Re: 72 Cheyenne Super First Project
4 Attachment(s)
Quote:
Here is the update for the day. I almost finished mounting the bags. I have to go to the parts house tomorrow and get straight valves, rather then the 90 degree ones, so I can run the line straight through the hole in the bottom of the frame and then they are complete. I also took a stab at some of the remaining patch work on the cab. I have to say, it is very frustrating welding such thin material but I eventually got it. I am taking the last extra pieces up to the powder coater tomorrow and that is probably going to be it before I leave for a week. Once I get back I will be able to bolt on the upper and lower a arms and the bed should be done at the body shop and I can give them the cab!! She is moving along slowly but surely:metal: |
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Got a little work done today on the truck. Finished mounting the bags, got the brake lines sorted out and made all of the lines (first time). I also threw a gear in the rear end to see how it would clear the cross member. Worked out pretty sweet, the housing slopes straight down right where it would hit the crossmember. I just need to flare the ends of the brake lines and put all of my fittings in. I am going in tomorrow to work on making the track bar mount and that will be it before I head out for a week to go to CA.
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
A few more pictures
|
Re: 72 Cheyenne Super First Project
That looks nice Graham....what gear ya gonna run??...Also, probably missed it earlier, but what drivetrain too??:D.....you probably know this, but I assume you'll protect your air lines so they don't rub the frame....
|
Re: 72 Cheyenne Super First Project
Nice!!!!!!!!!!!!!! :metal: :cool:
|
Re: 72 Cheyenne Super First Project
Quote:
Quote:
|
Re: 72 Cheyenne Super First Project
find some rubber hose that has a large enough inner diameter to fit around the outer diameter of the air line, cut it like 3-4" long, cut it length-wise to split it, then wrap it around the line where it may rub...maybe use ties to secure it in place
|
Re: 72 Cheyenne Super First Project
Okay sweet, thanks for the tip. I'll be sure to do that:metal:
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Back from California. No progress on the truck but I have some pictures of some of my stuff stashed out there, swb wood bed, grandpas 71 lwb, and my dad's 69 camaro drag car.
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Quote:
|
Re: 72 Cheyenne Super First Project
Welcome back Graham...things looking good over there in Cali....now get back to work on your truck before you have to go to college:D
Thanks for the bed pictures....now stop teasing:D |
Re: 72 Cheyenne Super First Project
There are some nice rides & projects you got,gald your back,so back to work on the truck.Keep the pictures coming & Keep on Truckin' :metal: :cool:
|
Re: 72 Cheyenne Super First Project
Quote:
Quote:
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Here is the update as of today. My frame got moved into the garage and all of the body is at the body shop getting worked on. I got the rear end that I am gonna run, minus the gear, and I got my disk brakes :))))))) (alcon racing brakes off of a nationwide car!!) I am waiting on some parts to come in the mail so I can put the front suspension together and then the motor will be going in. Here are some pictures of the brakes, I'm kinda excited about them:metal:
|
Re: 72 Cheyenne Super First Project
Quote:
|
Re: 72 Cheyenne Super First Project
Hey guys, I haven't update the forum for a while so I thought I would fill in everyone on the progress of the build. I moved off to school on August 18th and I have only been home once since. My truck has sadly been neglected and the last time I was home she was sitting in the garage covered in Christmas boxes and all of the other crap that gets thrown in the garage. The last time I was home, I went to the body shop and all of the body work was done and the truck was in primer. I paid them and depleted my savings account. I just talked to my dad on the phone today and he said that things are slow at the body shop so he is gonna have them paint the bottom of the bed, the inside, bottom and back of the cab, the firewall, and the front of the bed so we can bolt those onto the frame and not have to mess with that anymore. I am going home Friday so I can take some pictures of the progress. I should have the cab and bed on the frame Saturday night so keep posted for pictures.
|
Re: 72 Cheyenne Super First Project
What's up Graham!!!...Hope school is going well for ya buddy!!!...Look forward to those pictures:D
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Got the truck from the body shop yesterday. Some spots turned out really nice and some not so much but for the price that they charged me I can't really complain. I have been trying to get as much little stuff done to her as I can seeing that I am leaving to go back to school this evening. Here are some pics of my progress thus far.
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
A few more
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
Here are some pictures of my progress. I have been home on break from school and I have been out in the garage every single night till at least midnight working on this girl. I am getting pretty excited but I still have a lot of work to go. As far as the interior goes I need to get my seat covered and installed, the steering column figured out, glove box door and ash tray painted, and the dash installed. That's about it for the interior. The only thing I have done to the exterior is run the tail light wiring harness and clean up the master cylinder and brake booster. I have about a billion pictures so here you go picture junkies :sexy:
|
Re: 72 Cheyenne Super First Project
4 Attachment(s)
more
|
Re: 72 Cheyenne Super First Project
2 Attachment(s)
old vs. new
|
Re: 72 Cheyenne Super First Project
2 Attachment(s)
Final two. Man I love how clean this thing looks underneath
|
Re: 72 Cheyenne Super First Project
Nice progress!!! It's looking great!
|
Re: 72 Cheyenne Super First Project
Looking good Graham!!!...Nice and clean!!!:metal:
|
Re: 72 Cheyenne Super First Project
Hey Grahamm, just read thru your build. very nice work bud! Always nice to see the younger generation take interest in the classics. keep up the good work:chevy:
|
Re: 72 Cheyenne Super First Project
Thanks guys. I'm back up at school now and I won't be home until Thanksgiving so I won't be able to work on her for a little over a month. Its killing me not being able to work on it every day. There's so much to do, haha. But hopefully when I'm home for turkey day I can throw the motor and trans in and get some more done. I think I am gonna have to toss out the rear end idea because the one I have in is way shorter then a stock rear end and that is gonna create some issues when it comes to wheels and tires. And if I toss that rear end then I am gonna have to toss the truck arms and my bags so I'm not sure what is gonna happen there. Hopefully I can keep everything and figure out a way to make it work without tearing to much up. Again thanks for the kind words everyone. Back to college life for me, I'll keep everyone updated when I make some progress.
|
Re: 72 Cheyenne Super First Project
I'm headed home on Friday for the weekend so I will be able to get some work done on the truck. My dad will be home this weekend so we are gonna try to get a cherry picker and throw the motor and trans in. Saturday I will be at the Goodguys show at the speedway all day drooling over other rides and selling parts with my dad, haha. If anyone else is going to be there let me know, I'd love to meet some board members!!
I had a quick question about my steering column. My column is originally out of a van so we had to shorten the shaft but the neutral safety switch hits the brake pedal housing forcing the steering wheel to be super close to the dash. Is there any way around this? I know that people have put van columns in these trucks before. Some pointers would be greatly appreciated. |
Re: 72 Cheyenne Super First Project
hey Graham...I'll be at GG Saturday as well....where's is your Dad selling parts at??....Let me do a search for van tilts...seems that you'll have to relocate the NSS
|
Re: 72 Cheyenne Super First Project
Here's one I found...
http://67-72chevytrucks.com/vboard/s...d.php?t=147927 (this one looks like the best to follow for the NSS mod!!!:metal:) |
Re: 72 Cheyenne Super First Project
Lookin Good!
|
Re: 72 Cheyenne Super First Project
Quote:
And not sure about where we will be selling parts. Somewhere in the infield swap meet area. Are you bringing any trucks? If so you'll probably see me at your spot drooling and dreaming, haha!! Hope to see you there |
Re: 72 Cheyenne Super First Project
Quote:
|
Re: 72 Cheyenne Super First Project
Quote:
|
Re: 72 Cheyenne Super First Project
Quote:
|
Re: 72 Cheyenne Super First Project
Quote:
Quote:
|
Re: 72 Cheyenne Super First Project
Quote:
Plans for tomorrow night: Go to the parts house and get a heater core, install the heater box, do that mod to the steering column and install the column, fix my brake pedal, and get the motor and trans bolted together. I need a cherry picker, which I don't have, to install the motor and trans so I am gonna have to wait till my dad's friend is home so I can borrow his. Which means another weekend:waah: |
Re: 72 Cheyenne Super First Project
2 Attachment(s)
You can see the difference in the housings. Haha, kinda sad it took me this long to notice that
|
Re: 72 Cheyenne Super First Project
Nice clean truck, great work so far!
Good build thread too. I look forwardsto seeing it in April at the cruise downtown!! Wish I was gonna be in town for GG this weekend. X2 on the Detroit Speed open house, that is always a good time! Good luck and keep up the good work! Jeremy Posted via Mobile Device |
Re: 72 Cheyenne Super First Project
Quote:
|
All times are GMT -4. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com