Re: Barger's 79 FJ40
4 Attachment(s)
Pic 1. This was just after mounting the body.
Pic 2. Installing knobs and switches. Pic 3-4 After refurbishing The dash pads. Mark |
Re: Barger's 79 FJ40
Nice!
They look just like the good old Willy’s Jeep in the first pic.... |
Re: Barger's 79 FJ40
Wow! That sure is looking nice! At first the color wasn’t catching my eye, but now, putting it back together I’m liking it more and more!
Nice work!! |
Re: Barger's 79 FJ40
Thanks Guys!
Mark |
Re: Barger's 79 FJ40
3 Attachment(s)
Dash all assembled.
I refurbished all the buttons,knobs and switches. The steering column,wheel and pedals are also refurbished by me. Gauge cluster is new. Mark |
Re: Barger's 79 FJ40
looks good Mark..what did you do when you refurbished the steering wheel? it looks great...ive got one that's cracked im gonna try to save
|
Re: Barger's 79 FJ40
Beautiful work!!
|
Re: Barger's 79 FJ40
Thanks Guys!
Greg, I took the wheel and used a pointed carbide bit and opened the cracks, Then used Epoxy to fill those. Then you can spray primer and finish like you would on any other part. Mark |
Re: Barger's 79 FJ40
Thanks Mark..I've been reading up on fixing the steering wheel and was curious how you did yours..on the epoxy..any certain brand or type you used?..thanks..
|
Re: Barger's 79 FJ40
Wow, that dash looks new!
|
Re: Barger's 79 FJ40
Greg, A 5 min. JB Weld (JB Quick) is what I used
Dries fairly quick (let it sit for a few hrs before sanding) then you can prep it as a normal part for prime and paint |
Re: Barger's 79 FJ40
Thanks Doug, It was alot of work getting it all done, but well worth it.
|
Re: Barger's 79 FJ40
Thanks Mark...ived used lots of jb quick...I just wondered if you had used one of the steering wheel kits...
|
Re: Barger's 79 FJ40
A friend of mine used PC7 on his wheel, but it is a real pain to work with
|
Re: Barger's 79 FJ40
4 Attachment(s)
Pic 1. A few pieces after being repainted.
Pic 2. The blower motor case after I refurbished it. (was a total mess) Pic 3. Blower motor after refurbishing. Pic 4. Here you can see the blower installed on the left side. This also shows the new Carb,master and clutch master installed. Mark |
Re: Barger's 79 FJ40
5 Attachment(s)
Pic 1. After I recovered the seats.
Pic 2. Gas tank and cover installed. Pic 3-5 refurbishing the headlights buckets and grill install. Mark |
Re: Barger's 79 FJ40
So nice!
You are going pretty fast now! |
Re: Barger's 79 FJ40
Thank's Kees! (remember this is already finished so,it will move fast through the build)
Mark |
Re: Barger's 79 FJ40
Quote:
At least let me think you are going fast then! ;) |
Re: Barger's 79 FJ40
:c2:
|
Re: Barger's 79 FJ40
3 Attachment(s)
getting a few more pieces installed.
Mark |
Re: Barger's 79 FJ40
2 Attachment(s)
Seats,Mirrors and Roll cage painted and installed.
Mirrors,front blinkers and factory hub caps. |
Re: Barger's 79 FJ40
3 Attachment(s)
pic 1. After fighting the glass I was able to get the roof side panels set in place.
Pic 2. The windshield and the curved glass were the hardest to get installed. Pic 3. And finally the rear doors. Mark. |
Re: Barger's 79 FJ40
I know it's done and gone but this thing just gets betterer and betterer....
|
Re: Barger's 79 FJ40
Sure is bettererer :lol::lol:
Looks real nice, love the color in this car!! |
All times are GMT -4. The time now is 10:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com