I have a 1966 long bed frame roller free if anyone wants it. Hillsboro oregon
Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
ol skool, I wish you did not live so far away. That is what I need to start my winter project...dang it...
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Thank You!
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.
Jerry |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I'm thinking of temporarily modifying my truck in a "Mad Max" style for halloween, and want to make some crazy fake engine coming out of the hood. But even though I have a better hood that will eventually go on, I don't want to trash the current one, as it is definitely fixable for someone who needs it. It'll need a front panel, and some holes patched on the side, but most of it is solid.
To that end, I'm willing to swap the current hood straight-up to anyone local for their trashed hood. I just need one solid enough to bold up & latch. Don't care about rust/dents/paint/etc. https://farm8.staticflickr.com/7661/...6ceb6cb5_z.jpg https://farm4.staticflickr.com/3881/...6d575168_z.jpg https://farm3.staticflickr.com/2896/...25810672_z.jpg |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Anybody need an under-bed spare tire carrier? It came off my '62 non-dually C30.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Arghhh... I wish I was closer. I have zero spare hardware.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
How about some wide mirrors? Just need some cleaning up.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
PM sent
|
Re: The 60-66 "PAYING IT FORWARD" thread!
How much to ship the hardware to 28306?
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one.
No shipping I am in San Jose . |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
I'm in San Jose let me know. Let me know |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Taken by Rolland
I posted a free manual steering box with low mileage in the 60-66 parts forum. Just pickup or pay shipping Fantastic thread! Props to the OP |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
These bits of harness weren't worth posting. I've wrapped them up and put them in a box.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Thanks BP |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a 250 6 cylinder engine and 3 speed trans in a 66 I am going to scrap. Engine appears to be in good shape and according to the previous owner ran till he got working on it. Free to anyone who wants to come and get it. Located in south east Virginia.
Jimmy |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
the windshield went to Josh jteck10.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
>>>>
I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two. Jerry Did you get rid of these? If not I could use them. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Free
- Local - Oregon City 6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia. |
All times are GMT -4. The time now is 08:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com