Re: Slot lovers unite!
Quote:
|
Re: Slot lovers unite!
A few days after the last post I know, but here's a place to get these wheels.
www.akhwheels.com I'm not affiliated with these guys, but I have bought a set of 5 for my '71 Bronco. They buy up all sorts of old wheels and restore them. They are so particular that they wont mix and match a set that wasn't polished with the same compound as the reflection won't be the same. |
Re: Slot lovers unite!
Hey Rat Rod
What size are your tires and it looks like you have no drop? I just picked up a set of 15x8 slots with 235 60R15's on the front and they look small on there with a a lot of wheel opening SW |
Re: Slot lovers unite!
|
Re: Slot lovers unite!
i'd like to find some slots for my 91 pickup.do they sell them for that year?
|
Re: Slot lovers unite!
Quote:
There are slot mags for EVERY year. I'm surprised we've never seen a stock Model T with them (now watch, someone HAS a picture of a stock Model T with them and will post it;) |
Re: Slot lovers unite!
Quote:
Kurt, you will do well to choose a size of wheel, and measure lug spacing first. Then search boneyards, ebay, craigslist, pennysaver, etc. Slot-mags are out of of production these days, but they were very common years ago. Pricing for a set in good condition will be less than most new sets of steelies. |
Re: Slot lovers unite!
While CL, ebay and others are a good source for used wheels new slots are still available at for instance Summit Racing. http://www.summitracing.com/parts/ARE-A695765/ and
http://www.newstalgiawheel.com/wheel...ubcat3=1101101 for examples. I think there are others still offering them too. |
Re: Slot lovers unite!
Alright slot lovers, help me out here: I have 4 slots for my C20. Now, I only have 8 lug nuts and I need 24 more. I've checked the local tire\wheel shop and auto parts store, and they don't have lug nuts for me. What type of lug nuts do I need? I'll probably have to order them from somewhere.
|
Re: Slot lovers unite!
2 Attachment(s)
I've got the remakes on my '71 SG
|
Re: Slot lovers unite!
The only way to go... 8 lug 16.5 inch
|
Re: Slot lovers unite!
1 Attachment(s)
Now with photo
|
Re: Slot lovers unite!
pmpski 1: I had really good help from Sheila at Massey Accessory Shop in OK. (405) 239-2010. Best bet is to carefully measure the depth and diameter of holes and be ready to give her as much info about the wheel as you have. Mine are on a 70 c20 suburban. Got something called a 1/2 inch Duplex Mag Part No. 75187B. Probably a Gorilla product. THink they're like 2 1/2 inches long. 1/2 inch thread. 1 inch in the wheel hole and 1 1/2 outside. Don't forget the washers.
|
Re: Slot lovers unite!
1 Attachment(s)
For the old slots om my 69, I bought
7/16 x 3/4 long shaft lug nuts from Auto Zone but they were like a $1.00 a piece |
Re: Slot lovers unite!
A plain ol tire store might not carry lug nuts but a custom wheel n tire shop will and can get you most anything you need to mount your new wheels.
|
Re: Slot lovers unite!
4 Attachment(s)
Ansen Sprint 6 Lugs with original caps...Rare Antique earrings for a beautiful truck. Get them if you can find them...
|
Re: Slot lovers unite!
Hey I remember that one. You're taking good care of it Dr.
|
Re: Slot lovers unite!
Quote:
|
Re: Slot lovers unite!
2 Attachment(s)
This is what the Ansen Sprints looked like when I first saw them. The gentleman said I could have them if I wanted them. I could not believe it. About 2 hours of labor each with a powerball and some new shoes:gmc2:.
|
Re: Slot lovers unite!
Quote:
:gmc2: |
Re: Slot lovers unite!
I'd love to get slots, but the sets I've found aren't the size I want and aren't very friendly to the budget. I'm trying to find some 16x8's or some 16x10's for my truck. I hate 3/4 tons, wheels are hard to find, CHEAP!!!!
|
Re: Slot lovers unite!
Quote:
|
Re: Slot lovers unite!
Test fitment today. I know people are running 33s on C20s, but I wanted to do a test fitment before I commit to buying new tires. There may be 1 good one between the four I have. I only have 1 set of lug nuts so I just did this side.
I still don't know if I'll have enough clearance when the suspension is loaded until I drive it. Looks pretty good. I still have quite a bit of cleanup to do, and then I'll need to paint the hubs or find something to cover those Dana 60 hubs. http://farm5.static.flickr.com/4071/...a9a929ac_m.jpg http://farm3.static.flickr.com/2548/...0c221388_m.jpg http://farm5.static.flickr.com/4020/...a36c3ffe_m.jpg |
Re: Slot lovers unite!
3 Attachment(s)
Old Skool is the rule.....
I found (2) 6 lug 15 x 8-1/2 Indy Aluminum Slots and (2) 15 x 7 Western Aluminum slots via internet searches. Rear tires are 33x12.5x15, fronts are 235-75-R15. |
Re: Slot lovers unite!
3 Attachment(s)
Well here she is....took alot longer to get em on the truck than I expected.
I love these wheels. Makes the truck look just the way I wanted. Attachment 529485 Attachment 529486 Attachment 529487 Now, unfortunately, with the Doctor bills ever mounting, a 1 year old baby girl, and some changes at work....looks like I'll be saying goodbye to it. Sometimes it's difficult not to get a little "hacked off" at the way things turn out. But I know where a couple more trucks are...so when things get settled down again, I'll start over. |
Re: Slot lovers unite!
Well that's a shame. No way to hang on to it?
|
Re: Slot lovers unite!
I just got this blazer yesterday for parts, mainly for the slots. I traded a pair of fenders for the whole rig.
http://i108.photobucket.com/albums/n...r/IMG_5491.jpg |
Re: Slot lovers unite!
dprs anyone know who still sells the 8x6.5 wheel pattern of these at all.
|
Re: Slot lovers unite!
Quote:
It's a stock, rust bucket, running, project, and I'm trying to get some ideas on how I want the finish product to be... I like the stance on this one, the best... What size wheels / tires are you running? What's the specs on your suspension? I'd like to check out a build thread, if you have one, if that'll answer my questions, easier. Thank you in advance. |
Re: Slot lovers unite!
Ttt
|
Re: Slot lovers unite!
is ford/chevy five lug pattern the same by any chance?
I gotta friend with slots he may sell em there on a 78ish for truck |
Re: Slot lovers unite!
Quote:
Chevy 5 on 5 Ford 5 on 5.5 |
Re: Slot lovers unite!
Quote:
tires-BFG's 255/60/15 all the way around. rims-15x8's front and 15x10's back. stance-3''-5'' drop coils. http://i712.photobucket.com/albums/w...2/dcp_4573.jpg Hope this helps. |
Re: Slot lovers unite!
Dangit!
Id like a set but guess not this time around. |
Re: Slot lovers unite!
1 Attachment(s)
Well as usual I am tail end charlie on these conversations but here is my daughters first vehicle project that I have been working on since last March.
It is actually finnished but this was when we first put her slots on it. I bought the wheels from someone on this site as well as the truck and alot of misc. parts to put it together. Pretty cool! BTW, some great looking rides here! I am an original freak but man I do like slots on our vintage trucks. |
Re: Slot lovers unite!
Front rim as bought, and rear rim after polishing for 20 minutes, Both rims are 15 x 9.5. Picked 4 of these up for $100 plus shipping.
http://i242.photobucket.com/albums/f...8/IMGP1267.jpg |
Re: Slot lovers unite!
2 Attachment(s)
ive got slots aswell, ansen sprints i believe
|
Re: Slot lovers unite!
Quote:
:lol: |
Re: Slot lovers unite!
For those interested in new slots, I just saw an advertisement in Classic Truck magazine that Stockton Wheel now produces the old slot wheels in various sizes and widths and even 6 lug pattern.
|
Re: Slot lovers unite!
Thanks for the info! :metal:
|
All times are GMT -4. The time now is 12:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com