Re: finally come
1 Attachment(s)
and 50yrs of grime, well after several rounds of wire wheel'n and scrap'n and wirewheel'n and scrap'n. almost paint ready
|
Re: finally come
1 Attachment(s)
great reason to wear face protection when wirewheel'n. i only had googles on!!!
|
Re: finally come
Looks like you have been busy.
Did you end up getting that antenna that I told you about ? |
Re: finally come
Quote:
|
Re: finally come
Looks like you have the same year/model that I just purchased. I'm looking forward to following your build. I'm in the "research" phase myself at this point, but in general I'm planning a full restomod.
|
Re: finally come
Quote:
|
Re: finally come
1 Attachment(s)
i found a 4 speed column $60
|
Re: finally come
1 Attachment(s)
found a oem speaker also, yea christmas came 9 days early!!!
|
Re: finally come
1 Attachment(s)
Quote:
|
Re: finally come
Quote:
just a thought , but on a 4X4 I prefer the doors, it is high enough up that you have to crawl over/onto the gate to get at stuff... in an ideal world I would re-design it so that it has a lift gate (no post in the rear view mirror), and doors on the bottom. |
Re: finally come
Quote:
|
Re: finally come
1 Attachment(s)
starter and alt. rebuild parts. im rebuild'n them cuz they have proper date codes and i get to see the insides and understand them better!!!
|
Re: finally come
1 Attachment(s)
call me nos parts junky $21
|
Re: finally come
Wow Pimp. I think you spend more time hunting and picking parts than anyone on here. I have to give you credit for your patience and vision. It's gonna be an awesome truck and I'll continue checking in.
|
Re: finally come
2 Attachment(s)
Will this work? its not NOS
|
Re: finally come
Quote:
|
Re: finally come
1 Attachment(s)
electrolysis tank, i need to figure a way to do the whole truck!!!
|
Re: finally come
1 Attachment(s)
its alive
|
Re: finally come
1 Attachment(s)
Quote:
|
Re: finally come
1 Attachment(s)
exhaust still brewin'
|
Re: finally come
Quote:
[hint, some stripping company's have full dunk tanks] I dont know what the cost of that is but I know a man here in AZ that does that, last time I was at his shop he had a MBZ 300 gullwing he was dipping. |
Re: finally come
Quote:
|
Re: finally come
Best way to have at it... elbow grease.. Just pay attention to all the small tight corners and holes,,, go slow,, pay attention to details..
|
Re: finally come
Quote:
|
Re: finally come
Quote:
Would it not burn off with the heat ? |
Re: finally come
Quote:
|
Re: finally come
warning site down for the holidays!!! merry christmas to all!!! hope you were good cuz santa has been watching...
|
Re: finally come
1 Attachment(s)
needs to be wire wheel'd and the i can clear coat to keep that oem castiron look... my girlfriends toes btw
|
Re: finally come
1 Attachment(s)
sneak peek!!!
|
Re: finally come
Quote:
|
Re: finally come
Quote:
|
Re: finally come
Are you sure about that?
|
Re: finally come
Quote:
Thanks for the info. You must have an understanding girl friend if you can store your parts in the washroom. |
Re: finally come
2 Attachment(s)
Quote:
|
Re: finally come
2 Attachment(s)
the temp says it all
|
Re: finally come
1 Attachment(s)
more parts
|
Re: finally come
1 Attachment(s)
im in NOS overload, oh i will add copper rings to make em correct...
|
Re: finally come
1 Attachment(s)
last one of the day...more tomorrow!!!
|
Re: finally come
Quote:
|
Re: finally come
Quote:
|
All times are GMT -4. The time now is 12:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com