Re: LS1 into a 73 cheyenne
5 Attachment(s)
sum more
|
Re: LS1 into a 73 cheyenne
4 Attachment(s)
A/C compressor billet front cover, some before and after shots.
|
Re: LS1 into a 73 cheyenne
:chevy:some nice looking Bling! Dude, I wish we had half your budget. Keep the pics coming!
|
Re: LS1 into a 73 cheyenne
The pulley covers look great. I was wondering, does that type of air inlet system cause problems with heat soak? Either way the dual air intake looks cool.
|
Re: LS1 into a 73 cheyenne
Let me know how you like the tubing bender and how much it was, I need to get one soon. Hw much was the whole intake air filter set up?
Looking great! |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
Quote:
I got the intake polished LS6 twin air horn from Street & performance http://www.hotrodlane.cc/ for 306.95. with a polished 5 pin MAF adapter for $42.95 To mount this it uses two small allen screws which I replaced with a Spectre 4" tube connector I got that for$15 The filters are from Spectre I got those from Jegs for $31.99. Kragen or Autozone carries them for $39.00. specs- 3", 3.5", and 4" diameter inlet tubes Blue: 6" W x 10.25" L |
Re: LS1 into a 73 cheyenne
2 Attachment(s)
different angles
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
I changed my thermostat to a straight billet from CSR with a cooler thermostat of 71C 160F
|
Re: LS1 into a 73 cheyenne
link to the tube bender http://www.stridetool.com/tools/hose...enders_01.html
|
Re: LS1 into a 73 cheyenne
Thanks for the info!
|
Re: LS1 into a 73 cheyenne
5 Attachment(s)
Today i got my fuel rail covers these covers capture the original styling of the Chevrolet small block valve cover with its raised fins and classic Corvette script. I got these custum painted to match the ride.
They look sweet!:metal: |
Re: LS1 into a 73 cheyenne
how much did them cost?
|
Re: LS1 into a 73 cheyenne
Those covers look SWEET! Man, you aren't forgetting to touch anything.:metal:
|
Re: LS1 into a 73 cheyenne
when do you think you will sit the motor in?
|
Re: LS1 into a 73 cheyenne
Those are so slick. Looking very good.
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
I used rubber efi fuel line (with high presure clamps) on 5.0 swaps in mustangs and it holds up great. One of my builds is at about 7 years old with no issues. |
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Holy cow that's a lotta bling! I'd like to know your opinion on what the effect of sucking all that heat through the split intake has on performance one it is up and running. Do you plan on doing a dyno tune once it's done?
Looking sweet, love the truck too! |
Re: LS1 into a 73 cheyenne
:metal:Very Nice!! Subscribed!!:metal:
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Today I sent my harness and computer to get re tuned at Wait 4 Me Performance. They offer free retunes for life, just in case if you do any changes.
Tuning for smog exempt as I will not be running all the smog items, and tuning in accodance to the new cam specifications, will result in more power and better gas milelage. Overall more efficient. Link http://www.wait4meperformance.com/ |
Re: LS1 into a 73 cheyenne
Are you able to tell, with the S&P headers, if there will be any clearance issues on the passenger side if the rubber engine mount were to be moved back 2" from where the S&P plate would normally locate them? Thanks!
|
Re: LS1 into a 73 cheyenne
man what camera are you using, the photos are awesome!
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
You probably already know this but depending on the year of the LS motor it will have different exhaust manifolds, Stock the ones that have the heat shroud over them will not fit on the passenger side, will need to be grinded down about 1/4" |
Re: LS1 into a 73 cheyenne
1 Attachment(s)
Quote:
various lenses, most of thes pics were used shooting with a 2.8f 24-70mm. This is my Flickr page check it out http://www.flickr.com/photos/50857118@N08/ |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
these are my other projects 1981 k5 blazer with LS1, 73 chevrolet cheyenne dissasembled getting the body prepd for paint. This is the newest take on orange from the General, and it can be found on '08 Corvettes. It's called Atomic Orange (code 83), and it's a few shades lighter than the previous year's Daytona Orange (code 71). Will be dropping an LS1 on it to. The other blazers is a friends and its being choppd to make it a convertible.
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
few more pics.
|
Re: LS1 into a 73 cheyenne
1 Attachment(s)
making this into a convertible
|
Re: LS1 into a 73 cheyenne
man... you got alot going on there!
|
Re: LS1 into a 73 cheyenne
Thats what I was thinking. Lots of cool looking projects though.
|
Re: LS1 into a 73 cheyenne
Quote:
I want me a Nikon DSLR so bad. |
Re: LS1 into a 73 cheyenne
1 Attachment(s)
another pic of my fat gurl :metal:
|
Re: LS1 into a 73 cheyenne
That is a really nice picture and the truck should be extremely nice when it all comes together.
|
Re: LS1 into a 73 cheyenne
The ultimate sleeper truck!
Before you lay the paint down, you gotta go out and cruise around! with the truck looking plain jane, & the LS lurking beneath the hood! U could beat the brakes off of most of the cars out there! LoL Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
Quote:
|
All times are GMT -4. The time now is 04:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com