Re: Should I cut this truck ?
My initial opinion is YES! ABSOLUTELY! BUT.... now that I see the tool box and leaf rear, that changes my mind. Leave it. A shortened truck should be on bags or at least a static drop and on a leaf rear, bags are just not possible. Also, shortening the bedsides gets sketch with the tool box.
LEAVE IT. |
Re: Should I cut this truck ?
1 Attachment(s)
metaloxfab on Instagram is one of the best at shortening bedsides.
Even the ones with tool box doors,... |
Re: Should I cut this truck ?
Quote:
|
Re: Should I cut this truck ?
1 Attachment(s)
Quote:
|
Re: Should I cut this truck ?
Quote:
|
Re: Should I cut this truck ?
You can't shorten it, your SPID would then be incorrect! ;)
Do what you'd like Eric, that's the only real answer - and you can't go wrong. And I do understand the draw - but you already know which side of the fence I fall on :) |
Re: Should I cut this truck ?
I would make a k20 out of it add some cab lights and call it done
|
Re: Should I cut this truck ?
Leave it as it is!
|
Re: Should I cut this truck ?
That’s definitely nice work shortening those bed sides. I don’t think I’d have the balls to cut up an extremely hard to find rust free tool box door like that. Mine is rust free as well and I haven’t seen another one in similar condition over the last several years. That said it is pretty cool that they were able to keep the tool box on it. Doesn’t change my opinion though. I still wouldn’t shorten Chevylands black super.
|
Re: Should I cut this truck ?
I don't see the tool & stowage compartment as a factor. Pull the bed and put on a shortbed, used or new from parts. I'd be fine with leaving it long, but I opened my mind to him shortening once I saw the frame has already been altered with a c-notch. And as far as lowering goes, it's axle flip ready for that. You all have to remember, this man has variety already, and it looks like he's considering expanding to have a ride to fit in with his truck buddies he hangs with. Considering all the elements I can see where this contemplation is coming from. Remember, this is a "like 'em stock" guy. Nothing wrong with expanding that to "like 'em all" or "one of each".
|
Re: Should I cut this truck ?
Cut it.
A cut down longbed is more desirable than a longbed. A purist may disagree. But the market says otherwise. |
Re: Should I cut this truck ?
A short bed catches my eye when I see them. They are more rare because they could not be worked as much and farmers and such wanted trucks to haul things...BUT I can not condone cutting that one down! Frame damage ,as mentioned, no bed or rotted out bed, a bunch of franken parts...make a short bed, but don't take a long bed's life. At least go find a short box and sell the long one.
It's your truck, honestly, do what pleases you! |
Re: Should I cut this truck ?
Its your truck do what you want. I would have zero trouble cutting it if I wanted a short bed and thats what I had to work with. Like you said the stigma of selling a cut down long bed seems to have waned when it comes to someone buying one. Maybe not some of these guys on the board, but generally =)
|
Re: Should I cut this truck ?
Chop it , And by doing that it makes the "REAL" short beds worth more . It's only made it almost 50 years without someone hacking away at it . You may as well drop it on the ground with air bags and raise the bed floor and throw an LS in it at the same time with a few computers to make it run and don't forget to add all the high $ stereo equipment into the newly chopped dash . Don't forget at least 4 cup holders and enough Led lights that it can be seen from the space shuttle and after all that $ dumped into it leave the "patina paint" :lol:
It's your truck do whatever makes you happy with it . :smoke: |
Re: Should I cut this truck ?
I don't always agree with Grumpy - but when I do, it's posts like that! :lol:
|
Re: Should I cut this truck ?
With it's C notch it's already been "hacked" so it was well on it's way to being lowered and what ever else anyway. It was violated! :lol:
|
Re: Should I cut this truck ?
1 Attachment(s)
Quote:
|
Re: Should I cut this truck ?
Nice.
|
Re: Should I cut this truck ?
1 Attachment(s)
Quote:
My dad did too. Always think its a unicorn |
Re: Should I cut this truck ?
1 Attachment(s)
Quote:
|
Re: Should I cut this truck ?
2 Attachment(s)
Quote:
|
Re: Should I cut this truck ?
It seems to me like it would be a great candidate for a new No Limit or Roadster Shop chassis, either long or short! Get it down in the weeds and do it right if the $$$ is not a concern.;)
|
Re: Should I cut this truck ?
Quote:
As far as all that other jabber... You feelin' alright? :lol: |
Re: Should I cut this truck ?
Quote:
|
Re: Should I cut this truck ?
Quote:
|
All times are GMT -4. The time now is 03:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com