adjust carb/timing.

Reziel_1983 11-24-2011 11:36 PM

Re: 1983 Chevy lwb slow build
 
2 Attachment(s)
Here's my old motor, it's a 350. Also here is my old motor and new one in the same picture.

Reziel_1983 11-25-2011 12:27 AM

Re: 1983 Chevy lwb slow build
 

92GMCDriver 11-25-2011 12:47 AM

Re: 1983 Chevy lwb slow build
 
that 377 sounds mean, how does it do on the bottom end? ive been toying with the idea of building up a 377 in the future but im not a fan of a motor that needs to be run in the upper rpm to have any fun, were you satisfied with it?

Reziel_1983 11-25-2011 12:51 AM

Re: 1983 Chevy lwb slow build
 
To be honest, I haven't really driven it very hard yet, but it definitely kicks more than my old tired 350 :D

92GMCDriver 11-25-2011 01:11 AM

Re: 1983 Chevy lwb slow build
 
thats awesome!! so what do you think you will be doing next to the truck?

Reziel_1983 11-25-2011 01:16 AM

Re: 1983 Chevy lwb slow build
 
I'm not really sure, what do you guys think I should do? I could get the overdrive transmission built with a stall and shift kit or drop it 2 inches all around or maybe convert it to a short bed?

Reziel_1983 11-25-2011 01:20 AM

Re: 1983 Chevy lwb slow build
 
I'm thinking about getting an MSD distributor next also.

92GMCDriver 11-25-2011 01:27 AM

Re: 1983 Chevy lwb slow build
 
if you do a lot of highway driving then i would get the overdrive for sure then lower it like you said, but if i were in your shoes i would leave it long i think long boxes look great with the right stance and wheels.

Reziel_1983 11-28-2011 10:13 PM

Re: 1983 Chevy lwb slow build
 
Got the timing/carburetor set today, I think it's pretty close to where it needs to be, maybe not perfect though. I'll upload a video tomorrow when it's light out.

Reziel_1983 11-28-2011 10:20 PM

Re: 1983 Chevy lwb slow build
 
Also, now that I've set the carb/timing, it has LOTS more power! :burnout:

Reziel_1983 11-30-2011 01:06 AM

Re: 1983 Chevy lwb slow build
 

New video

grayharville 04-18-2012 11:45 AM

Re: 1983 Chevy lwb slow build
 
nice truck! any updates?

Reziel_1983 04-18-2012 01:55 PM

Re: 1983 Chevy lwb slow build
 
No updates as of now. Looking to repaint the truck over the summer when I have some more money to spend on it. Then going to get a more built tranny along with a posi traction rearend. I would like to get somewhere around 3.73 gears.

grayharville 04-18-2012 02:23 PM

Re: 1983 Chevy lwb slow build
 
Posi and 3.73 sounds like fun:metal:

Reziel_1983 06-16-2012 10:40 PM

Re: 1983 Chevy lwb slow build
 
No real updates as of now, but I plan on painting the truck sometime in September hopefully. I might even be able to drop it 2 inches all around whenever I get it painted.

3r!c84 07-07-2012 03:04 AM

Re: 1983 Chevy lwb slow build
 
whats the cam specs ? and what mufflers are you running and is it dummped ? sounds sick!!!

3r!c84 07-07-2012 03:05 AM

Re: 1983 Chevy lwb slow build
 
p.s watch out with that style aircleaner on there. one back fire and they are known to catch fire. just a tip brotha

Reziel_1983 07-07-2012 01:55 PM

Re: 1983 Chevy lwb slow build
 
Quote:

Originally Posted by 3r!c84 (Post 5472968)
whats the cam specs ? and what mufflers are you running and is it dummped ? sounds sick!!!

Cam specs: http://www.compperformancegroupstore...ory_Code=HFTXE

The mufflers are some knock off brand flowmasters... I didn't have enough to buy real ones at the time, haha. Exhaust exits at the end of the truck straight out the back.

Reziel_1983 07-07-2012 01:56 PM

Re: 1983 Chevy lwb slow build
 
Quote:

Originally Posted by 3r!c84 (Post 5472972)
p.s watch out with that style aircleaner on there. one back fire and they are known to catch fire. just a tip brotha

Thanks, I planned on taking that air cleaner off and putting a bigger one on anyways. I'm not a fan of how this one looks.


All times are GMT -4. The time now is 03:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com