![]() |
Re: Blake's 67 GMC stepside build
3 Attachment(s)
Pic #1. getting the Rot all cutout..
Pic #2. The new metal being welded in place.. Pic #3. the new brace installed.. All the new metal was coated with rust inhibitor and the old metal was all cleaned before coating.. |
Re: Blake's 67 GMC stepside build
Looks great Mark!
Nice new metal :metal: |
Re: Blake's 67 GMC stepside build
Better and better! Really like new metal.
|
Re: Blake's 67 GMC stepside build
AAHH!!! makes you fell all warm and fuzzy :lol:
Quote:
|
Re: Blake's 67 GMC stepside build
Yes sir...always a good thing..
Quote:
|
Re: Blake's 67 GMC stepside build
4 Attachment(s)
Onto the Passenger side..
Pic #1. Removing the old (sorry for bad pic) Pic #2. The new template.. Pic #3. All welded in.. Pic #4. The new brace welded in and all pretty again... |
Re: Blake's 67 GMC stepside build
Nothing better than 4 eyes!! keep up the good work
|
Re: Blake's 67 GMC stepside build
Nice piece Mark. Looking forward to more...truck is going to be nice.
|
Re: Blake's 67 GMC stepside build
Very nice patch work. What gauge metal are you using?
Thanks, Ryan |
Re: Blake's 67 GMC stepside build
Nuke1 and A.D. Thank's guys..
|
Re: Blake's 67 GMC stepside build
Ryan....I used 18g for my patch work..
Quote:
|
Re: Blake's 67 GMC stepside build
5 Attachment(s)
Next Update...
Pic #1. The new drivers side cab corner... Pic #2. The old piece marked and cut out... Pic #3. Welding in.. As you can see I had to do some slicing to relieve some spots for a better fit.. Pic #4. Another view. Pic #5. All metal finished.. Till next time.. Mark... |
Re: Blake's 67 GMC stepside build
didn't the 67 models also have the small back window? nice work by the way! very tedious with what you do!
|
Re: Blake's 67 GMC stepside build
Looks good Mark!
|
Re: Blake's 67 GMC stepside build
not 100% sure on that....as I stated before things are all different. On this thing I'm going by what I see on the numbers on the truck..
Quote:
|
Re: Blake's 67 GMC stepside build
Thanks A.D
|
Re: Blake's 67 GMC stepside build
5 Attachment(s)
Updates....
Pic #1. Passenger side corner... Pic #2. After all the work was done on the corner and cab set in place, so I could check out the door fitment.. Pic #3. If you go way back to the first shots of the truck when it was dropped off the drivers door was caved in pretty good. They tried to fix the "A" pillar with heat and it was all F'd up so it needed to be replaced.. Pic #4. The old piece cut out and new plate made.. Pic #5. Tacked in place with cage nuts for hinge.. (Bad pics sorry) |
Re: Blake's 67 GMC stepside build
4 Attachment(s)
Here are some more pics....
Pic #1. The lower section being replaced that was bad.. Pic #2. The upper section was badly crushed and they used a torch to try and fix it at some point. (so it came out as well so the door will close) Pic #3. The old piece removed and the cage nuts as well.. Pic #4. All fixed.. Next up....Firewall Mark... |
Re: Blake's 67 GMC stepside build
Again nice work Mark!
|
Re: Blake's 67 GMC stepside build
Thanks for showing your progress. I like the way you number the pics with a description than show the pics.
Ryan. |
Re: Blake's 67 GMC stepside build
Nice repair on the pillar Mark!
|
Re: Blake's 67 GMC stepside build
Nice work all around!
EDIT: I think the large window on a 67 was an option, it as placed into law in 68 for safety reasons (visablity) |
Re: Blake's 67 GMC stepside build
Kees,Ryan,Doug and swamp rat Thank's guys for the compliments!!!
|
Re: Blake's 67 GMC stepside build
Did not know that! Thank's for the info..
Mark... Quote:
|
Re: Blake's 67 GMC stepside build
4 Attachment(s)
Onto the fun stuff!!
I wanted to smooth out the firewall on this truck and get rid of the UGLY on it! Pic #1. Stock Pic #2. Side view of the Massive unit sticking out from firewall (Needs to go!!) Pic #3. Already looks better!! Pic #4. paint stripper used to get all the Years of multi colors of paint.. Next up, making filler panels to clean it up... Mark... |
All times are GMT -4. The time now is 03:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com