The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NE 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!! (https://67-72chevytrucks.com/vboard/showthread.php?t=733154)

jmader 03-21-2017 10:11 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Good to see another GI guy on here! How is the seat?

Bueno 68C-10 03-21-2017 10:16 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by too much stuff (Post 7893097)
Is there any issues at all with the dash pad? Corners curling up or cracks? Is it still fairly soft?
It looked nice, but pressed to see how soft it was and it cracked... Sorry. :(...so the choke delete $10 plus $5 shipping sound good?

Bueno 68C-10 03-21-2017 10:18 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by jmader (Post 7893151)
Good to see another GI guy on here! How is the seat?
The seat covers are decent maybe one or two rips, but the cushions have had some rodent tunneling. I'll make ya a deal on it.

Bueno 68C-10 03-21-2017 10:22 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by 70/JJ (Post 7893110)
What kind of shape are the outside door handles in?
Building patina truck so don't need to be perfect.
I've got a pretty nice set! $30 plus $15 to ship sound fair?

70/JJ 03-21-2017 10:23 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Sounds good to me send me PM and I'll send you usps money order if that good for you??

Bueno 68C-10 03-21-2017 10:49 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
70/JJ pm sent

ScottH pm sent

StormBear pm sent

cr1hotrod 03-22-2017 01:05 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks

jmader 03-22-2017 08:08 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by Bueno 68C-10 (Post 7893165)
The seat covers are decent maybe one or two rips, but the cushions have had some rodent tunneling. I'll make ya a deal on it.

PM sent

too much stuff 03-22-2017 09:20 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by Bueno 68C-10 (Post 7893162)
It looked nice, but pressed to see how soft it was and it cracked... Sorry. :(...so the choke delete $10 plus $5 shipping sound good?
That will work for the choke delete. Send me your paypal.

Bueno 68C-10 03-22-2017 09:51 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by too much stuff (Post 7893425)
That will work for the choke delete. Send me your paypal.
Pm Sent

Bueno 68C-10 03-22-2017 09:52 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by cr1hotrod (Post 7893293)
Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks
Ok I will go pull that off the truck and take some pictures of it.

Bueno 68C-10 03-22-2017 12:08 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
1 Attachment(s)
Quote:
Originally Posted by cr1hotrod (Post 7893293)
Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks
It is a 68 cab with a 67 front Clip. Here are the pictures of the brackets. Attachment 1634740

Bueno 68C-10 03-22-2017 10:34 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by Hunter67stepside (Post 7892297)
I will take them for 40 pending pictures. Tomorrow is fine. Also is the drivers side vent window assembly in ok shape. I see where you listed the glass but I am interested in the entire vent window assembly with glass. If so let me know price and we can combine shipping. Thanks a lot
My phone broke today, but I will try to get the seat belt pictures up tomorrow.

Bueno 68C-10 03-22-2017 10:36 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by hounddogs! (Post 7892945)
If you're cutting the cab, how's the floor? Specifically, at the kick panels and the outrigger supports going outward towards the rockers.


Loren
I looked today and the floors and bottom of the cab are gone. The good panels are along the roof and drip rails.

m7vasque 03-22-2017 10:49 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Hi do you have a center link available for a 67-70 c10 half ton? Shipped to 92024

Bueno 68C-10 03-23-2017 10:23 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by m7vasque (Post 7894099)
Hi do you have a center link available for a 67-70 c10 half ton? Shipped to 92024
I only have the one off of this truck and this truck is a 3/4 Ton... I'm not sure if they would be the same or not. I can compare the one off of this truck to my half ton.

68 c20 cst 03-23-2017 11:19 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
You still have Yankee lights?

Bueno 68C-10 03-23-2017 03:06 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by 68 c20 cst (Post 7894370)
You still have Yankee lights?
sorry they are I sold. I will update the parts list.

Bueno 68C-10 03-24-2017 10:09 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
1 Attachment(s)
Quote:
Originally Posted by Hunter67stepside (Post 7892297)
I will take them for 40 pending pictures. Tomorrow is fine. Also is the drivers side vent window assembly in ok shape. I see where you listed the glass but I am interested in the entire vent window assembly with glass. If so let me know price and we can combine shipping. Thanks a lot
Here is the picture sorry took me so long to get my phone fixed. Attachment 1635211

Hunter67stepside 03-24-2017 10:40 AM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Im glad I asked for pick. I have a 67 and was expecting the seatbelts buckle style to be the aircraft style with Bowtie emblem...so these will not work for me.

I guess we are left with the drivers side vent frame. Can you shoot me a price on that delivered to Nashville 37027? Thanks

master 1969 c10 03-24-2017 07:55 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
How much for the cut out of the radio ashtray in the heater control patch panel neeting it for a pattern. Ship to 45690 thanks Doug

crossjo 03-24-2017 09:19 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
I need the drivers side engine perch/stand for a small block V8. Thanks.

Bueno 68C-10 03-24-2017 09:30 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by Hunter67stepside (Post 7895162)
Im glad I asked for pick. I have a 67 and was expecting the seatbelts buckle style to be the aircraft style with Bowtie emblem...so these will not work for me.

I guess we are left with the drivers side vent frame. Can you shoot me a price on that delivered to Nashville 37027? Thanks
Pm sent

Bueno 68C-10 03-24-2017 09:31 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by master 1969 c10 (Post 7895636)
How much for the cut out of the radio ashtray in the heater control patch panel neeting it for a pattern. Ship to 45690 thanks Doug
Do you want the ashtray and the heater controls left in it?

Bueno 68C-10 03-24-2017 09:35 PM
Re: 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!
 
Quote:
Originally Posted by crossjo (Post 7895713)
I need the drivers side engine perch/stand for a small block V8. Thanks.
I've got one $15 plus the ride.


All times are GMT -4. The time now is 07:16 PM.
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com