Re: 60-66 gauge cluster restoration
 

Hi Dan,

Do you have the tach and the vac gauge you want to use? I normally use the aftermarket tachs for theses cluster builds but they only have a 5K max RPM.

I am not really looking to trade labor for extra parts. I have done it in the past and usually wind up with boxes full of cluster parts that are no good to use.

You can send me an email to tbonegarris@yahoo.com if interested in getting a cluster restored.

Thank you,
Tom

Re: 60-66 gauge cluster restoration
 

Thought I would bring it back up. We are back in business but on a much smaller scale than before.

Thank you,
Tom

Re: 60-66 gauge cluster restoration
 

OK folks,

Had to bring it back to the top after over a year.

Let me know if you have any restoration needs. I am ramping up for the winter months.

Looking forward to helping all of you in need with your clusters.

Take care,
Tom

Re: 60-66 gauge cluster restoration
 

Tom did the ammeter to volt meter and oil gauge to elecric sender oil gauge on my gauge panel and he did marvelous work.
http://67-72chevytrucks.com/vboard/s...&postcount=126

Re: 60-66 gauge cluster restoration
 

Really appreciate the nice words. Glad you are happy with the work.

Take care,
Tom

Re: 60-66 gauge cluster restoration
 

Wow,

I did not realize it was so long since I brought this one up.

Still doing these clusters for you all. Please let me know if I can help.

Take care,
Tom

Re: 60-66 gauge cluster restoration
 

Hey brotha could you restore my 61 cluster? I have a broken speedometer and a hazy lense that has the original 60-61 chrome rings

Re: 60-66 gauge cluster restoration
 

Sorry for the late response. I am sure I can help you.

I would need to do an evaluation on it and see what needs to be done . If you are interested, send me a PM and I can send you shipping information. Speedometer repair will depend on what parts are needed, if any.

Thank you for the interest ,
Tom

Re: 60-66 gauge cluster restoration
 

Hello,

I was wondering if you are still actively restoring these gauge clusters?

60-66 gauge cluster restoration
 

Check out his FB page https://www.facebook.com/classicgaugeandcluster

Sure looks like he is.

Re: 60-66 gauge cluster restoration
 

Sorry for the late response. At this time, I am not taking any more work. I am relocating to AZ and will be suspending cluster work until I get settled and a new shop up and running.

Re: 60-66 gauge cluster restoration
 

Checking in to see how close you are in respect to doing any more restorations, I have one I would like to have done…..

Re: 60-66 gauge cluster restoration
 

Have tried to contact Tbone here and on Facebook, no luck…..does anyone else have a source for restoring a gauge cluster…upgrading the electrical system so an amp gauge is a no go…
Thanks

Re: 60-66 gauge cluster restoration
 

Call John or Tammy at Redline

John & Tammy Dvorski
Redline Gauge & Clock Repair
731-571-0766

3427 W. Cedar Lake Rd.Greenbush, MI 48738

Re: 60-66 gauge cluster restoration
 

Thanks, will call tomorrow……