The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   1970 c10 lq9 build (https://67-72chevytrucks.com/vboard/showthread.php?t=665494)

akabikerbob 12-23-2015 11:23 PM
Quote:
Originally Posted by beerformeplz (Post 7421216)
What type of HP are you planning
630ish at the flywheel. 408 stroker lq9 cammed
Posted via Mobile Device

akabikerbob 12-23-2015 11:23 PM
Quote:
Originally Posted by akabikerbob (Post 7421235)
630ish at the flywheel. 408 stroker lq9 cammed
Posted via Mobile Device
All motor!!!!
Posted via Mobile Device
Posted via Mobile Device

beerformeplz 12-24-2015 12:20 AM
Re: 1970 c10 lq9 build
 
Quote:
Originally Posted by akabikerbob (Post 7421235)
630ish at the flywheel. 408 stroker lq9 cammed
Posted via Mobile Device
Wow. Just had mine dyno tuned. Made 371 and 405tq. Lq9 243 heads and ls6 cam.

akabikerbob 12-24-2015 12:42 AM
Quote:
Originally Posted by beerformeplz (Post 7421299)
Wow. Just had mine dyno tuned. Made 371 and 405tq. Lq9 243 heads and ls6 cam.
At the wheels or flywheel. 630 ish is possible. But has to be all right bolt on on top of built motor , cam and a great flowing set of heads. Can't wait to drive this beast. All the way to sema in Vegas.
Posted via Mobile Device

beerformeplz 12-24-2015 12:44 AM
Re: 1970 c10 lq9 build
 
Quote:
Originally Posted by akabikerbob (Post 7421331)
At the wheels or flywheel. 630 ish is possible. But has to be all right bolt on on top of built motor , cam and a great flowing set of heads. Can't wait to drive this beast. All the way to sema in Vegas.
Posted via Mobile Device
At the wheels

akabikerbob 12-24-2015 10:14 AM
Quote:
Originally Posted by beerformeplz (Post 7421336)
At the wheels
Nice. Have you ran it down the 1/4 mile yet?
Posted via Mobile Device

New_70'C10 12-24-2015 10:57 AM
Re: 1970 c10 lq9 build
 
Just found this one but it sure looks like it will definitely be worth following. Great work you've done so far. Keep it up and I'm sure you will have it done so you can make it to SEMA next year.

beerformeplz 12-24-2015 11:22 AM
Re: 1970 c10 lq9 build
 
Quote:
Originally Posted by akabikerbob (Post 7421530)
Nice. Have you ran it down the 1/4 mile yet?
Posted via Mobile Device
Not yet. Trying to decide on tire size. Right now I have a 29x12.5x15 and looking for something similar in a drag radial is almost impossible. I don't want a basis ply.

Longhornss 12-24-2015 12:59 PM
Re: 1970 c10 lq9 build
 
Quote:
Originally Posted by BugzC10 (Post 7416768)
Look at post 2939 of this tread. Marquez Design? I looked at their site and did not locate it. I asked the poster and he didn't respond.
http://67-72chevytrucks.com/vboard/s...12422&page=118
Defiantly is Marquez Designes that does this piece, it is not on their web site.
Jorge over there has sent me pics of this part.

akabikerbob 12-26-2015 10:45 PM
Re: 1970 c10 lq9 build
 
1 Attachment(s)
Got a tiny bit done today after work.

akabikerbob 12-26-2015 10:46 PM
Re: 1970 c10 lq9 build
 
1 Attachment(s)
Cut out

akabikerbob 12-26-2015 10:46 PM
Re: 1970 c10 lq9 build
 
1 Attachment(s)
Tacked in

beerformeplz 12-26-2015 10:54 PM
Re: 1970 c10 lq9 build
 
1 Attachment(s)
Filled mine in also

akabikerbob 12-26-2015 11:42 PM
Quote:
Originally Posted by beerformeplz (Post 7424038)
Filled mine in also
Looks nice and clean!!
Posted via Mobile Device

Richie209 12-27-2015 03:08 AM
Re: 1970 c10 lq9 build
 
Nice work!! What shop do you work at if you don't mind me asking, I'm in Stockton I'm doing a frame off resto myself...

akabikerbob 12-27-2015 11:40 AM
Re: 1970 c10 lq9 build
 
Quote:
Originally Posted by Richie209 (Post 7424227)
Nice work!! What shop do you work at if you don't mind me asking, I'm in Stockton I'm doing a frame off resto myself...
Hello

I am the foreman at custom design mfg and jokers fab in Lodi. We do all kinds of custom work. From Harley's to peterbilts. And everything in between

88Stanger 12-27-2015 07:48 PM
Re: 1970 c10 lq9 build
 
nice job on the truck so far!

akabikerbob 12-27-2015 07:49 PM
Quote:
Originally Posted by 88Stanger (Post 7424898)
nice job on the truck so far!
Thank you. A lot of work so far and a lot left lol
Posted via Mobile Device

akabikerbob 12-27-2015 07:50 PM
1 Attachment(s)
got quite a bit done today.
Posted via Mobile Device

akabikerbob 12-27-2015 07:52 PM
1 Attachment(s)
Lock hole
Posted via Mobile Device

akabikerbob 12-27-2015 07:52 PM
1 Attachment(s)
No lock hole
Posted via Mobile Device

akabikerbob 12-27-2015 07:53 PM
1 Attachment(s)
Antenna hole
Posted via Mobile Device

akabikerbob 12-27-2015 07:54 PM
No antenna hole
Posted via Mobile Device

akabikerbob 12-27-2015 07:55 PM
1 Attachment(s)
Oops.
Posted via Mobile Device

akabikerbob 12-27-2015 07:56 PM
1 Attachment(s)
Being a California truck I have 99% rust free truck. Only spot is where the battery acid did in the rust protection.
Posted via Mobile Device


All times are GMT -4. The time now is 08:02 PM.
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com