Re: Power Brake Booster Adapter Bracket
Does anyone know what Booster Gonnuts used? That setup looks pretty sweet and i would like it on my 1966.
Also I need a PM for the bracket please, might as well make it black powder coated too! |
Re: Power Brake Booster Adapter Bracket
That booster is just one of the universal aftermarket boosters. You'll have to elongate the holes in my booster bracket slightly to bolt one of those to it.
I'll send you a PM with ordering info. Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
|
Re: Power Brake Booster Adapter Bracket
Do you happen to recall what booster and where you purchased it from? I want one the will bolt right up.
Also, Great item Captain Fab it looks very nice. |
Re: Power Brake Booster Adapter Bracket
2 Attachment(s)
Thanks i got my bracket on Monday!! Mounted it today had to make the holes a little bit bigger....i think that was because i was using a universal brake booster.....looks great!!!! Thanks again!!!!
|
Re: Power Brake Booster Adapter Bracket
That looks good :thumbs:
That is correct in regards to elongating the holes for the booster. My booster brackets are designed to use factory boosters with the 3-3/8" x 3-1/2" stud pattern, not the aftermarket boosters with the 3-1/2" x 3-1/2" stud pattern. So the amount to elongate the holes is only 1/16" each. Would you mind if I copied your pics and posted them in the '63-'66 booster bracket for sale thread? Quote:
|
Re: Power Brake Booster Adapter Bracket
Yes you can!! thanks again!!! :chevy:
|
Re: Power Brake Booster Adapter Bracket
Thanks :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
2 Attachment(s)
if you can...please look at my set up on my brakes. it is 1968 with front disc brake conversion on it when I bought truck so I am in the dark about specifics. I am wondering if the bracket that you offer would work for me and what would I gain if used it other than giving me a more cleaner more spacious look under hood. thank a lot. your product looks great.
|
Re: Power Brake Booster Adapter Bracket
if I used your bracket what would I have to change other than the push rod length? and whats the proper measuring technuiq for this?
|
Re: Power Brake Booster Adapter Bracket
Since you already have power brakes, all you will gain is looks and room. When lengthening the booster pushrod, it just needs to be done in such a way so that it is long enough, and still has adjustment available. There are a few different ways to go about it.
Here are a couple ways: http://www.67-72chevytrucks.com/vboa...&postcount=324 http://www.67-72chevytrucks.com/vboa...d.php?t=564518 |
Re: Power Brake Booster Adapter Bracket
Pm sent.
|
Re: Power Brake Booster Adapter Bracket
I replied to your PM :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
PM sent :chevy:
|
Re: Power Brake Booster Adapter Bracket
Reply sent :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
PayPal sent. ! Thx
|
Re: Power Brake Booster Adapter Bracket
Your booster bracket shipped out today Chris. You should receive it by Wednesday.
Quote:
|
Re: Power Brake Booster Adapter Bracket
do you offer any rear disc brake conversion bracket kits? or any tips on a conversion using found parts from typical salvage yard vehicles?
|
Re: Power Brake Booster Adapter Bracket
Yes I have 5 rear disc brake bracket sets. There are links to the for sale threads for the 3 five lug bracket sets in my signature line. If you need 6 lug, let me know and I'll send you the links to those.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Sent ya a pm
|
Re: Power Brake Booster Adapter Bracket
PM replied to :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
Will this put you back up front so I can keep tabs on you and your nice fab work!!
|
Re: Power Brake Booster Adapter Bracket
It will for just a short time with as busy as this classified section is. You can always find this thread again by either subscribing to it, or simply follow the link to it from my signature line.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Received my bracket in the mail yesterday! Looks great! Thanks again! Now I've just gotta find time to put it on.
|
Re: Power Brake Booster Adapter Bracket
PM sent
|
Re: Power Brake Booster Adapter Bracket
PM replied to :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
|
Re: Power Brake Booster Adapter Bracket
Hey, just getting started on a build of a '70 Long bed stepside. What exactly is the advantage of using this setup?
|
Re: Power Brake Booster Adapter Bracket
The purpose of my '67-'72 brake booster bracket is to get the booster and master cylinder closer to the firewall instead of hanging way out there. You do not have to use a newer booster if you don't want to. The '67-'70 is one of the compatable boosters. But if you are going to upgrade to front disc brakes, that would not be the one that I would choose. If you do go with a newer brake booster, you can find one in just about any wrecking yard or parts store.
Quote:
|
Re: Power Brake Booster Adapter Bracket
2 Attachment(s)
I have 2 of these '67-'72 booster brackets that are zinc plated. The price is the same as the powder coated version which is $61.50 plus $11.65 for shipping.
|
Re: Power Brake Booster Adapter Bracket
One zinc plated booster bracket left :)
|
Re: Power Brake Booster Adapter Bracket
Does this set up work for disk/disk? I want to use the same power booster as all of you are talking about. I am running a ls5.3. w/ a 4l60e.
|
Re: Power Brake Booster Adapter Bracket
This booster bracket will work for all types of braking systems. You will just need to use a master cylinder and prop valve for a disc/disc system with the booster that you select. Some guys recommend a dual diaphram for a disc/disc system.
|
Re: Power Brake Booster Adapter Bracket
Getting ready to install a setup on my 70 LB stepside. I'll post pics as I get it done and let everyone know how the conversion goes. Got my brackets from Captainfab for the Impala rear disc setup and the booter bracket as well. It's 4 wheel manual drum now. Got a pair of 2 1/2" drop spindles that'll be here tomorrow. Gonna use a Wilwood adjustable proportioning valve.
|
Re: Power Brake Booster Adapter Bracket
Sending PM for a pair of brackets
|
Re: Power Brake Booster Adapter Bracket
I still have one zinc plated booster bracket.
|
Re: Power Brake Booster Adapter Bracket
Subscribed
What do you have available? |
Re: Power Brake Booster Adapter Bracket
I still have the zinc plated booster bracket as well as several in bare steel. I am currently out of the satin black powder coated booster brackets but I will be getting more done.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
What would the cost for bare steel shipped to 77095? Thanks |
Re: Power Brake Booster Adapter Bracket
The total price for the zinc plated booster bracket is the same as in post #110 above.........$73.15. The price for the bare steel booster bracket is the same as in post #1 of this thread.......$66.65.
Quote:
|
All times are GMT -4. The time now is 04:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com