The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KS Parting a 72 super with tach, tilt, posi (https://67-72chevytrucks.com/vboard/showthread.php?t=660332)

Curtb1971 02-15-2015 10:56 PM

Re: Parting a 72 super with tach, tilt, posi
 
Quote:

Originally Posted by teeitup (Post 7050160)
Curt, is has quite a few cracks, $12 plus shipping

Nick, your 3rd on bumper, I have 2 guys ahead of you. The seat with brackets is $50

Thanks Randy

Hey Randy,
I'll take the steering wheel, I also am in need of the horn button and horn contact if that is available as well. PM your payment info and I'll reply with my shipping address.
Thanks, Curt

Cam1968rsss 02-15-2015 11:32 PM

Re: Parting a 72 super with tach, tilt, posi
 
Hi Randy, if the rear hasn't sold I would be interested in the posi unit.

Thanks
Eddie

68lowburb 02-15-2015 11:37 PM

Re: Parting a 72 super with tach, tilt, posi
 
hey Randy need upper passengerside bed moulding thanks JIMMY

BigRed76 02-16-2015 12:24 AM

Re: Parting a 72 super with tach, tilt, posi
 
1 Attachment(s)
Hi Randy, I need the trim piece circled in the picture. It looks really good in the picture, but can't tell if its black or wood grain, I'm looking for black. Thanks

swamp rat 02-16-2015 03:02 AM

Re: Parting a 72 super with tach, tilt, posi
 
Randy if nobody has taken it i'll take that sway bar and all the mounting hardware with it. I was gonna ask for the A arms and spindles, everything to convert a 67 to disk less the rotors and calipers but guess you won't ship.

chevyguy71 02-16-2015 03:37 AM

Re: Parting a 72 super with tach, tilt, posi
 
If cigarette lighter is available is it lighted type? Can you take some close up pictures of bezel and knob? Thanks Ed.

teeitup 02-16-2015 09:36 AM

Re: Parting a 72 super with tach, tilt, posi
 
Jake1971, Paul, yes he must of replied while you were typing and then I was doing samething when you replied so I missed yours. I already sold the panels since I missed your post, I am sorry about that. I'll try to be more prompt when replying and check to make sure I don't miss guys replies

Curt, for horn button and guts and steering wheel. $20 plus shipping, I will get quote this week if it warms up

Eddie, I have a couple guys ahead of you on it

Jimmy, its beat up and has screw holes

BigRed76, its woodgrain sorry

swamp rat, sway bar is yours, I could ship the alts with it to save you some shipping. Yes sorry I don't part out frontends

Ed, its the stock setup, no light on it

Thanks Randy

Dirt's72 02-16-2015 10:33 AM

Re: Parting a 72 super with tach, tilt, posi
 
Randy is the antenna or radio available? Thanks

Ugly 61 02-16-2015 10:52 AM

Re: Parting a 72 super with tach, tilt, posi
 
Randy I'll take the rail protectors also and I'll call or PM you when I know better when I'll be down. Busy week
Gary

Curtb1971 02-16-2015 10:53 AM

Re: Parting a 72 super with tach, tilt, posi
 
Hey Randy, you sir have a deal. Horn button, guts and steering wheel $20 + shipping. In no big hurry here, just shoot me a pm when you get to it. Thanks again

flaa1a 02-16-2015 10:59 AM

Re: Parting a 72 super with tach, tilt, posi
 
Need high pitch horn. Shipped to 67204

Randy

Ridnhi 02-16-2015 01:54 PM

Re: Parting a 72 super with tach, tilt, posi
 
I am interested in valve covers and oil fill tube. If you are separating them off engine. Also if they are originals. Shipped to 62959. Thanks Eli

teeitup 02-16-2015 02:04 PM

Re: Parting a 72 super with tach, tilt, posi
 
Dirts72, I have a couple guys ahead of you on radio. Antenna is for sale, let me check condition

Gary, sounds good

Curt, I will get with you

Randy, I'll check this one out

Eli, oil filler is sold, valve covers are still for sale $20 plus shipping for pair, with bolts and original washers

Thanks Randy

FlameOut 02-16-2015 02:19 PM

Re: Parting a 72 super with tach, tilt, posi
 
Are the crank and water pump pulleys still available?

flaa1a 02-16-2015 03:26 PM

Re: Parting a 72 super with tach, tilt, posi
 
Make a good deal on engine!? I can come pick up!)
Randy

teeitup 02-16-2015 03:33 PM

Re: Parting a 72 super with tach, tilt, posi
 
FlameOut, sorry the pullies are sold already

Randy, I have one guy ahead of you on motor and turbo 400 tranny for $150. It runs but rough, I think its bad gas. No carb, no ex mans, no brackets, no pullies,

Thanks Randy

Krex 02-16-2015 03:43 PM

Re: Parting a 72 super with tach, tilt, posi
 
How much for set of blue arm rests to 75023

402GMC 02-16-2015 03:50 PM

Re: Parting a 72 super with tach, tilt, posi
 
if that is a gm fire extinguisher, I would be interested?

snipescastle2 02-16-2015 04:37 PM

Re: Parting a 72 super with tach, tilt, posi
 
Randy,
Anyone ask for the tilt column yet? I'd like dibs if not, or next inline if someone backs out........
Thanks!
Ben:metal:

snipescastle2 02-16-2015 04:38 PM

Re: Parting a 72 super with tach, tilt, posi
 
sorry, i missed that is was sold already...
Ben:metal:

teeitup 02-16-2015 05:52 PM

Re: Parting a 72 super with tach, tilt, posi
 
Krex, they sold with the door panels, sorry

402GMC, I will look and see

Ben, yes sorry its been sold

Thanks Randy

WIDESIDE72 02-16-2015 09:41 PM

Re: Parting a 72 super with tach, tilt, posi
 
Put me in line for the manual throttle and posi/ gears.

teeitup 02-16-2015 09:52 PM

Re: Parting a 72 super with tach, tilt, posi
 
Steve, Posi has been bought by the 2nd guy I had in line for it. Manual Throttle is sold pending condition of it once I get it out
Thanks Randy

teeitup 02-16-2015 10:02 PM

Re: Parting a 72 super with tach, tilt, posi
 
2 Attachment(s)
1972 Jimmy, Eric, the end has a slight bend, can be straightened easily I think

teeitup 02-16-2015 10:03 PM

Re: Parting a 72 super with tach, tilt, posi
 
2 Attachment(s)
1968aj, radio did not come on, it has some light pitting on face. $38 shipped for it knobs, chrome rings, cups and nuts


All times are GMT -4. The time now is 01:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com