Re: 68' Chevy c10
That's cool you're able to document the engine build process!
|
Re: 68' Chevy c10
nice engine, smooth
|
Re: 68' Chevy c10
Quote:
Quote:
|
Re: 68' Chevy c10
3 Attachment(s)
Some more parts done.
Attachment 798940 Attachment 798941 Decided to add a little more detail to the fan clutch. Does'nt look new, but I think it looks good. Attachment 798942:chevy: |
Re: 68' Chevy c10
5 Attachment(s)
More done on the engine.:metal:
Attachment 799091 Attachment 799092 Attachment 799093 Attachment 799094 Here's the guy putting my engine together. It's Mr. Haney from Green Acres cousin.:lol: But seriously Thanks man your doing an awesome job! Attachment 799095 |
Re: 68' Chevy c10
3 Attachment(s)
And more.
Attachment 799098 We couldn't resist setting the intake on just to see how it looked. Attachment 799099 Attachment 799100:chevy: |
Re: 68' Chevy c10
Looking great!
|
Re: 68' Chevy c10
lookin good!
|
Re: 68' Chevy c10
2 Attachment(s)
Quote:
Quote:
Attachment 799332 this is the spid from the 67' I took the 327 out of. Attachment 799333:chevy: |
Re: 68' Chevy c10
1 Attachment(s)
oops that pic was bad.:lol:
Attachment 799334:chevy: |
Re: 68' Chevy c10
Looking good !!! Keep at it!
|
Re: 68' Chevy c10
Enjoy your build, your doing great work.
|
Re: 68' Chevy c10
Did you ever find the correct bracket for that booster you got? I've got the same issue with a later model booster (6 hole bracket) going on my '67.
|
Re: 68' Chevy c10
Quote:
|
Re: 68' Chevy c10
Ya, after some closer looking and a little more searching on here, late model boosters are a bust for our trucks. I did find a thread where a guy modified one, but it sure seems like a lot of work vs. just getting the one that will bolt on.
Search - Late model power brake booster upgrade I was at the local pick-n-pull today getting the rotors/calipers for my truck and thought I'd grab the booster and prop valve while I was at it. I should have looked a little closer first. I'm out $14, but the worst part was the hornet nest I stirred up. They were mighty angry that I was in there, but I was determined and took it three times before I got the damn thing out! Oh, well - another lesson learned the hard way. Thanks for the feedback on this and good luck with your sweet project! |
Re: 68' Chevy c10
Thanks jlsanborn, getting the correct booster is the way to go. one less problem to deal with. good luck with your project. oh and sorry to hear about the wasps, been there done that. :chevy:
|
Re: 68' Chevy c10
2 Attachment(s)
|
Re: 68' Chevy c10
Nice work! Looks like new! Details like that really make the difference on how nice a truck looks!!!
|
Re: 68' Chevy c10
5 Attachment(s)
Quote:
I didn't get much done today. here's a couple pics. Attachment 800450 Attachment 800451 Attachment 800452 Got the low hump cut out:metal: Attachment 800453 Still have to blast these, and paint 'em black. Attachment 800454 |
Re: 68' Chevy c10
good work on the fuel filler!!!
|
Re: 68' Chevy c10
Thanks VA72C10, My welding skills are gettin better. At least it's solid.
Won't need much filler either:cool: |
Re: 68' Chevy c10
2 Attachment(s)
Filled, sanded, and filled again. after another round of sanding it should be ready for primer.:D
Attachment 800771 almost done! :mm: Attachment 800772 |
Re: 68' Chevy c10
3 Attachment(s)
went ahead and finished filler hole.
Attachment 800806 Attachment 800807 and put the fan back together. Attachment 800808:chevy: |
Re: 68' Chevy c10
Im not much for clutch fans but that one looks sweet!
|
Re: 68' Chevy c10
Very nice! Patch is now gone :D
And the engine and fan look really nice! |
All times are GMT -4. The time now is 12:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com