Re: Suburban K20 1986 Silverado
 

thanks man! thats what I fugured!

Re: Suburban K20 1986 Silverado
 

a buddy of mine offered to put the Burb in his garage during painting! very cool of him.

since I am inside I figured i do some more stuff
repaired a hole in the rear fender.
repaired some rust and holes in the cargo door

and making some progress

it now has 4 layers of white on top. finally no red coming through.
I have one coat of black on and need one more. the black covers like the best. allmost in one coat.


https://lh6.googleusercontent.com/-A...0/IMAG0626.jpg

https://lh5.googleusercontent.com/-J...2/IMAG0624.jpg

https://lh4.googleusercontent.com/-5...2/IMAG0623.jpg

https://lh5.googleusercontent.com/-0...2/IMAG0622.jpg

https://lh3.googleusercontent.com/-u...0/IMAG0619.jpg

https://lh4.googleusercontent.com/-n...2/IMAG0612.jpg

https://lh3.googleusercontent.com/-2...2/IMAG0641.jpg
https://lh4.googleusercontent.com/-V...2/IMAG0640.jpg

I need to take the rear bumper off to paint the red thing between the bumper and the chassis.

https://lh4.googleusercontent.com/-U...2/IMAG0637.jpg

https://lh6.googleusercontent.com/-m...0/IMAG0636.jpg

it looks kinda nice without the running boards. I might not put them back on.

I do need a step of some kind so grandma can get in the car. any ideas?

Re: Suburban K20 1986 Silverado
 

thats cool
sure looks white on top now
black looks good too

Re: Suburban K20 1986 Silverado
 

outside is finished!

https://lh6.googleusercontent.com/-k...0/IMAG0644.jpg

https://lh3.googleusercontent.com/-E...0/IMAG0645.jpg

Re: Suburban K20 1986 Silverado
 

Looks really good!

Re: Suburban K20 1986 Silverado
 

thanks man!
yeah, came out pretty nice!

Re: Suburban K20 1986 Silverado
 

hopefully fixed a leaking radiatorconnection by putting some good old JB Weld on there. first of course cleaned it very thoroughly...

https://lh4.googleusercontent.com/-4...2/IMAG0655.jpg
https://lh5.googleusercontent.com/-c...0/IMAG0654.jpg
https://lh6.googleusercontent.com/-b...0/IMAG0653.jpg
https://lh3.googleusercontent.com/-m...2/IMAG0652.jpg

Re: Suburban K20 1986 Silverado
 

damnit! I let the JB Weld dry overnight 20:00 till 8:30h in the morning, but it started leaking again today.

So I have let it dry for 12,5hours, but that is probably not enough......

I'll fix it again tonight and let it sit for 36hours. hopefully its solved then...because I would hate to take the complete rad out, because I think the tranny cooler is also in there.

is it hard to disconnect and then reconnect the tranny cooler?

Re: Suburban K20 1986 Silverado
 

looks good finished !

Re: Suburban K20 1986 Silverado
 

it dosn't look like there is an external cooler(usally out front of regular rad)
no pressure when not running
so just the two lines (yellow)undo
and i baggie the ends so they don't drip and just a strip of duck tape over the tranny fittings on the rad to lift it out
when i've used the JB i've found more thinner coats work better
but havn't used it on a rad

Re: Suburban K20 1986 Silverado
 

thanks man! I applied JB again yesterday and I am now letting it rest for 36h before starting the engine again. If it doesnt work, then I will probably take the rad out and solder it outside the engine bay

Re: Suburban K20 1986 Silverado
 

How good does the paint job look up close? It looks great in the pictures!

Re: Suburban K20 1986 Silverado
 

Looks great! Needs some black wheels now.;)

Re: Suburban K20 1986 Silverado
 

thanks man!

it has some orangepeel, but I kinda like it like that. rough car, rough paint...

@Bruiser: yeah, when the chrome runs out on these boys, I'll have m powdercoated black...that will look sweet!

Re: Suburban K20 1986 Silverado
 

Nice photo today at the beach in Scheveningen, Netherlands!

https://lh3.googleusercontent.com/-t...eningen_01.jpg

Re: Suburban K20 1986 Silverado
 

I changed the original radiator for a Spectra Prenium CU730...

was a b1tch to fit, what should be a bolt-in-replacement, became a supercustom-replacement...the rad was thicker and high then the original...

Rubbers didnt fit, top radiator brackets didnt fit...etc.....

https://lh4.googleusercontent.com/-M...DSC03027_1.JPG

https://lh3.googleusercontent.com/-b...DSC03026_1.JPG

Re: Suburban K20 1986 Silverado
 

Nice looking truck paint and radiator look good!

Re: Suburban K20 1986 Silverado
 

yup looks good should work well

Re: Suburban K20 1986 Silverado
 

took the eco-module of the firewall today. I also tried to remove a lot of the smog wiring, because all the smog stuff is gone. But they all run to the back of the engine and I cant see where they go. Can I just cut these babys?

all the connectors are (when facing the engine bay from the front) to the left of the engine and run to the left rear side into a wire protection plastic hose...

Re: Suburban K20 1986 Silverado
 

I replaced the seal of the valve covers and gave them a paintjob.

https://lh3.googleusercontent.com/-I...pdeksel_14.jpg
https://lh4.googleusercontent.com/-r...pdeksel_01.jpg
https://lh4.googleusercontent.com/--...pdeksel_05.jpg

and finally mounted the sunvisor on the Burb

https://lh4.googleusercontent.com/-V...0/DSC03900.JPG
https://lh6.googleusercontent.com/-r...0/DSC03899.JPG
https://lh6.googleusercontent.com/-F...0/DSC03898.JPG

Re: Suburban K20 1986 Silverado
 

This has been a very interesting thread. I like that tach on the left, the led's in the guages. Visor makes a big difference. The new radiator is very nice looking. Did the truck come with those dual batteries? Was this truck orginally a diesel? I will be roller painting the bottom half of my truck when the time comes.

Re: Suburban K20 1986 Silverado
 

thanks man! No I have no clue why it has dual batteries. I bought it like that and changed both old batteries for new ones. I guess the previous owner was a big user (hahaha)....

Re: Suburban K20 1986 Silverado
 

My 86 gas also came with dual batteries, it was an option. The paint looks very nice. i was thinking about doing mine black in the middle w/a roller.

http://i62.photobucket.com/albums/h1...rubi03/028.jpg

Re: Suburban K20 1986 Silverado
 

visor looks great i may do mine yet
Vcovers look nice and new again

Re: Suburban K20 1986 Silverado
 

Installed a second hand Analog MSD 6AL (6420) in my car last night.

cars runs fine. I am not sure if I am noticing any difference from the stock setup with the HEI ignition.

I'll check my mpg this week and see if it helps any...