The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR Parting out 72 Suburban C10 402 TH400 (https://67-72chevytrucks.com/vboard/showthread.php?t=516049)

Slinger60 04-01-2012 08:02 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Yea Tom I will take the drivers door molding also send P.M. with total and I will pay you. Thanks Shawn

tll74 04-03-2012 01:08 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Parts sold of the 72 C10 402 sub.

Slinger60...lower moldings
budnikguy....Ign.clyinder-door lock clyinders-hatch clyinder-with matching key.
4xshort...horn button, radio patch, wiper motor w/washer, horns w/wire. payment pending
capev86...mirrors, upper gate supports, tg and hatch hinges, bb dual exhaust hangers.
rockc...3 piece inner trim panels. payment pending.

tll74 04-03-2012 01:27 AM

Re: Parting out 72 Suburban C10 402 TH400
 
1 Attachment(s)
Quote:

Originally Posted by Gary 70 Jimmy (Post 5287164)
Did you get any pictures of the stove pipe.

Gary, Heres a pic of the heat stove. I do not have the pipe. Looks very solid considering. I will be pulling it soon and acid dipping it. 60.00 shipped.
Thanks, Tom

sunk99 04-04-2012 10:35 PM

Re: Parting out 72 Suburban C10 402 TH400
 
How much for the Left front fender,front marker lights, and right front door latch shipped to Knoxville Tn, 37931?

425HP409 04-04-2012 10:50 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Put me first for the door panel stainless trim, I need to get an answer back from my customer in the morning and I will let you know.

sunk99 04-04-2012 11:06 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by sunk99 (Post 5294844)
How much for the Left front fender,front marker lights, and right front door latch shipped to Knoxville Tn, 37931?

Also the right rear reverse lense, and the right quarter front lower molding. Thanks

425HP409 04-04-2012 11:26 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Sold, door panel trim

tll74 04-05-2012 02:49 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by sunk99 (Post 5294844)
How much for the Left front fender,front marker lights, and right front door latch shipped to Knoxville Tn, 37931?

The LH fender and front markers are junk. The RH quarter front molding is sold. 49.00 shipped on the RH door latch and reverse lens.
Quote:

Originally Posted by 425HP409 (Post 5294978)
Sold, door panel trim

Send me your zip for shipping cost.

Thanks, Tom

shawno72 04-05-2012 04:06 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Do you have a good radiator?

tll74 04-05-2012 05:21 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by shawno72 (Post 5296030)
Do you have a good radiator?

Hey Shawn, I just answered your PM. Tom

shawno72 04-05-2012 06:38 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by tll74 (Post 5296148)
Hey Shawn, I just answered your PM. Tom

Money sent, please let me know when you ship so that I can keep an eye out for it at work. Thanks again Tom.

tll74 04-07-2012 01:03 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by shawno72 (Post 5296266)
Money sent, please let me know when you ship so that I can keep an eye out for it at work. Thanks again Tom.

Shawn, it was shipped Friday via ups. Thanks, Tom

shawno72 04-07-2012 01:03 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by tll74 (Post 5299297)
Shawn, it was shipped Friday via ups. Thanks, Tom

Thank you Tom.

tll74 04-07-2012 01:06 PM

Re: Parting out 72 Suburban C10 402 TH400
 
The 72 K10 green 4x4 is completely parted out and I will be posting a new thread for it in the next couple of days. The white 72 2wd will done in a couple weeks. Thanks, Tom

nate_g_2003 04-10-2012 02:31 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Sorry to disappear for a few days. How much for the white/parchment belts and retractors, shipped to 77536?

Thanks.

tll74 04-11-2012 01:32 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by nate_g_2003 (Post 5305287)
Sorry to disappear for a few days. How much for the white/parchment belts and retractors, shipped to 77536?

Thanks.

11.50 shipping. Should fit in a flat rate box. Thanks, Tom

Gary 70 Jimmy 04-11-2012 03:38 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by tll74 (Post 5291405)
Gary, Heres a pic of the heat stove. I do not have the pipe. Looks very solid considering. I will be pulling it soon and acid dipping it. 60.00 shipped.
Thanks, Tom

I will take it if it looks good after you acid dip it.

sunk99 04-11-2012 10:49 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by tll74 (Post 5295235)
The LH fender and front markers are junk. The RH quarter front molding is sold. 49.00 shipped on the RH door latch and reverse lens.


Send me your zip for shipping cost.

Thanks, Tom

Ok I will take the reverse lense,and right front door latch and would you happen to have a front to rear tail light wiring harness? message me your paypal info please, thanks.

tll74 04-14-2012 12:21 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Out of town till next week at the Portland swap meet. Ill get back to all when i get home. Thanks, Tom
Posted via Mobile Device

Pmarti69 04-14-2012 08:14 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Tom,

How much for the TH400 with yoke and kickdown wiring and switch to 77345? Thanks Paul

Pmarti69 04-14-2012 03:49 PM

Re: Parting out 72 Suburban C10 402 TH400
 
Is the tranny still available and do you have the kickdown wiring and switch for it? Thanks Paul

Pmarti69 04-14-2012 03:56 PM

Re: Parting out 72 Suburban C10 402 TH400
 
apologize for double post

sunk99 04-14-2012 11:14 PM

Re: Parting out 72 Suburban C10 402 TH400
 
I will also take the fuel tank straps, dont need the rear wiring harness fixed mine.
Quote:

Originally Posted by sunk99 (Post 5308305)
Ok I will take the reverse lense,and right front door latch and would you happen to have a front to rear tail light wiring harness? message me your paypal info please, thanks.


Pmarti69 04-16-2012 07:44 AM

Re: Parting out 72 Suburban C10 402 TH400
 
PM sent

tll74 04-17-2012 02:01 AM

Re: Parting out 72 Suburban C10 402 TH400
 
Quote:

Originally Posted by Gary 70 Jimmy (Post 5306629)
I will take it if it looks good after you acid dip it.

I'll get off and dipped and report back.
Quote:

Originally Posted by sunk99 (Post 5314163)
I will also take the fuel tank straps, dont need the rear wiring harness fixed mine.

I'll get a new shipping cost with the added straps.
Quote:

Originally Posted by Pmarti69 (Post 5316633)
PM sent

PM sent back reguarding shipping.

Thanks, Tom


All times are GMT -4. The time now is 12:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com