Originally Posted by bondo510 (Post 6232364)

I need radio section and about 3 inch around it . I will just splice it in . I also need the drivers lower skin panel in between door and rear wheel. I wish you were closer I need 5 lug rear axle and front disc , Your wagon looks sad behind it ,

Originally Posted by Steve Cole (Post 6233191)

That's OK, I'm hoping you will price accordingly. ;) Can you send me pics, price and measurements of the center seat? I am assuming that it folds down to make an armrest? Thanks.

Originally Posted by Number98 (Post 6233474)

So if you could cut these sections out coming up as high as possible and as much of the inner panels to go with them as well and a little under the tail lights as you wrap around the rear. I hope I am making sense... :lol:

Originally Posted by 1leglance (Post 6239851)

I am looking for the drivers side channel between the roll up glass and stationary glass in the non-door behind the driver.
Price and shipping to 85008
thanks
Lance
I only need the drivers side metal channel but I put an arrow to the passenger side one also as reference

https://lh5.googleusercontent.com/-P...r+window-1.jpg

Originally Posted by Mister-B (Post 6243995)

Do you know if the bumper will fit a 69 3/4 ton fleet side? I assume your price includes the mounting brackets and the license plate mount?
Posted via Mobile Device

Originally Posted by GuyO (Post 6245061)

Do you have the GMC Tailgate emblem??

Originally Posted by puppyluppy (Post 6245352)

I need the filler neck assembly if you still have it? Thom Phillips, Macon GA 478 951-8466 phone or text or reply here. Thank you soo much.

Originally Posted by Dale99 (Post 6245488)

AS anyone heard from the OP? I sent payment on the 21st, sent pm on 27th asking if he had shipped my parts. Its the 30th and I have no parts. I see he has been online the past 2 mornings. Has parts requests here and zero responses. :crazy:

Originally Posted by 70sarver (Post 6245764)

Same here payment sent on 20th and I had not heard from anyone since.

Originally Posted by mcbassin (Post 6262347)

Thanks,
I didn't take the time to look through the whole thread to see if anyone had asked or said they would take them. I apologize if it appeared I tried to jump in front of you. Let's wait and see if he responds.

Originally Posted by budnikguy (Post 6262836)

Next in line for them...these are the suburban sport bumper brackets, 2 brackets as opposed to 4 for the trucks.....and of course coil spring rearends...

Originally Posted by mcbassin (Post 6262844)

So I would still need the inboard brackets for a truck? What about rock shields? Any pictures? thanks

Originally Posted by budnikguy (Post 6262808)

I purchased a Plasma Cutter and have been practicing a bit....let me see if I get comfortable with this, or just sawzall it...I will know by the end of the weekend...

Originally Posted by DBear (Post 6277026)

I need the rear lower stuff that "Number98" was asking about. I need the following:

Lower rear sections behind rear wheel wells.
lower sections in front of rear wheel wells.

If not sold, I will defineately be a buyer on them.

Originally Posted by jks67ss396 (Post 6277126)

Hi

Did you ever sell the wiper washer switch? If not, im interested... zip is 92832 (or if youre ever in Orange county, ill meet you)
thanks!