Re: 63 SWB C10 LT1/4L60E Swap
 

Started working on the other side of bed. Pretty bad shape. Had lots of Bondo also.

http://i1280.photobucket.com/albums/...pse15f499f.jpg


http://i1280.photobucket.com/albums/...ps551b4cdc.jpg
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Worked on my bed. Now I'll sand blast the bed, spray with epoxy sealer and apply filler to get good and straight. Last I'll spray on high build primer to make sure its perfect. :burnout:

http://i1280.photobucket.com/albums/...psbd8038e3.jpg

http://i1280.photobucket.com/albums/...ps18dfbd15.jpg
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Dude!!!!
Looks like a bunch of Hammer & dolly work was spent there! Along with replacing the lower half of the end cap!
Nice work!!!

Re: 63 SWB C10 LT1/4L60E Swap
 

Yes it was. Thought I was going have to replace the bed panel. The only options are a long bed patch panel and cut it down. Really didn't want to do that. It actually came out really straight.
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

nice skills and work, looking good

Re: 63 SWB C10 LT1/4L60E Swap
 

Finished stripping the paint off to get ready for the epoxy primer.

http://i1280.photobucket.com/albums/...pscec08546.jpg

Started off the day with a voodoo doughnut I brought back from Portland.
http://i1280.photobucket.com/albums/...psd9fbe222.jpg
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts..

Re: 63 SWB C10 LT1/4L60E Swap
 

[QUOTE=FRENCHBLUE72;6010481]Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts..[/lQUOTE]

Yes they do. They guys I work with got the wild ones. I'm in Portland to Eugene almost monthly. Where is Grants Pass located?
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Epoxy primered my bed sides today. I actually got the metal pretty straight, wont need much body filler if any.

http://i1280.photobucket.com/albums/...ps25c7be3b.jpg
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Killer body work. Awesome work on the bed sides.
Looks great.
Im right in the middle of Portland and Eugene. Keizer which is stuck on the north side of salem by the baseball field.
Again. Great job on the box.

Re: 63 SWB C10 LT1/4L60E Swap
 

Thanks bomp, I'm real pleased how the body work is coming . I'm in Oregon all the time. Doing a bridge near Harrison. I'll have to swing by and check out your truck.
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

trsmotrhed, killer work on the bedsides! what color are you going to paint the truck?? keep it up truck looks awesome

Re: 63 SWB C10 LT1/4L60E Swap
 

Thanks chad64, right now I'm wanting to paint it corvette jet stream blue. Wanting it to look like this picture . Might do some silver to break it up.
There's a car show May 4th and trying to get the bed done or at least in primer so I can enter show. It will be a work in progress at the show. :burnout:

http://i1280.photobucket.com/albums/...psadaded10.jpg
Posted via Mobile Device
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Dude!
That is the same color exact that I am currently using on my build!...Along with Mercedes, Irridium silver...Nice taste in color, I have to agree!

Re: 63 SWB C10 LT1/4L60E Swap
 

Also, it will look great with that YZ in the back!!!

Re: 63 SWB C10 LT1/4L60E Swap
 

Your truck looks great in that color blue. The heater knobs are awesome also.
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Nice work, I'm following your build cause I also have a 63 and the LT1/l460e that's sitting in my shop that's going in. But at this point I'm working on my wife's 66 that I have to finish first.
Ernest

Re: 63 SWB C10 LT1/4L60E Swap
 

The corvette blue will look great on it.

Re: 63 SWB C10 LT1/4L60E Swap
 

The metal work on the bed is simply amazing. Outstanding!

Re: 63 SWB C10 LT1/4L60E Swap
 

Very nice, I really like that rich blue, and I agree on the silver

Re: 63 SWB C10 LT1/4L60E Swap
 

Thanks for the comments. As you guys know its alot of work but very rewarding.:metal:
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Very nice job! Nothing like old metal.... Def can't do that to sheet metal these days lol. I like the tuned port too always liked how those looked. Keep up the progress
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Worked on the inside of the bed sides. Had a little rust on one side where the wood bolts to bed. Cut out two pieces and bent them to the right radius.

What I started with.
http://i1280.photobucket.com/albums/...ps8b05b231.jpg


Made this piece that goes new the rear corner.
http://i1280.photobucket.com/albums/...ps95acd0ee.jpg

Cut this piece out and started to weld in the new piece and ran out of shielding gas for my mig. Finish next weekend.
Kinda finished product.
http://i1280.photobucket.com/albums/...psb6794353.jpg
Posted via Mobile Device
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Worked on my bed sides.

http://i1280.photobucket.com/albums/...ps3c23f54a.jpg

http://i1280.photobucket.com/albums/...psdb784b4c.jpg
Posted via Mobile Device

Re: 63 SWB C10 LT1/4L60E Swap
 

Finally got the body work done and painted flat black for now.
http://i1280.photobucket.com/albums/...ps9071ba44.jpg

Reworked a Tahoe fuel door setup.
http://i1280.photobucket.com/albums/...ps29a7675e.jpg

Tahoe fuel door
http://i1280.photobucket.com/albums/...psab381f7f.jpg

Welded some exhaust fittings for the elbow and to reduce to the smaller hose.
http://i1280.photobucket.com/albums/...psf196dd52.jpg
Posted via Mobile Device
Posted via Mobile Device