![]() |
Re: LS1 into a 73 cheyenne
X2 looks sweet buddy. things are coming together real nice!!
|
Re: LS1 into a 73 cheyenne
OOOOOH, shiney! Lookin good.
|
Re: LS1 into a 73 cheyenne
Looks great! If you don't mind me asking what did that whole setup cost. Just trying to compare with a couple of options that are out there.
If you don't want to post it for some reason please PM me. |
Re: LS1 into a 73 cheyenne
Quote:
the rear exit hoses option was additional $50 so total was $786 NOTE: the PS pulley was extra not part of the A/C kit that one was $120 |
Re: LS1 into a 73 cheyenne
Thanks. I may have to relocate my AC compressor on my swap and just looking at options. There are some options that are a few hundred dollars and use your original comp to whole accessory set ups that run $2500-3000. Thanks for the pics and info!
|
Re: LS1 into a 73 cheyenne
thanks for the info! alien, what other options are out there?? please pm or even post up in my build for others:)
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
All right here are 2. There is another inexpensive one that uses the pancake style compressor but I can't find that link right now. If and when I do I will add it.
THE EXPENSIVE ONES BUT??? A LESS EXOENSIVE SOLUTION BUT USES AN EXPENSIVE SANDEN COMPRESSOR AND HERE IS THE THIRD OPTION |
Re: LS1 into a 73 cheyenne
Quote:
thanks for the links very helpful |
Re: LS1 into a 73 cheyenne
x 2...........thanks
|
Re: LS1 into a 73 cheyenne
Nice!
|
Re: LS1 into a 73 cheyenne
right on man! thank you big time!! i'm just relieved to see other options out there besides the fancy s&p brackets.
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
These trucks look so good in white, I almost wish I woulda painted mine white.
Truck's lookin good man, should be killer when you get that LS1 in there. |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
Quote:
sample pictures |
Re: LS1 into a 73 cheyenne
3 Attachment(s)
more samples
|
Re: LS1 into a 73 cheyenne
That's an awesome color, and the two tone interior will look sweet!
|
Re: LS1 into a 73 cheyenne
nice color combo!!!
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
Update, Im currently waiting on parts. Need the A/C compressor billet cover, spark plugs, air intake, intake filters, and thermostat housing. I will be replacing it with a CSR straight up and a 160' thermostat. Also waiting on my fuel rail covers. Trying to compliment the engine compartment with some blue wherever i can.
|
Re: LS1 into a 73 cheyenne
I love the finned look on those. That is sweet!
|
Re: LS1 into a 73 cheyenne
Check this out..........That is not going to work, Please pick a more "family friendly" avatar.
|
Re: LS1 into a 73 cheyenne
5 Attachment(s)
update
Next up i will be installing power lock actuators (key less entry) and alarm system with remote start. parts: alarm Viper 5901 2- actuators 2- 5 wire relays wire |
Re: LS1 into a 73 cheyenne
I will post more pics after i finish the alarm install.
|
Re: LS1 into a 73 cheyenne
1 Attachment(s)
If you can get your hands on 5 wire relays on the cheap and would like to go that route, this is how to wire it up. the benefit of this method is when one wire is energized the other will remain ground, and vice versa. this means you only need 2 relays instead of 4.
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
:lol:
|
Re: LS1 into a 73 cheyenne
:lol:
|
Re: LS1 into a 73 cheyenne
1 Attachment(s)
My bad hope this 1 works :metal:
|
Re: LS1 into a 73 cheyenne
Mo' Betta'
:lol: |
Re: LS1 into a 73 cheyenne
:lol:Much better...how about "BAD MUTHATRUCKA" :lol:
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
Update- still waiting on parts but i finished up the alarm and door lock actuators. I also installed a hood pin switch that triggers alarm, here are a few pics.
|
Re: LS1 into a 73 cheyenne
Cool progress!
|
Re: LS1 into a 73 cheyenne
Fine looking alarm system!
|
Re: LS1 into a 73 cheyenne
that is cool!
care to elaborate on it? brand? is it vehicle specific? |
Re: LS1 into a 73 cheyenne
Quote:
In remote start mode, if Active Temp Check is selected, Responder LC3 will display Temperature (in either Fahrenheit or Celsius) instead of the time (the default display). Now you can see the actual temperature inside the vehicle, before walking through the weather to get to it! If it isn’t warm enough inside your car yet, use Runtime Reset to extend your runtime. Don’t worry about forgetting about your car – Responder LC3 reminds you 3 minutes before your time runs out, with an audible tone, a vibration, and on the screen. If anything happens to your vehicle, it notifies you right away if you are within range, playing the Revenger siren tones from inside your pocket. If anything has happened to your vehicle during your absence, LC3 spells out what happened Shock Sensor, hood open, door open for example. Control Center – combines the Status LED and Valet Switch with the 2-way Antenna, making the switch easy to locate, and eliminating drilling of any holes in the dash # of Remotes 1 Responder LC3 2-Way and 1 5-button 1-Way Range Up to 1 Mile Security Yes Remote Start Yes Keyless Entry Yes SmartStart Compatible Yes Encryption SuperCode™ Domelight Supervision Yes Stinger DoubleGuard Shock Sensor Yes Neo Revenger 6-Tone Siren Yes Failsafe Starter Kill Yes Anti-Carjacking (VRS) No Guaranteed Protection Plan (GPP) Yes Auxiliary Channels for Optional Functions 4 Remote Control Trunk Pop Yes Auxiliary Channels for Optional Functions 4 Cool thing is that u can do pretty much anything with the auxiliary channels such as roll up roll down windows pop doors open if u have shaved door handles, control youre air bags pretty much anything you want. I highly recommend this alarm system to anyone. |
Re: LS1 into a 73 cheyenne
I like this build. Your truck is going to be wicked :devil: I need to get a good alarm for my 79 GMC. I will be checking into this one. I like the remote start option and all the remote functions. How is your LS build coming? Will be pulling my old engine this weekend getting ready for my 6.0l swap. :smoke:
|
Re: LS1 into a 73 cheyenne
Thanks for the info!!
|
Re: LS1 into a 73 cheyenne
How is your LS build coming? Will be pulling my old engine this weekend getting ready for my 6.0l swap. :smoke:[/QUOTE]
Its slowly coming together still waiting on parts, good luck with you're swap, will stop by you're build thread to check it out. |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
Update finally got some parts in. I got the A/C compressor billet cover, i got my twin horn and air filters, billet straight neck thermostat, Lockar column arm kit, and a tube bender from Imperial bends 3/16, 1/4, 5/16 and 3/8 in. O.D. tubing for my fuel lines and trans lines.
|
All times are GMT -4. The time now is 05:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com