Re: Cabs Need any cuts, parts etc?!
Quote:
|
Re: Cabs Need any cuts, parts etc?!
Quote:
|
Re: Cabs Need any cuts, parts etc?!
$45 shipped for both sides sounds good. I'll send you the measurements I need after work. Thanks!
|
Re: Cabs Need any cuts, parts etc?!
Quote:
That sounds great Adam. Let me get the exact measurements on the firewall patches and we can ship it all together. Thanks, |
Re: Cabs Need any cuts, parts etc?!
Firewall is not as bad as I thought so I'll pass on that set of patches.
Can you PM me on how you want to handle the greyhound freight for pass thru patches? Thanks, |
Re: Cabs Need any cuts, parts etc?!
PM sent...
Quote:
|
Re: Cabs Need any cuts, parts etc?!
1 Attachment(s)
I need the passengers side 15'' across to the washer tube including the blower motor hole, 3'' wide to the windshield & all the way down. The driver side I need 12'' across to the throttle cable hole & 3" wide to the windshield & all the way down the dog leg.
|
Re: Cabs Need any cuts, parts etc?!
1 Attachment(s)
Driver side.
|
Re: Cabs Need any cuts, parts etc?!
Quote:
Thanks, |
Re: Cabs Need any cuts, parts etc?!
PayPal me (personal) and I will get those cut and shipped out to you...my PayPal is:
playersnmv@aol.com Adam P Quote:
|
Re: Cabs Need any cuts, parts etc?!
Anyone else needing any patches...big or small?
|
Re: Cabs Need any cuts, parts etc?!
Payment sent. Thanks!
|
Re: Cabs Need any cuts, parts etc?!
Adam how much do I owe you, I'll get you paid today. Thank you
|
Re: Cabs Need any cuts, parts etc?!
$40 shipped....is a little bigger than I was originally thinking originally...
Adam Quote:
|
Re: Cabs Need any cuts, parts etc?!
Thank you Adam
|
Re: Cabs Need any cuts, parts etc?!
Payment sent, thanks Adam.
|
Re: Cabs Need any cuts, parts etc?!
Quote:
Thanks, |
Re: Cabs Need any cuts, parts etc?!
Any info on the trim and the a/c box?
Wil |
Re: Cabs Need any cuts, parts etc?!
I can help you with both..I will get pictures taken of both and post them...
Thanks Adam Quote:
|
Re: Cabs Need any cuts, parts etc?!
aftamathe86 - your lo hump patch is cut, boxed, and will get it to the PO tomorrow or Monday.
kaphillips- your divider trim, clips, and gas cap are boxed and will get it to the PO tomorrow or Monday. *Gregg*- Payment received. I will get the firewall pieces cut for you this weekend and have them packaged and shipped asap. 7dee2- your "RV" fill in pieces have been cut, scouring for a box big and sturdy enough to take down to Greyhound for the shipping cost quote. sduckworth13- Payment received. I will get the floor patch cut for you this weekend and have them packaged and shipped asap. |
Re: Cabs Need any cuts, parts etc?!
|
Re: Cabs Need any cuts, parts etc?!
Thanks Adam for the update
|
Re: Cabs Need any cuts, parts etc?!
I need this area.
http://i91.photobucket.com/albums/k3...truckside1.jpg http://i91.photobucket.com/albums/k3...truckside2.jpg I will need it shipped to 20748 zipcode. My drawing on the computer isnt very good, on th elower door jamb i need about 4 inches past the vertical door seam. Can you also post some pics of the drivers side exterior and floor pan, so I can see what else I could use thanks Shawn |
Re: Cabs Need any cuts, parts etc?!
Looks good Adam thank you for the update.. :metal:
Thanks, |
Re: Cabs Need any cuts, parts etc?!
I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.
|
All times are GMT -4. The time now is 11:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com