Re: 1984 C10 parting out*
 

Pic 1 - horns...could use some paint
Pic 2 - air intake dohickey for core support $5
Pic 3 - Outside mirror support braces...some surfact rust, could use paint
Pic 4 - dome light with harness and bulb
Pic 5 - close up of done light and harness plug

Re: 1984 C10 parting out*
 

Pic 1 - outside mirror chrome side...chrome great condition...comes with body gaskets and mounting hardware
Pic 2 - outside mirror glass side...glass good shape besides chip...glass has NO acid staining
Pic 3 - close up of chip on pass mirror
Pic 4 - radiator hold downs...mount in top of radiator support...comes with rubber bumpers on underside...could use some paint

Re: 1984 C10 parting out*
 

...

Re: 1984 C10 parting out*
 

just to mention that I recieved my parts today (through prioroty mail and everything was as described, packaged well, and this is the fastest delivery ive ever gotten. The communication with Chuck was superb and the service was wonderful and Id recommend doing business with this member anytime, and will definately ask him among the first should i need more parts . THANK YOU CHUCK!

Re: 1984 C10 parting out*
 

thanks Bob...I appreciate that...if I can do anything else, just let me know...

btw, I'll have pics up today of the cab...I took the tanks and motor and trans out today and while I had it up on the lift, I was going to take pics of the bottom of the cab for you, but I forgot...I can tell you that I didn't see any significant surface rust, I think there's more surface rust inside the cab actually...if you really need pics up under it, I'll jack it up in the yard and take some pics...I'll post pics of the inside floor tonight later or tomorrow sometime...

I'll also get pics up of the tanks at the same time as the cab floor...thanks fellas...

Re: 1984 C10 parting out*
 

Pics of the cab...the dark brown stuff in the driver's floorpan by the kick panel is just gunk I haven't cleaned up yet...the pics of under the cab are alittle brighter, I did that so you could see the pictures better where it was dark...thanks...

Re: 1984 C10 parting out*
 

Pic 1 - one more under cab pic
Pic 2 & 3 - front suspension...could use a scuff and paint
Pic 4 - steering box with fittings intact
Pic 5 - I think this is the proportioning valve

Re: 1984 C10 parting out*
 

Pic 1 & 2 - inner fenders...no rust
Pic 3 - 2 core radiator w/trans cooler
Pic 4 - factory front swaybar w/ mounts-stands, factory hardware and good rubber bushings...scuff and paint
Pic 5 - 4 headlight core support

Re: 1984 C10 parting out*
 

These are the tank pics...everything on the tanks works like factory...I haven't gotten the harness all the way out of the truck, but it's in excellent shape...they second pic is of the switching valve...the tank brackets are in great shape also...the crossover tubing for the tanks is also available...I haven't cleaned these up yet, but they will clean up nice...also, I didn't take pictures of the filler neck surround behind the fuel door, but I have them and the hardware and it's all in excellent shape...everything will be cleaned up before the buyer receives them...I just had a long day yesterday and had some stuff do to around the house today...also, it was below freezing outside and I really didn't want to be out there...:D

Re: 1984 C10 parting out*
 

What do you want for the short piece of steel lines that run over the top of the passenger frame rail?

Re: 1984 C10 parting out*
 

pm sent Joe

Re: 1984 C10 parting out*
 

I think it may be the lines at the bottom of this pic, under the switching valve.
http://67-72chevytrucks.com/vboard/a...1&d=1264981788

Re: 1984 C10 parting out*
 

I went out and got the lines and took a pic...have it up in a second

Re: 1984 C10 parting out*
 

ok here's the pic...is it the small lines or the long lines...like I said in the pm, 87bob has first dibs on any of this, but if he passes then you'll be next in line...thanks Joe

Re: 1984 C10 parting out*
 

It is the short ones.....
I'm not 100% sure those are like mine though, I'll have to look
thanks!

Re: 1984 C10 parting out*
 

looks like it's going to be $24 dollars through USPS insured

so that'll be $114 total to your door insured...thanks man...just let me know...

Chuck.

Re: 1984 C10 parting out*
 

Hi Chuck,

Wondering if you'll part with just the front steering linkage....basically I need the center link, but if it'll be easier to pull the outer/ inner tie rods, pitman arm, I'll do that.....shipping to 28031 or if you're headed to the Charlotte area or Myrtle Beach I could meet a somewhere??...Thanks Geoff

Re: 1984 C10 parting out*
 

let me see what I can do with getting it out alone...on May 8th, I'm going to Salisbury, NC for the Gathering of the Goofs for this site...I could bring it with me to that if that's not too far in the future for you...

I just checked and you should be less than an hour from Salisbury...you come swing by and come to the Gathering of the Goofs and get some grub too...

LOL...just checked the RSVP thread and you're on it...so you'll be there...if for some reason you don't make it, me and my family will be at the camp ground some of the day Sunday also before we head back home...

Re: 1984 C10 parting out*
 

That would work out great for me....I'm headed there too!!!:metal:
Let me know how much Chuck....you coming to Charlotte Auto Fair in April 8-11??

Re: 1984 C10 parting out*
 

nope...our little boy is due to be born at the end of March, so I probably won't be leaving town until the GOTG except to goto Charleston to show him off the family...that's great that your going too...I'm excited about it...we're getting there Friday night and going to rent a cabin Friday and Saturday night...

Re: 1984 C10 parting out*
 

Shamil, I sent your shift indicator out yesterday...sorry for the delay...thanks for the purchase

Chuck.

Re: 1984 C10 parting out*
 

is the switch valve in good shape? how much do you need for it?

Re: 1984 C10 parting out*
 

Ok here is what I need, can you give me a package and individual total and what is available:
Driveshaft
All the harware to mount the lights to the core support
Engine compartment wiring harness
Gauge bezel
Outside door locks
I am in Augusta, GA so I won't need shipping

Re: 1984 C10 parting out*
 

if you're talking about the switch valve for the dual tanks, then 87bob had first dibs on it...He's supposed to be paying me this weekend for it, if he backs out, then it's yours for $15 plus shipping...he's been pretty intent on getting it, so I'm pretty sure he's going to be buying it...;)

Re: 1984 C10 parting out*
 

Driveshaft - I have still - $25

hardware for lights - I don't know exactly you want...I have the springs and the buckets that the lights mount into...the adjustment screws were toast, but they're only $2 and change for a pair of them...if there's something I'm missing let me know...$20 for springs and the mounting buckets

Engine harness - I still have - $30 - this mounts to the backside of the fusebox

headlight harness - I still have - $25

gauge bezel - I still have - $30 - this is for an A/C truck and it hasn't been cut for a cd player and has been painted silver

outside door locks - $15 - this includes two factory GM keys

Total $125 - package deal 10% off $112

let me know what you want...this stuff is going pretty fast...thanks man

Chuck.