Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
I'm in pieces now replacing floor pan, painting fire wall, engine putting in cam aluminum heads, ect...
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
A1971Blazer,
Sending you a PM. Finally ready to buy one. Hope there is still one available. Terry |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
1 Attachment(s)
I have this one ready to ship
Attachment 1892687 |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
I will take it, this last GMC one that you posted.
Will paypal you. Thanks, Terry |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Paypal sent to you,
Thanks, Terry |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Sent you a PM with my mailing address.
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
When available, I'll take one for np205 tc with the shift pattern only.
Posted via Mobile Device |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
1 Attachment(s)
Quote:
Attachment 1911557 |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
That's the one. PayPal sent for it. Thanks
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Sent pm. Would like to purchase one
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
1 Attachment(s)
Quote:
Attachment 1915535 |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
I will wait for one without the chipping if you don’t mind. I’m in no rush
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Are you still making these for the TC and 4 speed?
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
I have about 25 pieces being anodized right now....should have them back early next week and I'll start engraving them to order.
I also have a few matching 4 speed rings already anodized. |
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Is it possible for you to do just the NP205 shift pattern in bare aluminum with colored letters that show more? Or would I have to get one like in post #60? My carpet is black and I would like to have something in brushed aluminum look if possible.
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Do you still have any available? Look for the 4 speed ring and the transfer case ring for a K/5.
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
also want one PM sent thanks
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Just wanted to see how I could Order a couple of these!
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Quote:
|
Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
Do these work on a 78 k10 high hump sm465 with 205 t- case? Thanks
|
All times are GMT -4. The time now is 07:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com