Re: Ken's 1966 C10 Short Fleetside build
 

This weekend I installed a new RetroSound Hermosa stereo and kick panels. I really like the ability to make it fit my dash though getting it properly aligned was time consuming. Sometimes I wish the PO would have cut the dash so I could just install a modern stereo.

At first the sound was barely audible when I connected to a set of high wattage 6-1/2 speakers (400w each) that I already had, and since the stereo is only 25w/channel it couldn't properly drive them. So I went out and bought some lower wattage Kenwoods and a small amp to fit under the dash. I bridged the amp to pull some more volume and still can turn up the volume max and not consider it "blasting". I added a third speaker to the center which helped bring the sound out of the weeds but its still not there for me. Perhaps I'm expecting too much out of a couple of 6-1/2 kick panel speakers.

I have a powered 100w 8" subwoofer on it's way that will go under the seat so hopefully that will fill in the lower range I'm missing. Ultimately I think I need to put some larger speakers behind the seat with a bigger amp when I remove the tank in exchange for an underframe tank. But that will have to wait for now.

I suppose it doesn't help that I have dual 2-1/2 pipes running through a set of Flowmaster 40's to drown out any music above 50 mph. :metal:
Most of the cab is already insulated with a sound barrier but I haven't done behind the tank where much of the drone is probably coming from. The mufflers are far enough back right before the axle and the pipes dump straight out under the bumper but these 40's still drone alot. Seems like its always a toss up... I want a good bark from the exhaust but not the drone feedback into the cab. :waah:

Re: Ken's 1966 C10 Short Fleetside build
 

Update to the audio set up, the 100w powered subwoofer arrived today and I hooked it up under the seat. Made a huge difference. Output still seems weak from the kick panels but at least it rocks a little harder now :metal:

Re: Ken's 1966 C10 Short Fleetside build
 

Truck looks awesome dude! I love the paint colour

Re: Ken's 1966 C10 Short Fleetside build
 

Thanks, it took me long enough to decide on and probably aggravated the hell out of the paint shop.

Re: Ken's 1966 C10 Short Fleetside build
 

Before and after shots. Next week the wheels go on!

Re: Ken's 1966 C10 Short Fleetside build
 

Santa borrowed my truck this weekend for our Christmas party.

https://scontent-lax3-2.xx.fbcdn.net...24&oe=58E94EDD

Re: Ken's 1966 C10 Short Fleetside build
 

Awesome picture!!! Merry Christmas Santa, sweet ride!!!

Re: Ken's 1966 C10 Short Fleetside build
 

Love it, Looks like Santa is happy too!

Re: Ken's 1966 C10 Short Fleetside build
 

Yup....


I like that.


Santa and all the lights.

Re: Ken's 1966 C10 Short Fleetside build
 

Finally got my wheels made.

https://scontent-lax3-2.xx.fbcdn.net...12&oe=591BA361

Re: Ken's 1966 C10 Short Fleetside build
 

Nice truck. Excellent color choice. I like the daily style build.

rob

Re: Ken's 1966 C10 Short Fleetside build
 

Wheels look good. Nice job!

Re: Ken's 1966 C10 Short Fleetside build
 

Red Ale is all packed up and ready to go out to Tampa.

https://scontent-lax3-2.xx.fbcdn.net...c9&oe=592B1A9D