Re: 1969 - 70 cab cuts and parts from part out
 

I don't currently have a photo of the driver's side area, but will try to get one in the next couple of days for you. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I think that will be perfect for what I need.

Re: 1969 - 70 cab cuts and parts from part out
 

Would you be OK with $35 plus shipping for that part? I can trim out some of the inner panel if that would help on weight / shipping cost if you want me to. Let me know - Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Here are more photos of the frame from this truck requested by "ne1988"


Attachment 1498794

Attachment 1498795

Attachment 1498796

Attachment 1498797

Attachment 1498798

Re: 1969 - 70 cab cuts and parts from part out
 

I can do that, just let me know what shipping is when you can. Probably won't matter if you cut the inside or not so no need to cut more. Just be fair to me on shipping. Thanks!

Re: 1969 - 70 cab cuts and parts from part out
 

And a few more:

Attachment 1498799

Attachment 1498800

Re: 1969 - 70 cab cuts and parts from part out
 

Will do! Certainly will attempt to get the least expensive rate for shipping I can, but the folks that ship this stuff don't seem to have much compassion for us poor souls trying to put together these cool trucks. :lol: Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay that section looks good as long as there's no spots rusted clean through. If you can cut a 6" wide section of what you showed me & let me know shipping cost for 22630 zip. thanks Jamie

Re: 1969 - 70 cab cuts and parts from part out
 

Here are the photos of the driver's side I promised:

Attachment 1500314

Attachment 1500315

Attachment 1500316

Attachment 1500317

Looks a little rough - let me know what you want to do. Jay
Attachment 1500318

Re: 1969 - 70 cab cuts and parts from part out
 

I need the piece under the passenger side seat here's a pic of what I'm missing if you have how much and how much ship to 71261 thanks

Re: 1969 - 70 cab cuts and parts from part out
 

I will look and see what I have and get back as soon as I can. Will be leaving for Texas first of next week - so will be out of action until first of March so you will know. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I checked today and I'm sorry I don't have a piece like what you are looking for. My floor section is not quite as rotten as the one in the picture, but almost. Sorry I couldn't help you out.
There is an ad I saw a while back on here that was for a reproduction one piece patch panel that would take care of about 90 % of what you need to repair. Sounded like it fit well in application. Might try a search to see if you can come across it.
Jay

Re: 1969 - 70 cab cuts and parts from part out
 

OK thanks for checking

Re: 1969 - 70 cab cuts and parts from part out
 

Any word on shipping? I only ask since I see you are headed out of town.

Re: 1969 - 70 cab cuts and parts from part out
 

Yes I never got a shipping quote either Jay. Let me know. Jamie

Re: 1969 - 70 cab cuts and parts from part out
 

Cab pieces were down in pasture and finally got my tractor to start - bottom line is I got your piece cut out yesterday late. I will get it packaged tomorrow afternoon to send on Monday.
Not sure about shipping, but let's just do $15.00 and I will send it one way or the other. Just PayPal me $50 at 1windyridgebou@gmail.com and we will be good to go. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Sorry Jamie - If you are OK with it send me $25 total for part and shipping. I never got shipping checked, but I will take a chance that it isn't too expensive. If that is alright just PayPal me at 1windyridgeboy@gmail.com
Thanks for your patience! Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Sent you a PM

Re: 1969 - 70 cab cuts and parts from part out
 

Looking for this piece of the cowl. What I really need is the piece of the cab that has the hole for the wiper motor, but will take the whole section.

Ship to 60450

Attachment 1507452

Re: 1969 - 70 cab cuts and parts from part out
 

Interested in hump cutout if that is still available.

Re: 1969 - 70 cab cuts and parts from part out
 

I'm sure I have this piece for you - will double check just to make sure and let you know with price tomorrow. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I still have the hump portion - what is your zip code? I will give you a price when I get that. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
I bought that '72 Cab from you some time ago, anyway's, I need a set of horns for my truck (high and low note) do you happen to have a set from this part out? Let me know,
Ben Smith
:metal:

Re: 1969 - 70 cab cuts and parts from part out
 

Ben - I know I have some horns from other parts trucks, but i'm not sure if any work or which are high and which might be low note horns. Let me do some checking to see what I have. Good to hear from you. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
I think the easiest way to check them is to jumper them on a car battery, I don't know how you would identify a low note from a high note, other than the sound,guess I need to search that, maybe by part number? Thanks!
Let me know.
Ben