Re: Reconditioned gauge Clusters F/S
 

What are your thought on adding vacuum gauge with a repop gauge? I already have a tach cluster with new bezel and circuit board. I'd like to have it cleaned and tested though.

Re: Reconditioned gauge Clusters F/S
 

Hi Keith,

PM sent,
Thank you,
Tom

Re: Reconditioned gauge Clusters F/S
 

ttt

Contact me for all of your gauge cluster needs. I build from my inventory, restore your existing cluster and sell parts.

Thank you all for looking,
Tom

Re: Reconditioned gauge Clusters F/S
 

ttt

Remember, I give two microfiber towels with a cluster order or restoration service.

I will stand behind my work and offer a 90 day warranty on all cluster restorations.

Ask me about my own tach harnesses for point style and HEI ignition systems.

Thank you for looking,
Tom

Re: Reconditioned gauge Clusters F/S
 

Check out the Web site for a special announcement. Look at the home page for details and good luck.

Take care,
Tom

Re: Reconditioned gauge Clusters F/S
 

Just a suggestion to anyone who has used Tom's services. There is a Customer Reviews & Feedback section on the web site. I for one read reviews on everything I buy on the interweb. Leave a review, help a brother out...

Re: Reconditioned gauge Clusters F/S
 

I appreciate it sir
Tom

Re: Reconditioned gauge Clusters F/S
 

Tom,
Would you like to have used gauges? I bought a cluster for the fuel gauge and I don't need the rest. from a 70 c10
mike

Re: Reconditioned gauge Clusters F/S
 

Hi Mike,

Yes, always looking for usable gauges and other cluster parts.

PM me and let me know what you have and need for payment.

I appreciate it, thank you,
Tom

Re: Reconditioned gauge Clusters F/S
 

Tom, I'll UPS these to you free just pm your info.

http://i1308.photobucket.com/albums/...psd7a23856.jpg

http://i1308.photobucket.com/albums/...psb3abf8ff.jpg

http://i1308.photobucket.com/albums/...ps8b08fa00.jpg

Re: Reconditioned gauge Clusters F/S
 

Wow, thank you so much Mike. PM is on the way.

Take care,
Tom

Re: Reconditioned gauge Clusters F/S
 

Tom, I'll take care of the shipping, you never can tell I may need something in the future
mike

Re: Reconditioned gauge Clusters F/S
 

Tom, I'm a loyal follower of your savy work on these clusters, Iv'e had better luck at zeroing out the speedo with the square slot beter than the later style with the round hole on the tin. The 67 one I had zeroed out was the square one and I gave it away to gdavis on this fourm. Is there a way I can zero out a 63 model c-10 speedo for a friend, are they the same style or same situation....Kinda like a rubik cube ha ha....Also do you offer silk screening services for cluster that have rusted??? If so I may need some work done..God Bless.....

Re: Reconditioned gauge Clusters F/S
 

You should be able to zero the odometer on the 62 the same way as the 67. I am not 100% sure I follow you on the method. Are you talking about the square hole where the speedometer cable goes? When you say "the later style with the round hole in the tin" I am not sure what you are talking about.

What year cluster do you need silk screening on? I can do it either way. The actual silk screening is a little pricey or there is the overlay option which is more affordable but limited to what year you need it for.

Let me know and thank you,
Tom

Re: Reconditioned gauge Clusters F/S
 

Mike,

Very nice of you and please let me know if you ever need anything in the future.

I appreciate this,
Take care,
Tom

Re: Reconditioned gauge Clusters F/S
 

ttt

taking orders or restoring your existing cluster. I can take care of your gauge cluster needs.

Please help support "Project Underhaulin" it is for a great cause and even small donations help.

Happy Holiday to all,
Tom

Re: Reconditioned gauge Clusters F/S
 

A small portion of the inventory at Classic Gauge and Cluster.

I have what you need for any cluster build.

Coming in June, some more standard tach clusters restored for sale.

Thank you for looking.

Tom

Re: Reconditioned gauge Clusters F/S
 

I have a tach cluster with air pressure gauge how rare is that ?

Re: Reconditioned gauge Clusters F/S
 

I am not sure I would call them rare. Although the air gauge was not used on the 10-40 series, they were actually pretty common on the 50 + series trucks with air brakes. Someone correct me if I am wrong but I personally have never seen one in a 40 series.

They are now commonly used on our trucks for people who have air ride suspensions as a monitor of air pressure.

If you have one that is in better than average condition, it is worth in today's market about $250.00-$450.00, depending on condition. A completely restored one might get you close to $600.00

Another note is that these air gauges or lenses are not reproduced.

Hope this helps
Tom

Re: Reconditioned gauge Clusters F/S
 

Thanks for the info i really don't need the air gauge in my cluster i bought it on craigs list for $100 and would like to get it restored is there any thing you can replace the air gauge with ?

Re: Reconditioned gauge Clusters F/S
 

You can put a factory style vacuum gauge in the same location with no other modifications. You will need a vacuum gauge and a tach/vacuum gauge lens which are available reproduced.

Re: Reconditioned gauge Clusters F/S
 

Subbed for future reference.

Re: Reconditioned gauge Clusters F/S
 

I appreciate it,
Tom

Re: Reconditioned gauge Clusters F/S
 

CLASSIC GAUGE AND CLUSTER IS MOVING SOON :)

I have leased a small 900 square foot store front in Junction City, Oregon and will be moving the operation from Oxford, MI to my new home in Oregon. This will allow me to do everything all in one place and not waste time.

I currently have 5 cluster jobs going that need to be finished and it will be around the beginning of October before I am set up and running in Junction City.

I could not do any of this without my wonderful CFO/fiancee Heather and my many loyal customers.

I appreciate all of the business and support from everyone.

Take care,
Tom

Re: Reconditioned gauge Clusters F/S
 

ttt

I can still take care of some cluster builds up until the middle of August. I will be getting packed and moved to Oregon. I expect to be back in action full time by the beginning of October.

Stay tuned for a tach cluster build from my inventory ;)

Thank you
Tom

Re: Reconditioned gauge Clusters F/S
 

Do you have a proper working 67-72 fuel gauge that I can buy?

Re: Reconditioned gauge Clusters F/S
 

Yes, sending PM.

Re: Reconditioned gauge Clusters F/S
 

Have a 67 cluster would like done how much.

Re: Reconditioned gauge Clusters F/S
 

Is it a non tach or tach cluster. Do you want to send yours to restore or buy one that I build?

I can build one (non tach) with the correct 67/68 black/chrome bezel from my inventory for $225.00 shipped. I would have to look at what you have before I can quote a price to restore what you have?

I offer a 90 day warranty with my cluster build as well.

What is your time frame for completion?

Thank you,
Tom

Re: Reconditioned gauge Clusters F/S
 

It's non tach I could send you mine. Will it even save me that much to send it. Like it maybe in a 3 to 4 weeks

Re: Reconditioned gauge Clusters F/S
 

You could send yours but it will most likely cost you around $15.00-$20.00 to ship it. I normally give $30-$40.00 for a good core so it would save you $15.00 to $20.00 by sending it. I will leave it up to you.

I should have no problem getting you done and shipped out with in 4 weeks.

I will send you a PM

Thanks again,
Tom

Re: Reconditioned gauge Clusters F/S
 

I will take one send pm I will just take one you have done for a 67

Re: Reconditioned gauge Clusters F/S
 

Sounds good. I will get it going soon. I sent you a PM with payment details.

Thank you, I appreciate it.
Tom

Re: Reconditioned gauge Clusters F/S
 

Here is one i just finished for a customer with a 1967 GMC

Re: Reconditioned gauge Clusters F/S
 

That looks great hope mine is not blue lol

Re: Reconditioned gauge Clusters F/S
 

No sir, yours will be green, just kidding ;) That one was a lot of work to get that way.

Thank you,
Tom

Re: Reconditioned gauge Clusters F/S
 

ttt

I have inventory for just about any combination of 1967-1972 gauge cluster you may need.

Also see my thread for tach harnesses.
http://67-72chevytrucks.com/vboard/s...d.php?t=609407

Thank you for looking,
Tom

Re: Reconditioned gauge Clusters F/S
 

Great work! Love that blue 67 one!

Re: Reconditioned gauge Clusters F/S
 

Thanks Jonathan,

The customer was very pleased with it. We try :)

Re: Reconditioned gauge Clusters F/S
 

ttt

Classic Gauge and Cluster is getting ready for the move from Michigan to Oregon. We will be back in action full time on the first week of October in Oregon.

I still have plenty of time to build some high quality clusters before I start packing.

Take care,
Tom