The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   AZ Parting out 85 Chevy Silverado (https://67-72chevytrucks.com/vboard/showthread.php?t=614540)

1774btcrew 03-16-2014 03:28 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by cleansquare (Post 6577664)
I need the little spring or ehatever it is that the transmission shift linkage pivots on in that little cup bolted to the frame before going into the fork linkage thing on the trans.

Also need one of those hood rubber stopper things on either side of the core support.
I don't know if the transmission linkage is still in it or not. I will look tomorrow. As far as the hood piece I can just give it to you. I am pretty sure it is still there

jbristo67 03-16-2014 09:09 PM
Re: Parting out 85 Chevy Silverado
 
yeah let me know

nortryder 03-21-2014 06:35 PM
Re: Parting out 85 Chevy Silverado
 
Hi
Any furl tank hangers?
Mike

beamn7 03-23-2014 07:42 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by 1774btcrew (Post 6572237)
Jesse, I will be in Temecula next week. Is that remotely close to you? I will send you a PM with my email address.
Never got PM. Still interested in the control arms.... Let me know bud. Thanks

hatzie 03-24-2014 10:01 AM
Re: Parting out 85 Chevy Silverado
 
Dual tank sub-harness?

All three pieces.
  1. Dash switch to the firewall connector including the complete ground and power wires inside the cab.
  2. Firewall connector to valve and valve to senders.
  3. Sender wire on the frame rail disconnect to the Packard 56 male in the bulkhead plug.

COOP3726 04-04-2014 11:15 AM
Re: Parting out 85 Chevy Silverado
 
I want door panels if price is right. Shipping to 30263

1774btcrew 04-04-2014 01:30 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by COOP3726 (Post 6611543)
I want door panels if price is right. Shipping to 30263
The door panels aren't in good enough shape to justify shipping. Thanks for your interest though

1774btcrew 04-04-2014 01:31 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by hatzie (Post 6591576)
Dual tank sub-harness?

All three pieces.
  1. Dash switch to the firewall connector including the complete ground and power wires inside the cab.
  2. Firewall connector to valve and valve to senders.
  3. Sender wire on the frame rail disconnect to the Packard 56 male in the bulkhead plug.
So much of the harness was butchered by the previous owner that wanted to put the steering column in a street rod it is unlikely it is any good or intact. Sorry I couldn't help out.

1774btcrew 04-04-2014 01:32 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by beamn7 (Post 6590745)
Never got PM. Still interested in the control arms.... Let me know bud. Thanks
I did make it out to Temecula but it was crazy trip. Sorry we couldn't get together on the A arms

1774btcrew 04-04-2014 01:33 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by nortryder (Post 6587631)
Hi
Any furl tank hangers?
Mike
Mike sorry for the delay. I was out of town for business when you posted here. I do have the fuel tank hangers but they are out getting powder coated right now. I figured they would be an easier sell nice and clean ready to install.

1774btcrew 04-04-2014 01:34 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by jbristo67 (Post 6579011)
yeah let me know
There isn't any of the transmission linkage. Sorry

nortryder 04-04-2014 04:21 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by 1774btcrew (Post 6611743)
Mike sorry for the delay. I was out of town for business when you posted here. I do have the fuel tank hangers but they are out getting powder coated right now. I figured they would be an easier sell nice and clean ready to install.
No problem.
How much to 05468?
Mike

killerpanel 04-05-2014 04:56 PM
Re: Parting out 85 Chevy Silverado
 
I need upper, lower arms and the spindles.

beamn7 04-07-2014 01:10 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by 1774btcrew (Post 6611741)
I did make it out to Temecula but it was crazy trip. Sorry we couldn't get together on the A arms
No worries. Still interested if you want to ship to 92595 or I may be able to be out that way in the coming weeks. Let me know. Thanks.

1774btcrew 04-16-2014 11:42 AM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by beamn7 (Post 6616944)
No worries. Still interested if you want to ship to 92595 or I may be able to be out that way in the coming weeks. Let me know. Thanks.
Jesse, These are now off the truck. I think shipping would be really expensive on these. If there is anyway you can pick them up I would do $20 each. I am going to get my neighbor to vat them so they are nice and clean. I don't like selling dirty stuff.

beamn7 04-19-2014 01:17 AM
Re: Parting out 85 Chevy Silverado
 
Sorry for the delay bud. Was in Indy this week for work. I'll take 'em. I'll PM you when I can schedule a trip over there. Wont be long. Thanks man!

yellowGT 04-23-2014 02:45 AM
Re: Parting out 85 Chevy Silverado
 
Is the grill still available?

1774btcrew 04-23-2014 10:42 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by yellowGT (Post 6642068)
Is the grill still available?
The grille isn't actually any good. The trim is good but the rest isn't

1774btcrew 04-23-2014 10:46 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by beamn7 (Post 6635773)
Sorry for the delay bud. Was in Indy this week for work. I'll take 'em. I'll PM you when I can schedule a trip over there. Wont be long. Thanks man!
Just wanted to let you know I am having the control arms vatted at my neighbors machine shop so they are nice and clean for you when you come out here.

1774btcrew 04-23-2014 10:47 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by killerpanel (Post 6613502)
I need upper, lower arms and the spindles.
I would think these would be way to heavy to justify shipping all the way to NY

RM956 04-29-2014 12:39 AM
Re: Parting out 85 Chevy Silverado
 
Are the vent windows in good condition? Im interested if so.

1774btcrew 04-29-2014 12:47 AM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by RM956 (Post 6651243)
Are the vent windows in good condition? Im interested if so.
I will send you a PM with my email address. I will have to take a good look at them on Wednesday as the truck isn't at my house.

zellway 04-29-2014 12:35 PM
Re: Parting out 85 Chevy Silverado
 
If not sold what would you ask for both doors complete, Local pick up?

1774btcrew 04-29-2014 02:52 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by zellway (Post 6651799)
If not sold what would you ask for both doors complete, Local pick up?
I would do $100 each with no door panels picked up. Have a couple people interested in misc pieces on them.

1774btcrew 05-01-2014 12:32 PM
Re: Parting out 85 Chevy Silverado
 
Quote:
Originally Posted by RM956 (Post 6651243)
Are the vent windows in good condition? Im interested if so.
I took pictures of the vent windows yesterday. I will email you.


All times are GMT -4. The time now is 11:39 PM.
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com