Re: 2010 Camaro Wheels on Lowered C10
 

when I say my truck is low for static drop truck its low. its about 5.5-6 in front and 7-8 in back. I rub even with the over wheels/tires. So as long as youre not extremely low, I would run those sizes.

Re: 2010 Camaro Wheels on Lowered C10
 

Ok, gotcha. Mine is about 2-3 in front and 4-5 in rear. Thanks for your help. I will post some pics on here when I get it all done.

Re: 2010 Camaro Wheels on Lowered C10
 

School boy, did your adapters appear to be hub centric? Trying to decide if I should even worry about it and just run these. They've got a set of four on ebay for $109 shipped here:
http://www.ebay.com/itm/4-Wheel-Adap...5f01c0&vxp=mtr

The set that of 2" adapters that Im using on my '92 Camaro with C6 wheels have held up well but dont remember if they are hub centric. Guess I can go pull a wheel.

Re: 2010 Camaro Wheels on Lowered C10
 

Mine were not hubcentric but the inside of the adapter was snug on the hub. If you really think about it, a lot of wheels with the two bolt patterns have an opening much bigger than the hub diameter and rely on the lugs to be center. As long as the wheel uses acorn lug nuts, the wheel should be centric. With that being said, im a over achiever and use hubcentric wheels and adapters when I can.

Re: 2010 Camaro Wheels on Lowered C10
 

Good points. Thanks man!

Re: 2010 Camaro Wheels on Lowered C10
 

The truck in the pic with the 15"s on the first page doesn't look quite that low. My old 79 was 5/6" and the front looks lower. It was running a 255/60/15 and the edges were past the fender lips.

Re: 2010 Camaro Wheels on Lowered C10
 

It does look a little higher, may be the angle. Im using 2.5 drop spindles, 2.5 springs that were cut about half a coil, flip kit and 2 inch shackles. heres a little better pic.
http://i799.photobucket.com/albums/y...ps3d404040.jpg

Re: 2010 Camaro Wheels on Lowered C10
 

Schoolboy, did the normal 1/2x20 lug nuts work with those wheels. I'm assuming any acorn lug nut works but I'd like to know for sure.

Thanks

Re: 2010 Camaro Wheels on Lowered C10
 

I love them!!

Re: 2010 Camaro Wheels on Lowered C10
 

Normal acorn 1/2-20's worked. sorry for the late response btw.

Re: 2010 Camaro Wheels on Lowered C10
 

Got my camaro rims bolted up! I think I need to drop it down some more. I have a 2" drop hanger, 2" shackle and lower shocks on the rear and the fender lip sits about 3 1/2" higher than top off tires. I have also installed new leaf springs. How much more do you guys think a axle flip will drop it? What do you guys think about removing the helper spring and how much would that drop it? I would like the fender lip to sit even to 1" lower than tires. http://imgur.com/odMx0fG
http://imgur.com/soh4c6s

Re: 2010 Camaro Wheels on Lowered C10
 

I've ordered 1.5" adapters, but was recently informed that they won't work for the front. We will see I guess. I may be ordering another set.

I got the 1.5" because i wanted to make sure that they cleared the fenders when I go lower.

Re: 2010 Camaro Wheels on Lowered C10
 

I think the Camaro wheels look great on there

Re: 2010 Camaro Wheels on Lowered C10
 

I believe that a flip kit will drop it 5" more.

Re: 2010 Camaro Wheels on Lowered C10
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: 2010 Camaro Wheels on Lowered C10
 

Guys its been a while but here is my truck with the camaro rims. Let me know what ya think. http://imgur.com/rlh0jnj - http://imgur.com/tdCewCl - http://imgur.com/lBTqg8Q

Re: 2010 Camaro Wheels on Lowered C10
 

Tha assist for Jroc

Re: 2010 Camaro Wheels on Lowered C10
 

I think what looks odd about them (I do like the wheels...not knocking them at all here...) is that these lowered squares IMO look aggressive with a more negative offset. That wheel style looks good on the truck but would be a lot better if the hubs were tucked in more.

Re: 2010 Camaro Wheels on Lowered C10
 

Thanks, Pop's! How are you getting the pics to show up? Gmachinz I hear ya, to each his own, I think they match the body line very well. It would be nice if this style rim was made with a truck offset so we could compare.

Re: 2010 Camaro Wheels on Lowered C10
 

Saw this one n thought it was a sharp looking truck. http://i60.tinypic.com/235e6b.jpg http://i61.tinypic.com/29wohg1.jpg

Re: 2010 Camaro Wheels on Lowered C10
 

Mounted mine today and am up in the air about the look. Hoping they grow on me a bit!

Re: 2010 Camaro Wheels on Lowered C10
 

What size of tires can I use for 2012 camaro wheels on my 1982 gmc truck? Any suggestions?

Re: 2010 Camaro Wheels on Lowered C10
 

I believe they come with 245/45/20 and 275/40/20. Really also depends how low your truck is.

Re: 2010 Camaro Wheels on Lowered C10
 

Is that what you have on yours?

Re: 2010 Camaro Wheels on Lowered C10
 

yes

Re: 2010 Camaro Wheels on Lowered C10
 

Nice

Re: 2010 Camaro Wheels on Lowered C10
 

alright my truck is pretty much just like school boys i got 1.75 in the back and 1.5 in the front and the front wheels dont go all the way to the adapter maybe half a inch. did yall have to do anything to get past that?

Do you have some pictures? Did you try the adapters on the rims to make sure they would mount correctly?
Posted via Mobile Device

Re: 2010 Camaro Wheels on Lowered C10
 

Don't have any pictures right now. But the wheel is hitting on the rotor hub. I have the heavy duty rotors and was wondering if that's why it's hitting. Is there a difference between 1 inch rotors and 1.25?the adapter fit wheel great. Adaptec brand. Gonna grind the hubs down some tonight and see what I can do

Re: 2010 Camaro Wheels on Lowered C10
 

I used 2" thick spacers front and back

Re: 2010 Camaro Wheels on Lowered C10
 

i grinded the inside of wheels and hubs and they fit now. idk how to post pictures or i would of it done.

Re: 2010 Camaro Wheels on Lowered C10
 

i would definitely sport those camaro wheels. they look great.

i've got a set of 2002-2004 silverado ss wheels on my 87 k10 (v1500) and i love 'em.

http://photo.netcarshow.com/Chevrole...3_photo_09.jpg

Re: 2010 Camaro Wheels on Lowered C10
 

Ran across a set of these wheels pretty cheap about a month ago. They were flaking and had some pretty serious curb rash. I took them to my powdercoat guy and he fixed them up for me. Its hard to photograph but they have a ton of flake in them and really shine/sparkle in the sun.

I had to roll my front fenders, I also have a degree or two of positive camber I can dial back to help. If your really low, these probably aren't the best wheels to get. They have the stock camaro sizes on them now (245/45 and 275/40) I'm going to have to switch to a 245/40 up front as I bottom out on the inner fender still at bridges and large dips in the road. I'll have to see how I feel about them after a few weeks to see if they stay around or not...

http://i644.photobucket.com/albums/u...psrulvdtug.jpg

http://i644.photobucket.com/albums/u...ps0mgusz3a.jpg

http://i644.photobucket.com/albums/u...ps0mifdnsf.jpg

Re: 2010 Camaro Wheels on Lowered C10
 

I'm just not a fan of factory wheels in general. Something about a wheel that when I see and recognize that it is off of a different car turns me off.

Re: 2010 Camaro Wheels on Lowered C10
 

[QUOTE=bluex;7738166]Ran across a set of these wheels pretty cheap about a month ago. They were flaking and had some pretty serious curb rash. I took them to my powdercoat guy and he fixed them up for me. Its hard to photograph but they have a ton of flake in them and really shine/sparkle in the sun.

I had to roll my front fenders, I also have a degree or two of positive camber I can dial back to help. If your really low, these probably aren't the best wheels to get. They have the stock camaro sizes on them now (245/45 and 275/40) I'm going to have to switch to a 245/40 up front as I bottom out on the inner fender still at bridges and large dips in the road. I'll have to see how I feel about them after a few weeks to see if they stay around or not...



What are the GMC centers from?
Jay

Re: 2010 Camaro Wheels on Lowered C10
 

They are the stock camaro centers, I peeled the metal part with the embossed bowtie off, covered them with silver vinyl an then made a GMC decal to go on that.

Re: 2010 Camaro Wheels on Lowered C10
 

How did you roll the fenders? :D

Re: 2010 Camaro Wheels on Lowered C10
 

This pretty cool guy I know helped me out with that... :metal:

Re: 2010 Camaro Wheels on Lowered C10
 

Wow, thing thread keeps popping up!
Yea, the stock Camaro tires are a little tall with a really low truck at 28" tall. I hit my inner fenders quite often.

Re: 2010 Camaro Wheels on Lowered C10
 

now now cameltoe white letters are cool on old trucks way cooler than trucks that are lower than cars lol ..... just a poke