The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   85 crew cab with 97 vortex motor and dash (https://67-72chevytrucks.com/vboard/showthread.php?t=444509)

justpball 01-26-2012 07:36 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Nice bro!
Posted via Mobile Device

68 TT 01-27-2012 02:26 AM

Re: 85 crew cab with 97 vortex motor and dash
 
2 Attachment(s)
The design of the motor mount adapters all come down to the headers you are going to use and if you want to use the stock trans or the new trans in the stock bell housing location.

These ones leave the trans in the stock location so if you want to keep your stock trans & driveshaft(s) you can.

http://www.streetsideauto.com/p/tran...ap-mount-4575/

I don't know which headers are designed around this if any. I'm going to make my own using a set of big block headers and a set of Patriot H7893 LSx header flanges.

http://www.jegs.com/i/Patriot+Exhaus...H7893/10002/-1

(541)COLD_beer 03-22-2012 09:08 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Quote:

Originally Posted by 68 TT (Post 5148629)
The design of the motor mount adapters all come down to the headers you are going to use and if you want to use the stock trans or the new trans in the stock bell housing location.

These ones leave the trans in the stock location so if you want to keep your stock trans & driveshaft(s) you can.

http://www.streetsideauto.com/p/tran...ap-mount-4575/

I don't know which headers are designed around this if any. I'm going to make my own using a set of big block headers and a set of Patriot H7893 LSx header flanges.

http://www.jegs.com/i/Patriot+Exhaus...H7893/10002/-1

thanks for that info.

(541)COLD_beer 03-22-2012 09:10 PM

07 crew cab
 
Spring is here!!!! time to get my A## into gear

(541)COLD_beer 03-23-2012 09:11 PM

Re: 85 crew cab with 97 vortex motor and dash
 
3 Attachment(s)
pulled the 97 motor and tranny out... And yes it was sketchy! I wish i had a shop!!!!!!!!!!!

Attachment 895801

Attachment 895802

Attachment 895803

(541)COLD_beer 03-23-2012 09:25 PM

Re: 85 crew cab with 97 vortex motor and dash
 
1 Attachment(s)
here is the all aluminum 5.3 motor

Attachment 895811

(541)COLD_beer 03-23-2012 09:37 PM

Re: 85 crew cab with 97 vortex motor and dash
 
1 Attachment(s)
my small messy garage...

Attachment 895825

68 TT 03-23-2012 10:06 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Nice to see some progress.

I am in the same boat with no shop and only a small shed to keep my tools & parts in. Makes projects more entertaining.

(541)COLD_beer 03-23-2012 10:41 PM

Re: 85 crew cab with 97 vortex motor and dash
 
3 Attachment(s)
i hate it i wish i would have held out for a house with a shop already on it. oh well.

here are some dash pics. its all fitted, now i just need to make tabs to hold her in place. I had the heater box in as well. I had to cut a lot out of the fire wall, i'll get better pics later.

(541)COLD_beer 03-23-2012 10:49 PM

Re: 85 crew cab with 97 vortex motor and dash
 
2 Attachment(s)
fire wall

(541)COLD_beer 03-23-2012 11:05 PM

Re: 85 crew cab with 97 vortex motor and dash
 
P.O.S. computer wont let me upload the pics i want, i'll have to retake them later

68 TT 03-24-2012 12:40 AM

Re: 85 crew cab with 97 vortex motor and dash
 
Quote:

Originally Posted by (541)COLD_beer (Post 5271105)
i hate it i wish i would have held out for a house with a shop already on it. oh well...

Same here. I got in a hurry searching for a new place and settled for something not quite what I wanted just to get my girls out of a bad neighborhood and into a better school district. Won't happen the next time.

Devillusion 03-24-2012 08:57 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Looking good....


Question: What size lift, tires, and wheels are you running. Looks like a nice setup.

(541)COLD_beer 03-24-2012 09:04 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Thanks! I was going to work on her to day but its too cold out. Many tomorrow

It has a 6" lift with 35" tires on 20" wheels
Posted via Mobile Device

Devillusion 03-24-2012 11:42 PM

Re: 85 crew cab with 97 vortex motor and dash
 
They must be 12" wide and 15.50's?

(541)COLD_beer 03-28-2012 12:16 AM

Re: 85 crew cab with 97 vortex motor and dash
 
Quote:

Originally Posted by Devillusion (Post 5273099)
They must be 12" wide and 15.50's?

13.50s on 10'' wheels... not sure on the offset?

Devillusion 03-28-2012 12:24 AM

Re: 85 crew cab with 97 vortex motor and dash
 
Quote:

Originally Posted by (541)COLD_beer (Post 5279474)
13.50s on 10'' wheels... not sure on the offset?

hmmmm, deceiving.....looks good. Will have to keep that in mind when I tie into my other build.

(541)COLD_beer 03-28-2012 12:31 AM

Re: 85 crew cab with 97 vortex motor and dash
 
It has a dully axle. I think its about 2" wider then srw axles and I have spacers in the front to match the rear
Posted via Mobile Device

Devillusion 03-28-2012 12:33 AM

Re: 85 crew cab with 97 vortex motor and dash
 
Tires just look wider than a 10"/13.50 is all....

jkade 10-03-2012 10:52 AM

Re: 85 crew cab with 97 vortex motor and dash
 
update????

Mr. 250r 10-04-2012 04:12 AM

Re: 85 crew cab with 97 vortex motor and dash
 
1 Attachment(s)
Only one other square body crew cab pre runner i've seen... and its awesome although i cringe at the 4wd to 2wd idea lol nice build though

(541)COLD_beer 10-16-2012 08:11 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Quote:

Originally Posted by jkade (Post 5626741)
update????

Not really... I've been working a lot. I've done a few things here and there, it sucks because its constantly on my mind I just want her done! I'll just keep picking at it as much as i can. I'll post updates as soon as I have something worth posting.

Thanks for the interest though.

ahsom79vette 01-08-2013 07:58 AM

Re: 85 crew cab with 97 vortex motor and dash
 
Any leftover Avalanche parts for my Longhorn? Like seats, etc...

Pulse_GTO 02-20-2013 01:40 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Any updates on the dash?

shifty1125 03-05-2013 03:31 PM

Re: 85 crew cab with 97 vortex motor and dash
 
Great build. Im wanting to do the same thing. Im getting a crew cab dually this weekend
Im def gonna try this swap on day on it
Posted via Mobile Device


All times are GMT -4. The time now is 04:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com