The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 4 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CA Cabs Need any cuts, parts etc?! (https://67-72chevytrucks.com/vboard/showthread.php?t=599155)

Undone

10-20-2013 07:32 PM

Re: Cabs Need any cuts, parts etc?!

1 Attachment(s)

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

7dee2

10-23-2013 11:41 AM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by budnikguy (Post 6322068)

aftamathe86 - your lo hump patch is cut, boxed, and will get it to the PO tomorrow or Monday.

kaphillips- your divider trim, clips, and gas cap are boxed and will get it to the PO tomorrow or Monday.

*Gregg*- Payment received. I will get the firewall pieces cut for you this weekend and have them packaged and shipped asap.

7dee2- your "RV" fill in pieces have been cut, scouring for a box big and sturdy enough to take down to Greyhound for the shipping cost quote.

sduckworth13- Payment received. I will get the floor patch cut for you this weekend and have them packaged and shipped asap.

Adam, Any news on my Greyhound quote?

Thanks,

Sanchez Garage

10-23-2013 11:03 PM

Re: Cabs Need any cuts, parts etc?!

any frames? fenders ?Were in Riverside-- I am off Vanburren/canyon ridge

budnikguy

10-23-2013 11:14 PM

Re: Cabs Need any cuts, parts etc?!

We are practically neighbors...i am on Roberts near Dauchy. I can help you with all of that.

Adam

budnikguy

10-23-2013 11:16 PM

Re: Cabs Need any cuts, parts etc?!

working on making a box...the back side of the cab is an odd size to try and find......

Quote:

Originally Posted by 7dee2 (Post 6329175)

Adam, Any news on my Greyhound quote?

Thanks,

budnikguy

10-23-2013 11:16 PM

Re: Cabs Need any cuts, parts etc?!

$50 delivered....

Quote:

Originally Posted by Undone (Post 6324913)

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

ksucatz

10-23-2013 11:55 PM

Re: Cabs Need any cuts, parts etc?!

How is the roof/gutter areas? I have some rust that I need to take care of. I haven't removed all the old seam sealer yet to see the extent but know there are at least a couple holes. Might need some windshield pinch areas too.

MudBug

10-24-2013 11:30 AM

Re: Cabs Need any cuts, parts etc?!

How much of the firewall is left? I'm looking for the door post foward.:metal:

Youey

10-24-2013 12:55 PM

Re: Cabs Need any cuts, parts etc?!

Looking for top half of firewall where the pinch weld is makes a little
Chase for the wiring to go through I think the cowl gasket goes there for the hood. How much would it cost of that. If you need a picture ill get one

Hard_Rain420

10-25-2013 10:59 AM

Re: Cabs Need any cuts, parts etc?!

Here's some panels I need shipped to 32906. I can wait in line if you have other cabs available in the future.

http://DSC00294
http://DSC00295
http://DSC00296
http://DSC00297
http://DSC00298
http://DSC00299
http://DSC00300

Evaded

10-25-2013 03:42 PM

Re: Cabs Need any cuts, parts etc?!

still was needing passenger non rusty cab corner, you never lmk...

budnikguy

10-25-2013 03:47 PM

Re: Cabs Need any cuts, parts etc?!

Sure i could help you there...lmk what exact areas you need

Quote:

Originally Posted by ksucatz (Post 6330368)

budnikguy

10-25-2013 03:48 PM

Re: Cabs Need any cuts, parts etc?!

Cutting tomorrow, I will let you know what is left shortly there after

Quote:

Originally Posted by MudBug (Post 6330898)

How much of the firewall is left? I'm looking for the door post foward.:metal:

budnikguy

10-25-2013 03:53 PM

Re: Cabs Need any cuts, parts etc?!

Sure i can help you with that, please post detailed pics of what you need.

Quote:

Originally Posted by Youey (Post 6330981)

budnikguy

10-25-2013 03:54 PM

Re: Cabs Need any cuts, parts etc?!

Still working on cuts..should get caught up this Sat-Mon...

Quote:

Originally Posted by Evaded (Post 6332531)

still was needing passenger non rusty cab corner, you never lmk...

Undone

10-25-2013 07:24 PM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by budnikguy (Post 6330327)

$50 delivered....

I'll take it, PM payment info.

kasketrider

10-26-2013 12:23 AM

Re: Cabs Need any cuts, parts etc?!

is the dash available? If so how much do you need for it I can pick it up and pay cash in person.

budnikguy

10-26-2013 03:58 PM

Re: Cabs Need any cuts, parts etc?!

Dash is available, matter of fact, if you are wanting a non a/c dash I already have a clean one removed and ready to go...

Adam
951-544-0721

Quote:

Originally Posted by kasketrider (Post 6333239)

is the dash available? If so how much do you need for it I can pick it up and pay cash in person.

7dee2

10-27-2013 02:16 PM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by 7dee2 (Post 6329175)

Adam, Any news on my Greyhound quote?

Thanks,

Adam, How's my Greyhound shipment coming?

Thanks,

budnikguy

10-28-2013 11:32 PM

Re: Cabs Need any cuts, parts etc?!

Got rained out before I could get it packaged. I am going to try and take Thursday to catch up.

Quote:

Originally Posted by 7dee2 (Post 6335193)

Adam, How's my Greyhound shipment coming?

Thanks,

7dee2

10-29-2013 11:47 AM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by budnikguy (Post 6337657)

Got rained out before I could get it packaged. I am going to try and take Thursday to catch up.

K LMK..

Thanks,

budnikguy

11-01-2013 03:36 PM

Re: Cabs Need any cuts, parts etc?!

Pm'd you the Greyhound shipping cost....

Quote:

Originally Posted by 7dee2 (Post 6338192)

K LMK..

Thanks,

7dee2

11-02-2013 04:35 PM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by budnikguy (Post 6343192)

Pm'd you the Greyhound shipping cost....

Paid via Paypal. LMK when your going to drop off it at Greyhound. Thank you Adam can't wait!! :metal:

Thanks,

Youey

11-02-2013 06:57 PM

Re: Cabs Need any cuts, parts etc?!

1 Attachment(s)

Attachment 1170019

Do you have this section left? Can you send me a price on it if still available

Undone

11-06-2013 09:46 PM

Re: Cabs Need any cuts, parts etc?!

Quote:

Originally Posted by Undone (Post 6324913)

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

Did this get cut and shipped?

All times are GMT -4. The time now is 07:03 AM.

Page 4 of 6

Show 40 post(s) from this thread on one page