The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   CA 1972 Suburban Part out (https://67-72chevytrucks.com/vboard/showthread.php?t=663998)

engairuph 05-17-2015 04:27 PM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by budnikguy (Post 7175604)
Yes that is it, shipped to 39503 business

Grandpa54 05-17-2015 04:58 PM
Re: 1972 Suburban Part out
 
Thanks for the picks of the fuel sender , i was hoping it it was the one with the vent, it will not work for me at this time, mark

budnikguy 05-17-2015 05:15 PM
Re: 1972 Suburban Part out
 
The lock, clip, both rods, and you need the mechanism? LMK and I can figure cost and shipping.

Quote:
Originally Posted by engairuph (Post 7175720)
Yes that is it, shipped to 39503 business

Chevy Fan Always 05-17-2015 06:20 PM
Re: 1972 Suburban Part out
 
I wasnt sure if you saw this post:I would be interested in the cowl air flapper door, the plastic piece and screws on the outside firewall that holds it and the little plastic nut and receiver that the door pivots on, that is on the cab side of the firewall. Also the voltage regulator if you still have it? ships to 44805

Thanks Mike Wilson

engairuph 05-17-2015 08:33 PM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by budnikguy (Post 7175778)
The lock, clip, both rods, and you need the mechanism? LMK and I can figure cost and shipping.
I need what you have on the hood showing

twistedchevy 05-21-2015 01:15 AM
Re: 1972 Suburban Part out
 
Do you have the rear ac fan speed switch that goes in the gauge cluster?

Chevy Fan Always 05-21-2015 07:03 AM
Re: 1972 Suburban Part out
 
Is the voltage regulator and condenser still available?
Mike

Mr. D 05-22-2015 03:54 AM
Hi twisted, I've got a deal working for the complete front and rear ac components off this vehicle and so would expect that the rear fan switch would be part of the complete Assy.
Posted via Mobile Device

twistedchevy 05-22-2015 05:32 PM
Re: 1972 Suburban Part out
 
OK just hoping he has an extra

Mr. D 05-22-2015 05:40 PM
Re: 1972 Suburban Part out
 
NP Twisted!:5150:

BTW do you have a build thread going for any of your projects?
Any pics?

Cheers!:c2:

twistedchevy 05-23-2015 12:44 AM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by Mr. D (Post 7182153)
NP Twisted!:5150:

BTW do you have a build thread going for any of your projects?
Any pics?

Cheers!:c2:
Yea I have one for my 72suburban

engairuph 05-24-2015 07:37 AM
Re: 1972 Suburban Part out
 
Any luck with a total yet on the rear lock, mechanism and rods?

sasquatch58 05-30-2015 12:30 AM
Re: 1972 Suburban Part out
 
is the brake pedal assy still available and do you know if this one also fits a c-10 pickup .thanks

uaengineer 06-03-2015 06:25 PM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by budnikguy (Post 7142246)
I will get them out and take some pics for you.....
Have you been able to get the other set of parchment door panels out yet?

Mr. D 06-05-2015 04:56 PM
Re: 1972 Suburban Part out
 
Ok, So I've decided (sort-of) to go a different direction with my door hardware and eventually door panels.
Since my 68 is missing so many pieces of door hardware already, I'm now considering going with all new (replacement) window and door cranks out of a 72. This way I can use the molded door panels.
Do you still have any of the following out of the 72?:
- All 4 window cranks
- All 3 door cranks
Thanks!

RedRoad 06-08-2015 01:13 AM
Re: 1972 Suburban Part out
 
Did the front bumper ever get sold? Still interested

Thanks

budnikguy 06-09-2015 11:48 AM
Re: 1972 Suburban Part out
 
Here are pics of inner fender wells I pulled from a different suburban...I will be removing them from this 72 custom deluxe also, but I do not have a time frame for that..I am posting the spare tire hump for you also...LMK

Adam

http://i163.photobucket.com/albums/t...psd0y11cu0.jpg

http://i163.photobucket.com/albums/t...pse8hx2tmh.jpg

http://i163.photobucket.com/albums/t...pstlbvwz0x.jpg

http://i163.photobucket.com/albums/t...ps875x3hys.jpg

http://i163.photobucket.com/albums/t...pstoo4afpc.jpg

http://i163.photobucket.com/albums/t...psnnzxp3p2.jpg

http://i163.photobucket.com/albums/t...psqorc6ahr.jpg

http://i163.photobucket.com/albums/t...pso1feoq98.jpg

http://i163.photobucket.com/albums/t...pstri1a3g0.jpg

http://i163.photobucket.com/albums/t...pszzicqwsl.jpg

http://i163.photobucket.com/albums/t...ps5iklhrdp.jpg

http://i163.photobucket.com/albums/t...pstvuf61os.jpg

http://i163.photobucket.com/albums/t...psijt8zzs4.jpg

http://i163.photobucket.com/albums/t...psmmdx6nsu.jpg

http://i163.photobucket.com/albums/t...pstfnjyqfn.jpg

http://i163.photobucket.com/albums/t...psqlavoc5j.jpg





Quote:
Originally Posted by Chief Z (Post 7167491)
Looking for a spair tire tub and rear fender wells if in decent condition. Please provide pics of the bolt areas?

budnikguy 06-09-2015 11:49 AM
Re: 1972 Suburban Part out
 
Struggling with removing the wiring that runs through the top of the suburban body...please hang in there...

Quote:
Originally Posted by Mr. D (Post 7181505)
Hi twisted, I've got a deal working for the complete front and rear ac components off this vehicle and so would expect that the rear fan switch would be part of the complete Assy.
Posted via Mobile Device

budnikguy 06-09-2015 11:50 AM
Re: 1972 Suburban Part out
 
Missed this post...I will get shipping quot asap.


Quote:
Originally Posted by engairuph (Post 7183602)
Any luck with a total yet on the rear lock, mechanism and rods?

budnikguy 06-09-2015 11:52 AM
Re: 1972 Suburban Part out
 
Yes i do, and yes it does ft a truck as they are the same...

http://i163.photobucket.com/albums/t...psguskfw1c.jpg

http://i163.photobucket.com/albums/t...ps1uzki0nc.jpg

http://i163.photobucket.com/albums/t...ps2dgl6slq.jpg

http://i163.photobucket.com/albums/t...psxvevo38e.jpg









Quote:
Originally Posted by sasquatch58 (Post 7191233)
is the brake pedal assy still available and do you know if this one also fits a c-10 pickup .thanks

budnikguy 06-09-2015 11:53 AM
Re: 1972 Suburban Part out
 
Bumper sold...yeah

Quote:
Originally Posted by RedRoad (Post 7202020)
Did the front bumper ever get sold? Still interested

Thanks

Mr. D 06-09-2015 12:27 PM
Re: 1972 Suburban Part out
 
Thanks for the update Adam!

BTW - don't know if you saw the request or if you still have them, but I'm now in the market for the window regulators and door regulators for all 3.5 doors.
LMK if you still have any of these.

engairuph 06-17-2015 07:30 AM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by budnikguy (Post 7175778)
The lock, clip, both rods, and you need the mechanism? LMK and I can figure cost and shipping.
Any luck with all the lock and rods from back door shipping?

budnikguy 06-19-2015 02:23 PM
Re: 1972 Suburban Part out
 
Got it all together, can get it boxed and shipped out to you next week...will PM you payment details.

Adam


Quote:
Originally Posted by engairuph (Post 7212561)
Any luck with all the lock and rods from back door shipping?

pat english 06-19-2015 03:15 PM
Re: 1972 Suburban Part out
 
Are you cutting the cab on this one?

budnikguy 06-19-2015 04:51 PM
Re: 1972 Suburban Part out
 
It is a definite possibility, what are you needing?



Quote:
Originally Posted by pat english (Post 7215050)
Are you cutting the cab on this one?

pat english 06-20-2015 03:30 PM
Re: 1972 Suburban Part out
 
These areas.
http://i305.photobucket.com/albums/n...psvlrvg48d.jpg
http://i305.photobucket.com/albums/n...ps5nlgyaq0.jpg
http://i305.photobucket.com/albums/n...psyatphm1i.jpg
http://i305.photobucket.com/albums/n...ps4biv9wjy.jpg

engairuph 06-20-2015 09:16 PM
Re: 1972 Suburban Part out
 
How much for the chrome trim below the windows on both sides?

Mr. D 06-20-2015 10:00 PM
Wow that's some serious rot there English!
Posted via Mobile Device

pat english 06-21-2015 02:18 PM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by Mr. D (Post 7216235)
Wow that's some serious rot there English!
Posted via Mobile Device
yeah for sure.thats not even the worst on this truck though...I need to replace the A pillar too.I already have that cut from another truck.Im hoping to get started on that repair soon..

Mr. D 06-23-2015 02:34 AM
Re: 1972 Suburban Part out
 
That A-pil replacement is no joke.
Check out my buddy dwilbur,s thread
4x4 Projects and Builds>71 4X4 Frame off Restoration
Posted via Mobile Device

Cobalt964ruf 06-23-2015 04:03 AM
Re: 1972 Suburban Part out
 
how much for the trim right under the window line, all the way around/all pieces?

LudwigTheMad 06-25-2015 05:19 PM
Re: 1972 Suburban Part out
 
I interested in the rear end as a whole unit from backing plate to backing plate or as cut away.

I'm in San Diego, so I can come pick up. NO costly freight shipping.

Pm me

If it's not sold already.

pat english 06-26-2015 12:11 AM
Re: 1972 Suburban Part out
 
Quote:
Originally Posted by Mr. D (Post 7218560)
That A-pil replacement is no joke.
Check out my buddy dwilbur,s thread
4x4 Projects and Builds>71 4X4 Frame off Restoration
Posted via Mobile Device
Oh yeah for sure.Thanks for the tip.

Chuck K 06-26-2015 01:55 PM
Re: 1972 Suburban Part out
 
Adam,
Do you have a set of third seat, seat brackets for a suburban. Thanks

1tuff71 06-27-2015 08:19 AM
Re: 1972 Suburban Part out
 
How much for the gauges shipped to 29730

1tuff71 06-27-2015 11:00 AM
Re: 1972 Suburban Part out
 
Guess I should ask if the gauges work or not and cost. Will take it all if the circuit board is good too. cost to ship to 29730

LudwigTheMad 06-30-2015 01:12 PM
Quote:
Originally Posted by LudwigTheMad (Post 7221464)
I interested in the rear end as a whole unit from backing plate to backing plate or as cut away.

I'm in San Diego, so I can come pick up. NO costly freight shipping.


so are you going to reply to me or am I just going to go look somewhere else. I know you're busy and there's a lot of posts on here for letting me know whether or not this still available in a timely fashion. and what would you charge for it.

Pm me

If it's not sold already.
Posted via Mobile Device

budnikguy 06-30-2015 09:00 PM
Re: 1972 Suburban Part out
 
Rear end is available, unsure of the ratio, non posi.. $150 complete drum to drum.


Quote:
Originally Posted by LudwigTheMad (Post 7226385)
Posted via Mobile Device

budnikguy 06-30-2015 09:01 PM
Re: 1972 Suburban Part out
 
This was a non running truck, so I cannot verify gauges work as they should...circuit looks good though. $40 plus the tide..and I can post better pics front and rear. lmk



Quote:
Originally Posted by 1tuff71 (Post 7223167)
Guess I should ask if the gauges work or not and cost. Will take it all if the circuit board is good too. cost to ship to 29730


All times are GMT -4. The time now is 03:47 AM.
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com