The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   Barger's 79 FJ40 (https://67-72chevytrucks.com/vboard/showthread.php?t=733259)

reaper71 12-10-2017 10:53 AM

Re: Barger's 79 FJ40
 
5 Attachment(s)
Well it's next time :lol:

Pic #1. This is the Passenger side "A" pillar that was rotted out.

Pic #2. The Green/brown on the floor was the O.E. color and this was under the factory coating I removed. On the right side the A pillar was cut out.

Pic #3. close up of pillar

Pic #4. New piece made for repair.

Pic #5. The piece being fit before welding (didnt have a shot of it finished)

Till next time

Mark

reaper71 12-10-2017 11:04 AM

Re: Barger's 79 FJ40
 
4 Attachment(s)
Pic #1. Drivers side inner rocker was badly rotted so it gets cut out, the black is rust encapsulator The "A" pillar was also rotted and is fixed along with this.

Pic #2. The new piece I made to replace the bad.

Pic #3. Fitting the new piece, this will end up having a large hole drilled in it for a drain plug.

Pic #4. The final repair.

Till next time
Mark.

reaper71 10-26-2018 08:07 AM

Re: Barger's 79 FJ40
 
5 Attachment(s)
UPDATE:

Sorry Guys for the Long Wait!! on the updates, I will jump around with bodywork and primer fairly quick (so not to bore)

Pic 1 First rd of primer.

Pic 2 After blocking,filler,primer etc

Pic 3 The Green material is Fiberal A fiberglass filler I use first

Pic 4 Rear floor ribs were Very time consuming!!

Pic 5 Final primer.

Mark

RockinKees 10-26-2018 11:17 AM

Re: Barger's 79 FJ40
 
Looks good in primer.
Now on to the painter and then to the building stage?
Or am I going too fast here?

reaper71 10-26-2018 12:58 PM

Re: Barger's 79 FJ40
 
To be honest kees I'll let you guys vote.

The build is already complete and went home, so I have All the ammo I need to show as much as you would like to see.

That being said...would you rather move forward (bypass to paint)and assembly or more primer detail?

Let me know

Mark

Advanced Design 10-26-2018 05:57 PM

Re: Barger's 79 FJ40
 
I am good with whatever you share...and paint then assembly is always exciting. Shiny new stuff!

mongocanfly 10-26-2018 08:13 PM

Re: Barger's 79 FJ40
 
Looks good...I'd also like to see it all...

RockinKees 10-29-2018 05:35 AM

Re: Barger's 79 FJ40
 
Yep I’d like to see all you do.
I’m learning.....
Thanks!

reaper71 10-29-2018 08:07 AM

Re: Barger's 79 FJ40
 
5 Attachment(s)
Here are some shots of the rear doors and the rot that needed my attention.

Pics 1-5 I wont go into detail (don't need to explain with these)

Mark

Advanced Design 10-29-2018 06:08 PM

Re: Barger's 79 FJ40
 
Nice! That edge had to have been difficult to weld. Did you back it with copper?

reaper71 10-29-2018 09:53 PM

Re: Barger's 79 FJ40
 
No I didnt, It welded pretty good actually.
Was time consuming though.

reaper71 10-29-2018 10:01 PM

Re: Barger's 79 FJ40
 
3 Attachment(s)
Pic 1 Bottom of door all metal finished.

Pic 2&3 Bottom of door sill needs repair,so I made a new piece to be welded in.

Mark

reaper71 11-01-2018 09:57 PM

Re: Barger's 79 FJ40
 
5 Attachment(s)
Just a few shots of some parts after bodywork and primer to move things along.

reaper71 11-04-2018 09:21 AM

Re: Barger's 79 FJ40
 
5 Attachment(s)
Update:
Unfortunately while I was transferring pictures from one phone to another I lost 2000 pics! So I wont be able to show all the things I wanted.
Here are the start of paint (none during)That being said I really wanted to show all the shots from under the body as I sprayed the undercoat.
I call the color swamp water/baby poo brown :lol:

Pic 1. Backside of front fender

Pic 2. Topside just after painting.

Pic 3. During wetsanding

Pic 4&5 After polishing.

mongocanfly 11-04-2018 10:07 AM

Re: Barger's 79 FJ40
 
i like the "swamp water do-do" brown....i bet it looks good

reaper71 11-05-2018 08:45 AM

Re: Barger's 79 FJ40
 
Greg, It's one of those colors that grow on you!



Mark

RockinKees 11-05-2018 01:29 PM

Re: Barger's 79 FJ40
 
Awesome work again!
I like the color too, fits the car just right!

reaper71 11-05-2018 06:28 PM

Re: Barger's 79 FJ40
 
Thank You sir!


reaper71 11-05-2018 06:38 PM

Re: Barger's 79 FJ40
 
5 Attachment(s)
Update:

Pic 1. Trans cover

Pic 2. Side panel

Pic 3. Passenger side front & rear doors

Pic 4. Rear door wetsanded

Pic 5. All rubbed and polished.

Mark

Advanced Design 11-05-2018 11:12 PM

Re: Barger's 79 FJ40
 
Looks good Mark!

reaper71 11-06-2018 08:24 AM

Re: Barger's 79 FJ40
 
Thanks Doug

Greenlee 11-06-2018 08:37 AM

Re: Barger's 79 FJ40
 
Nice work! :metal:

reaper71 11-06-2018 07:26 PM

Re: Barger's 79 FJ40
 
Thanks GreenLee

reaper71 11-06-2018 07:33 PM

Re: Barger's 79 FJ40
 
3 Attachment(s)
Pic 1. Here is the way I get panels prepped during wetsanding.
I use fineline tape on all the edges to protect them from burning through.

Pic 2-3 after wetsanding and polish


Mark

RockinKees 11-08-2018 01:30 PM

Re: Barger's 79 FJ40
 
Really nice!
Some orange pinstripes would also be nice ��


All times are GMT -4. The time now is 11:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com