Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
R/ |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
5 Attachment(s)
Quote:
|
Re: The LS1 swap headers are done!!!!
Funny thing.............I had a local speedshop call Doug Throleys with this part number and they say they don't make them??????
|
Re: The LS1 swap headers are done!!!!
4 Attachment(s)
Drivers side.....
|
Re: The LS1 swap headers are done!!!!
Quote:
Deuce, just ask for part # thy324y. Tell them to add a "c" if you want ceramic coating. The catalog they have is probably from last year. Jamie |
Re: The LS1 swap headers are done!!!!
Jamie,
Do you have a price for the non-ceramic headers? |
Re: The LS1 swap headers are done!!!!
any chance we can get these in stainless?
|
Re: The LS1 swap headers are done!!!!
Would these clear the bellhousing of a th350 behind a 5.3 or 6.0?
|
Re: The LS1 swap headers are done!!!!
Quote:
Quote:
These are 14ga mild steel. |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Just recieved a set last week for a buddy's 69 with an LQ-9- 6.0 / 4 L65 combo and they fit perfect!! The coating looks better than chrome!! Too bad all aftermarket parts dont fit this good! :metal:
|
Re: The LS1 swap headers are done!!!!
Quote:
Thanks for the kind words. Glad you like them. Jamie |
Re: The LS1 swap headers are done!!!!
does anybody know if these headers would fit 1950 chevy truck ls5.3 with mustang 2 suspension?
|
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Does anyone know if these headers will fit my 65 1/2 ton pu and if so what mounts would be required. Contemplating this swap on my truck. Thanks in advance and very nice looking product.
Tommy |
Re: The LS1 swap headers are done!!!!
jaime...my truck is back on the road...
'81 c10 swb with an LS5.3 and th350....motor mounts are standard 6 hole plates that move everything 1" forward. Do you still need a 73-87 tester?? I'm in SoCal and could be your victim. dsm25psi@aol.com thanks |
Re: The LS1 swap headers are done!!!!
Give me a call in about three weeks. 951-733-1052
|
Re: The LS1 swap headers are done!!!!
I might have missed it, but will these work on a 4x4? I can't quite tell from the pics if they will clear the shackles. Also, are they available without the coating yet?
|
Re: The LS1 swap headers are done!!!!
Just a quick note for anyone else looking for a dipstick. There's a typo in the first post in the thread. The correct part number for the Lokar dipstick is ED-5008 and not ED-5800 as listed. Hope this helps someone! :)
|
Re: The LS1 swap headers are done!!!!
Ordering update: Just got off the phone with Nick @ Thorley and he's no longer offering the discounted price mentioned in the first post, but one of their distributors (BJ's Off-Road) is. Just finished placing my order. Here's the contact info:
Phone: 253-265-6678, ask for Brent (no, not me!) URL: bjsoffroad.com (these aren't on their site, however) My price was $525 plus $30 shipping to Minnesota. Nick @ Thorley sent an IM to Brent @ BJ's and Brent called me back within a couple minutes of my hanging up with Nick. Friendly, painless transaction. :) It should go without saying, but just in case ... I have no connection whatsoever with this business except having placed an order with them. Posting this info to help save someone a phone call. Brent |
Re: The LS1 swap headers are done!!!!
Hey, do your tri-y headers for the original style small block in a C10 hang below the frame?
|
Re: The LS1 swap headers are done!!!!
Still wondering if these will work in a 4x4? Anybody? Thanks.
|
Re: The LS1 swap headers are done!!!!
These look pretty quality. Anyone think they'd fit a 5.7 with a 4l80e mounted to a Porterbuilt Dropmember. This is all stuffed in a 67 btw. Thanks in advance.
|
Re: The LS1 swap headers are done!!!!
are your 73-87 ls1 headers carb approved? making a swap in a few months and was curious
|
Re: The LS1 swap headers are done!!!!
if somoene will answer their PM I will become a sponsor here and offer these headers at a GOOD price!
|
Re: The LS1 swap headers are done!!!!
5 Attachment(s)
this may help with anyone using doug thorley headers with 383.
Attachment 483125 Attachment 483126 Attachment 483127 Attachment 483128 Attachment 483129 |
Re: The LS1 swap headers are done!!!!
I am now a site vendor!!
These headers I will ship out to you for $535. I will get them added to the website soon, but until then please PM me and I will get payment information set up for you! THANKS!! |
Re: The LS1 swap headers are done!!!!
Quote:
Anyone care to chime in. |
Re: The LS1 swap headers are done!!!!
What is up with the right side collector? is it angled down?
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
3 Attachment(s)
Here are my pics. This is a '69 frame with a 5.3 / 4lL60.
Will the exhaust man be able to make a slight bent in my exhaust pipe (just out of the header) to make it up and over the OEM cross member?? Also, I need more information on the plug wires I need to use. I would like to find some that are already cut to the proper length. Any ideas?? If you look close, I had already cut my frame before I bought these. Very pleased with these headers!!! |
Re: The LS1 swap headers are done!!!!
Quote:
there are MSD or Taylor wires that can be used. MSD comes in Red or Black; Taylors are red, black, and blue. $75 shipped for MSDs and $65 for Taylors. *today I have also tried to get my plugs and wires installed and realized the stockers were not going to work so I will be using the Taylors. |
Re: The LS1 swap headers are done!!!!
Quick heads up on the wires. Spend the extra for the MSD wires. I've used both the MSD and Taylor wires. The Taylor were crap. The first time I had to remove them, 4 of the 8 came apart and were trash. And they were only on the truck less than 1k miles. I've had the MSD's on and of multiple times on many different vehicles and never had a problem. Just my .02
|
Re: The LS1 swap headers are done!!!!
Quote:
Thanks for the input!!! I was almost sold on the Taylor wires. |
Re: The LS1 swap headers are done!!!!
Quote:
here are some pix from today. blue wires are stock GM unit from the motor I got and the red ones are the F-body ones that I will be replacing with black ones. http://www.herronperformance.com/ass...tock_wires.jpg http://www.herronperformance.com/ass.../MSD_Wires.jpg |
Re: The LS1 swap headers are done!!!!
on the msd wires...
pm me and I can give you info on best price anywhere. |
Re: The LS1 swap headers are done!!!!
Makes me want another project, GREAT work!
|
All times are GMT -4. The time now is 10:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com