The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 4 of 5

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)

- - "Wally" The 68 Service Truck (https://67-72chevytrucks.com/vboard/showthread.php?t=654857)

1stchevy

01-12-2015 03:06 AM

Re: "Wally" The 68 Service Truck

Quote:

Originally Posted by n2billet (Post 6998799)

Then I used a blower motor cover off a 67 Nova and bolted it to the ring to hide the wires. I heat shrieked the wires later to make them look a little cleaner.

Are you going to loom or tape the wires that run into the engine bay? If so what are you going to use?

n2billet

01-12-2015 07:09 AM

Re: "Wally" The 68 Service Truck

Quote:

Originally Posted by 1stchevy (Post 6999937)

Are you going to loom or tape the wires that run into the engine bay? If so what are you going to use?

I used heat shrink on all the wires and hid as much of them as I could, I will post a picture a little later.

1stchevy

01-12-2015 08:01 AM

Re: "Wally" The 68 Service Truck

Thanks Keith, I'm just curious because I'm getting ready to rewire my truck. Love your craftsmanship and attention to detail on these trucks.

98Murray

01-12-2015 08:09 PM

Re: "Wally" The 68 Service Truck

Wow! Thats a clean engine bay!

mcbassin

01-14-2015 03:49 PM

Re: "Wally" The 68 Service Truck

I've been following along on Instagram. Glad to see you posted up this thread. In for another killer build. I'm glad to see the LS platform powerplant too. It will be a pleasure for you to drive I'm sure.
Subscribed....

68 short step

01-14-2015 06:51 PM

Re: "Wally" The 68 Service Truck

nice a/c bulkhead idea.... ill add that one to the 'cool mod' list

trf63

01-14-2015 07:08 PM

Re: "Wally" The 68 Service Truck

nice progress.

kvn1011

01-20-2015 10:10 PM

Re: "Wally" The 68 Service Truck

holy smokes!!!
you never disappoint!!!

kvn1011

01-20-2015 10:12 PM

Re: "Wally" The 68 Service Truck

subscribed!

n2billet

01-20-2015 11:37 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Slowly going back together.

n2billet

01-20-2015 11:39 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Grille

n2billet

01-20-2015 11:42 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

A/C controls

n2billet

01-20-2015 11:46 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

A/C box installed.

n2billet

01-20-2015 11:50 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Extra pickup tube I made for the stock tank it goes next to the sending unit.

n2billet

01-20-2015 11:53 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Made the ring for the air intake.

n2billet

01-20-2015 11:54 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Ring welded to tube.

n2billet

01-20-2015 11:56 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Another view.

n2billet

01-20-2015 11:58 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Heater and a/c hoses made, painted and installed.

n2billet

01-20-2015 11:59 PM

Re: "Wally" The 68 Service Truck

1 Attachment(s)

Grille installed.

Malamute

01-21-2015 12:17 AM

Re: "Wally" The 68 Service Truck

Looking good!

mooseknuckles

01-21-2015 08:08 AM

Re: "Wally" The 68 Service Truck

Damn that's nice...

mcbassin

01-21-2015 02:14 PM

Re: "Wally" The 68 Service Truck

Very nice work on everything. Super clean work as always too. :metal:

BigMike608

01-22-2015 02:10 PM

Re: "Wally" The 68 Service Truck

sweet!

steelhorse

01-22-2015 03:42 PM

Re: "Wally" The 68 Service Truck

Nice looking truck. What A/C brackets are you using? Did you have to modify the frame?

mcbassin

01-22-2015 03:58 PM

Re: "Wally" The 68 Service Truck

Quote:

Originally Posted by steelhorse (Post 7014746)

Nice looking truck. What A/C brackets are you using? Did you have to modify the frame?

Keith, correct me if I'm, but it looks like you're using the stock compressor mounting location? HERE
I was curious what motor mounts you are using?

All times are GMT -4. The time now is 07:15 PM.

Page 4 of 5

Show 40 post(s) from this thread on one page