Re: Minnesota Daily Driver
 

Helped a fellow car guy get his new project home today.

Re: Minnesota Daily Driver
 

Looking tough. How's it tow with the lift and lift springs in the rear?

Re: Minnesota Daily Driver
 

Tows pretty good. The trailer is well balanced.

Re: Minnesota Daily Driver
 

Just did a 300+ mile trip to pick up an engine for another project. The old rig performed well. Forgot to take pics.

With the last few months of driving in warm and cold I I've found the electric choke to be a good improvement over the divorced.

Also noticed once I started using the heater that there was a a lot of air coming from the dash vents with floor selected. Turns out the plastic bracket the connects the vacuum actuator arm to the mode door broke. When the dash vents were selected it would pull the door fine but when floor was selected it wouldn't push the door closed. I was able to find the bracket online. Heater is working good now.

The only other update is the what looks to be the original steering box started leaking. So there's now a rebuilt box installed.

Re: Minnesota Daily Driver
 

Here's an action pic from last winter plowing one of the few snows we got.

Re: Minnesota Daily Driver
 

Here's one of both my squares parked nose to nose this summer.

Re: Minnesota Daily Driver
 

Looking good! Did you have to do anything to your plow mount to work with that lift? What's the story on your '87? Looks pretty tall.

Re: Minnesota Daily Driver
 

After the 4" lift the plow blade would easily trip. I like the clearance I had on the truck side from the plow mount to the ground so I didn't want to lower that. I ended up making some blocks that moved the pin holes up on the "A" frame 4". So now the "A" frame is parallel to the ground. So far it's been working well that way.

The '87 has 6" of lift and 33x12.5x15 tires. It's a hop to get up in the seat.

Re: Minnesota Daily Driver
 

That makes sense. Few rungs down on the chain and the lift cylinder doesn't know.

Re: Minnesota Daily Driver
 

Couple of interior updates. I added boat grab handles.

Re: Minnesota Daily Driver
 

Also swapped the steering wheel for one out of a late '80s/ early '90s. I think it gives a bit more room.

Re: Minnesota Daily Driver
 

Looks good. I like the handles. The wife unit would be very happy with a couple of those.

I think you are right, our plow controls look identical.

Re: Minnesota Daily Driver
 

I like the handles because they give you something else to grab on the drivers side. I made a habit of not grabbing the wheel as it's hard on the column so it was kind of a trick to hop in before the handles.

Re: Minnesota Daily Driver
 

Back to the build.

After fitting the doors it was time to install the rubber floor liner.

Re: Minnesota Daily Driver
 

Then I threw the seat it and started gathering parts to bring it to the body shop.

Re: Minnesota Daily Driver
 

Solid work. Does Warn make the front receiver hitch you are using? You are answering all kinds of questions for me.

Re: Minnesota Daily Driver
 

Thanks, Happy to help.

For the front receiver I bought a generic approximately 6" long 2" receiver tube and welded it to the plow frame. It put it just below the bumper and is plenty out of the way for the plow components.

Re: Minnesota Daily Driver
 

Hello from Isanti,

This is great work, I'm waiting for a good snow to get my square out to plow for the first time. It has a 4" lift and I have not modified any of the A frame brackets, I hope it's not tippy.

Re: Minnesota Daily Driver
 

Thanks. Yeah not much snow yet. If your plowing fresh snow the blade shouldn't be too tippy. It's worse when there's a layer that's already been driven on. I've only put it one once this year so far. May use it this weekend to clean up some drifting.

Re: Minnesota Daily Driver
 

Replaced the t-stat. Noticed the truck wasn't getting up to temp. Not a great thing when it's around 20 below.

Re: Minnesota Daily Driver
 

Not much new to report. Just been driving it daily. The good news is that I was able to find some more pictures.

Here's wire wheeling the frame.

Re: Minnesota Daily Driver
 

Here's the underside of the box painted.

Re: Minnesota Daily Driver
 

These show how much floor was replaced on the passenger side.

Re: Minnesota Daily Driver
 

And to continue on with the build, here's some pics from the body shop.

Re: Minnesota Daily Driver
 

This is the white on the roof and tailgate.