Re: pls post pixs of 67-72 Panels
 

I hope crewcab67 doesn't mind but I thought it would be good to include his dad's panel pics here....these were posted asking WIW.
Attachment 562406

Attachment 562407

Attachment 562408

here is his description of the truck, "it has a 67 front end all the door handels and side lights have been shaved, all the rust has been cut out and welded back with pach panels. It has PS, PDB, 5 lug, tack, tilt, 3" lowerd springs all the way around, C-noched over the rear end, all new tinted glass, new door rubbers, 400 SB runs good, TH350. It has all new interior in it."

Re: pls post pixs of 67-72 Panels
 

I've been meaning to get an updated pic with the new rims for a while now. I got the rims from board member "MYGMCANDME" and had them blasted, painted and bought new centre caps. This is the pic I should of posted for the current TOTM contest.
Attachment 614576
Attachment 614581
Attachment 614583

Re: pls post pixs of 67-72 Panels
 

Heres my 69

Re: pls post pixs of 67-72 Panels
 

I love that TX patina, nice panel.....

Re: pls post pixs of 67-72 Panels
 

Here are a few recent pics of mine

http://hphotos-snc3.fbcdn.net/hs503...._5510264_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._4737225_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-...2_623360_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3083069_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7354210_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._5566121_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-...1_322576_n.jpg

Re: pls post pixs of 67-72 Panels
 

I haven't checked in with my Panel Brothers lately. I've been pretty busy all summer with work and haven't had a lot of time for my Panel, except saving money for a drive train. And now I have a shiny new Bowtie Overdrive's 200R and a greasy old 292 and fresh motivation. I get more done in the winter, anyway. I'll be getting that motor tore down and off to the machine shop in the next couple months and hopefully have a clear direction for it's re-build. I really, really want to supercharge it, so I will build it with that in mind. I just need to educate myself on what it's gonna take. I want reliability above all, with power and a heavy dose of cool.

Re: pls post pixs of 67-72 Panels
 

Heres some pics of the 69 i picked up the other day. I got her for $550. Had to trailer her up here on a u-haul. Its got a 350 out of a 71 C-10 and a 3OTT. It runs and drives but doesnt stop. Its also got a bunch of cancer, but cancers fixable. :lol: Heres some pics

http://i258.photobucket.com/albums/h...4101309-00.jpg
http://i258.photobucket.com/albums/h...3101447-00.jpg
http://i258.photobucket.com/albums/h...3101523-01.jpg
http://i258.photobucket.com/albums/h...3101524-01.jpg
http://i258.photobucket.com/albums/h...3101524-00.jpg
http://i258.photobucket.com/albums/h...5102048-00.jpg
http://i258.photobucket.com/albums/h...hmentaspx4.jpg

Re: pls post pixs of 67-72 Panels
 

hey 79wagon. Welcome to the panel brotherhood and welcome to the board!
I love the potential in your "new" panel....almost looks like mine did a few years back. Have fun send in lots of progress pics.
Rob.

Re: pls post pixs of 67-72 Panels
 

hey Pritch. You have some cool plans there, can't wait to hear about the progress. I'm getting near to winter storage time here and I have a small list of things to accomplish over the winter. Just a lot of small stuff really--like install the new dash pieces I have, fix the leak under the dash that drips on my foot when it rains, finally get the e-brake hooked up and maybe a tie-rod and ball joint replacement.

Anyway it was good to hear your plans-maybe the other guys will pop in for an update. There are a few panels on here I've been wondering about lately.

cheers!

Re: pls post pixs of 67-72 Panels
 

Thanks, Robb. I need/want to have my drivetrain complete by spring. That's the big plan, but like you, I have lots of little details to deal with also. I guess I need to thin down the motor collection some. Now that I have the one I want, I can get rid of some of the others. I have a 2nd gen 350 out of a junked-out boat and a 327 out of a junked-out 'Burb. My friends kid wants the 327 for his '67 Chevelle project, but I'm gonna make him trade me something for it. Maybe a fender or something. I also have a complete, running 230, 2 complete and running 250's, everything but the block for another 250 and a dis-assmbled 292 of questionable worthy-ness.

79Wagon, good to see another panel being saved! Welcome to the club!:metal:

Re: pls post pixs of 67-72 Panels
 

jgb7038's panel -

Re: pls post pixs of 67-72 Panels
 

Just a few pics I have...

Re: pls post pixs of 67-72 Panels
 

Re: pls post pixs of 67-72 Panels
 

More...

Re: pls post pixs of 67-72 Panels
 

...and more.

Re: pls post pixs of 67-72 Panels
 

When I see them I save the pics, damn these are RARE! Pre '67 all day long, '67-'72 nope! Anyway... I have some pics of 4wd versions somewhere, I'll see if I can find them. The 3rd and 4th pic are the same vehicle by the way.

Re: pls post pixs of 67-72 Panels
 

SWEET! I want one!!!

How big is the door opening??
Wonder if my Harley would fit????

Re: pls post pixs of 67-72 Panels
 

dont think a harley will fit unless it has drag bars, but even then it might not. i had a 2007 yfz 450 quad and it would not fit in the back of my burb

Re: pls post pixs of 67-72 Panels
 

Man some of you fellows make me fell like Im starting with real gem.Unfortunately there is lots of shoty body work that been done that will have to be cut out and replaced before I can start the fun stuff like custom interior and slight hop up of the Big block. Ive included the only pic I have at present of the truck its 1969 1/2 ton that has only had two previuos owners and granfather was first one and he bought it back from the guy he sold it to. So I guess Im third owner.Anyway its back in the family and ready for seriuos makeover.

Re: pls post pixs of 67-72 Panels
 

Hey! I purchased the 67 panel pictured on the trailor! It is now sitting on a 72 4wd suburban frame with new front clip,new crate engine with new built 700r4, radiator,newly covered bucket seats , new marine plywood floor,new bumpers with bumperettes,tow hooks and new interior so far. From the front fenders back it still has the same body, but a work in progress!

John

Re: pls post pixs of 67-72 Panels
 

Ive been wondering about my harley fitting into panel also. I'll have to measure the Road King Custom,I know the springer will fit its been lowered to minimum height and has dragbars .Well it will fit if its not to ong the 42 degree rake and 3 inche extended rear swing arm might be problem.
If the road king would fit its be great for bike rally camp out of panel and not have to tow a trailer. I normally ride no matter where they are but with wife shes not up for 1800 miles riding in the ***** seat

Re: pls post pixs of 67-72 Panels
 

hey guy's,new member here.let's see if i can post a pic of my panel

Re: pls post pixs of 67-72 Panels
 

Beautiful 68. I have seen it on the internet for awhile. Welcome to the board from Maryland!! :)

John

Re: pls post pixs of 67-72 Panels
 

Nice 68! Only a few miles from me,I thought i had seen all the panels on L.I.:lol:

Re: pls post pixs of 67-72 Panels
 

Thanks guys,yea it's been for sale on/off for awhile now,but i know i'll regret selling her.Had a 67'panel in 93' but she meet up with a big oak tree from the black ice that formed,hit it dead center just rear of pass door.Now i'm keeping this one,with absolutely zero rust anywhere,i'll never find another.Hey scotto0609,know of any 69-72 blazers for sale on the island,or parts junkies?

Re: pls post pixs of 67-72 Panels
 

Nice panel.Actually its same color mine was originaly. I'm thinking about going to same color when I get finished with restoration and updates.
Awsome piece for knowledge sake and if you don't mind what are you asking for it?

Re: pls post pixs of 67-72 Panels
 

The only yard I know is d&d out in bellport but those trucks are few and $. Wouldnt have happened to see my old 67 panel around{4x4,big block,4 speed,lt green}? Wish I never sold it. For a while there !5 -20 years ago I would have told you to come on down,I used to part these things as a side job!

Re: pls post pixs of 67-72 Panels
 

I stop in at d+d every now&then.I never saw that panel,was it factory 4x4?sounds like a cool ride.I thought about converting mine,but the ride is nice now

Re: pls post pixs of 67-72 Panels
 

No it was a 6 cylinder 3ott that I put on a 69 sub 4x4 frame. It was rotted,oops i mean it had patina,in all the right places!:lol: If I ever find another one for the right price I will do it again as my beach buggy!

Re: pls post pixs of 67-72 Panels
 

Now that i think about it,I remember a 67' 4x4 in deer park, babylon area.It had a side window cut into it,I think this was your truck,also saw the 69 burb that got used for the frame at a shop on station rd&woodside,think it was white?

Re: pls post pixs of 67-72 Panels
 

Thats me,I bought the truck from the guy and he switched it for me.He also had a really solid blue 2wd 69.I wanted the 69 but he wasnt letting it go at the time

Re: pls post pixs of 67-72 Panels
 

Here is my 67. Alway's a work in progress.

Re: pls post pixs of 67-72 Panels
 

It looks like alot of hard work already done on your 67. Anything done inside? :)

John

Re: pls post pixs of 67-72 Panels
 

Some work inside, the back is still pretty much bare....

Re: pls post pixs of 67-72 Panels
 

Any pictures by chance?

Re: pls post pixs of 67-72 Panels
 

it came from fontana cali if i remember right as well

Re: pls post pixs of 67-72 Panels
 

Yes, its the one from Fontana. I had taken pictures of the complete build to this point. My daughter borrowed the camera from my wife and deleted all the pictures. :o I'll be sure to post some pictures this spring when some of this snow melts.

John

Re: pls post pixs of 67-72 Panels
 

Maybe these will do for now. I snagged these last weekend at our little Maryland group spring oyster roast at Duallyjams' backyard.

http://i190.photobucket.com/albums/z...2/IMG_4408.jpg
http://i190.photobucket.com/albums/z...2/IMG_4413.jpg
http://i190.photobucket.com/albums/z...2/IMG_4412.jpg
http://i190.photobucket.com/albums/z...2/IMG_4406.jpg
http://i190.photobucket.com/albums/z...2/IMG_4405.jpg

Re: pls post pixs of 67-72 Panels
 

I absolutly love that panel special k,I really miss mine! Maybe one day!

Re: pls post pixs of 67-72 Panels
 

His really is a true 67-72 K/10 Panel...a '67 body on a '72 suburban frame.