Re: 71 blazer getting parted
 

Ryan, not sure size I can check Mon. Thanks Randy

Re: 71 blazer getting parted
 

Zip is 53005 for the air cleaner. Thanks for being honest about the sides... it was a haymaker on my end.

Re: 71 blazer getting parted
 

no rush randy. Im packed all day tomorrow, but free tuesday. Let me know.

Re: 71 blazer getting parted
 

Hi Randy, I'll take the chrome strips and pass on the brackets.
Thanks, Sharpie

Re: 71 blazer getting parted
 

Dzlhead and Sharpie, I'll get quotes Mon after work hopefully
Walts, I'll look after work
Thanks Randy

Re: 71 blazer getting parted
 

Hi Randy,
I am interested in the tailgate weatherstrip retainers...the metal strips that mount on the sides of the bedside just inside the tailgate. Let me know if they are in decent shape. Thanks
John

Re: 71 blazer getting parted
 

Randy, i think bigeasycigars has been looking for a blazer emblem. Lets give him a shot at one or both and let me know what is left. I will pass on the cst and 350 emblems.
Also, i see one rear top hold down, is the other one there?
Thanks, Eric

Re: 71 blazer getting parted
 

How much for the AC ball holder things, w/screws; rear bumper brackets if still available; 6 side panel brackets; and the k5 Blazer emblems if they get to me? All to 94559.

Re: 71 blazer getting parted
 

...and the wood trim pieces if they get to me...

Re: 71 blazer getting parted
 

Randy, put me down for the woodgrain. I'll pass on the lockouts and thanks for getting back to me on the bucket brackets. Trevor

Re: 71 blazer getting parted
 

Randy,
Sounds good will pass on the wheels then. Will take the chrome hubs and one good blue knob, door shims, wait in line for the rear panel chrome, and still interested in a good cig housing. Will pass on the fuel down pipe.
Thanks, Monte

Re: 71 blazer getting parted
 

This is an OEM bumper, not a repop, correct? If its oem, I'll take it. PM me the total charges. Would you have decent shields and a tag holder to go with it?

Re: 71 blazer getting parted
 

Randy put me down for the center dash piece if you cut it up..also, how is the right side wheel house tub? Are those rust spots or oil marks?
Posted via Mobile Device

Re: 71 blazer getting parted
 

kilomanjaro, John, not bad shape, each one has a ding in them. I'll have pics later tonight $10 plus shipping. Thanks Randy

Re: 71 blazer getting parted
 

toomuchstuff, Eric, I'll give him first shot. Only has one rear top bracket. Thanks Randy

Re: 71 blazer getting parted
 

Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry.
Thanks Randy

Re: 71 blazer getting parted
 

71blksuper4x4, Trevor, chrome is yours. Thanks Randy

Re: 71 blazer getting parted
 

47thriftmaster, Monte, chrome hubs and blue knob $20, cig housing $5, 3rd in line on rear panel chrome. Door shims $15 are yours. Thanks Randy

Re: 71 blazer getting parted
 

1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy

Re: 71 blazer getting parted
 

Randy,
got it $40 so far, if you don't mind I'll wait to see what happens with the panel chrome.
Monte

Re: 71 blazer getting parted
 

Dirt72, not cutting center section out of this one, the whole dash will be cut out since it doesn't have the speaker slots on top side. Wheel tubs are junk, sorry. Thanks Randy

Re: 71 blazer getting parted
 

Everyone, Pics of parts coming in a bit, never had a chance to get shipping quotes tonight, sorry. Thanks Randy

Re: 71 blazer getting parted
 

pass side and surface rust down low pass side

Re: 71 blazer getting parted
 

passs side splice

Re: 71 blazer getting parted
 

pass side corner
and driver side splice