Re: post latest 1/4 and 1/8 mile times and 60ft.
 

first run in the 13s!! 13.999 fastest run so far is a 13.98!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

11.20@120mph.
1.59 60ft
you can watch the run here. The guy i lined up next to was a street racer so he didnt want the time up on the board.
http://www.youtube.com/watch?feature...&v=SCa8-X_wWKs

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

need to post up some pictures and a build thread, bad a--:metal:

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

1980 longbox
10.94@119mph
1.48 sixty foot
iron headed 468 with th400
33.5 x 15 slick
i will get some pics up later

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

here's couple of picshttp://i466.photobucket.com/albums/r...0/IMG_0167.jpg

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

7.91 et 1/8th mile @ 87 mph !

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

nice truck. Post some pictures.....:metal:

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Cool welcome to the board.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

http://i28.photobucket.com/albums/c2...99345_6990.jpg
http://i28.photobucket.com/albums/c2...99345_6990.jpg
http://i28.photobucket.com/albums/c2...F/PIC_0136.jpg
http://i28.photobucket.com/albums/c2...F/PIC_0135.jpg

Soon to have....
http://i28.photobucket.com/albums/c229/KD8BFF/002-3.jpg

Oh and another couple vid's !

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

My buddy ran last night 1/8 mile in a 74 long bed chevy with a 414 sbc/350th/410gears/28-11.5 slicks and ran 7.91 at 88 mph.
Posted via Mobile Device

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

http://hotimg23.fotki.com/a/71_203/5...ture404-vi.jpg
http://hotimg23.fotki.com/a/71_203/5...cturevi-vi.jpg

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

383chevy. give some details on your set up.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Its a 388ci stroker, word product sportsman ll heads, crane rockers, new summit cam, had 4.11 gears its got 3.23 now waiting to find some 3.73. Ran it with 33" bfg all terrains and won the class i was in, motor is being rebuilt due to a burnt out piston hopefully get her back on the road and maybe lower it an inch or 2 and put drag radials on it

http://hotimg23.fotki.com/a/71_203/5...e400-vi342.jpg

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

June 2010 NHRA Unleashed Outlaw 10.5 Class
New AWD world record
60ft 1.01
330 ft 3.02
660 ft 4.77 @ 150 mph
http://youtu.be/2Liw_8hEuo8

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Holy crap:metal:

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Welcome to the board! How are the repairs coming? I met you in Montgomery when you were just getting the truck going. Good luck with getting it back to the track soon. Tell Lisa we said hello!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Thanks . The repairs are coming along pretty good. We hope to be back out by the end of July . Feel real good about being able to run in the .40's or maybe even .30's when we get back out there . We corrected a lot of things that have been holding us back . We are excited about getting back out there . Thanks , Bobby . Oh and Lisa says hello everyone .
http://www.msmisery.com/gallery/albu...l_MMP_0167.JPG

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I just watched the video. DAAANG

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Welcome msmisery.....Love the truck

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Cool picture and its taken at my home track!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Just got back from my truck's first run at the track. It was truck/suv night at music city raceway (1/8 mile track). Not a very good turnout at all. I ran a whole second slower than I was expecting so I have some work to do. I couldn't get any tire spin to save my life and I think that hurt me. Ran 10.8 pretty consistently all night. Had a couple of fluke freak runs. Here's the best.

RT - .296 (once i settled down i was consistently .170)
60' - 2.51
330' - 7.03
ET @ 594 - 10.00
1/8 ET - 10.66
1/8 mph - 67.57

Obviously my 60' times killed me. Felt like it took forever to get into the powerband without tirespin. Here are my engine specs.

Stock 350 bottom end
Comp Cams 268 High Energy K-Kit
Heavy Chevy 185 heads
Edelbrock Performer Intake
Stock Q-Jet
MSD Streetfire HEI (conservative advance weights and springs)
Stock Rams Horn manifolds to true dual 2.25 exhaust with stockish turbo style mufflers.

Even though I ran at the back of the pack I still had a great time. And I'm pretty sure my truck was the oldest vehicle out there. ::metal::

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Have to add that it was blazingly hot and humid.. at least 90 degrees all night with a good 65-70% humidity.

Rear end gears I think are 3.23s. Was crossing the finish line about half way thru second gear.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

A milliom years ago(seems like it) I had a very simular set up in mine. It ran 14.70 @ 90 MPH. Seems lit it was 9.50 in the 1/8,,,,now it runs 5.89 in the 1/8 amd very bottom 9's in the 1/4

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Big Jim that is about what I ran on Pass Time 3 years ago now I am adding 80 cubic inches and More nitrous!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Yeah I think there's still some power that I haven't untapped yet. Especially in my mechanical advance. Moving this weekend but hoping to do some tweaking and hit the strip again in two weeks.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Kevin
Next time out I'm going to spray it for the first time. My chassis is only good to 8.50. I'll spray what it needs to go below 8.50 once.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Sweet. When I get the 548 in mine I'm planning on spraying it pretty hard! Wish me Luck.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Luck!























now hurry up and finish that beast!!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

New times with the 408 SBC after fixing the rear end after it spun center section on axle tubes 1st time out. Drove 41 miles one way to the track. Ripped off 7 passes then drove back home.

SLICKS Hoosier 29.5x11.5w 10 PSI 2 step 3800rpm
60'---1.591 not as good as others best for the day was 1.574
1/8---7.249
mph---94.5
1000'---9.527
1/4---11.480
MPH---115.06

My street tire time
Hoosier Q/T pro's 28x13.5 Tire pressure to 12 psi and 2 step at 3400rpm
60'---1.633
1/8th---7.299
MPH---94.32
1000'---9.572
1/4---11.509
MPH---115.90

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

very nice!!!! Almost same times as mine

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

DANG YOU BIG BLOCK GUYS. HAHA
That's the truth. It would be fun to race against trucks with similar ET's.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

We would have been even closer.. Congrats!!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Thanks Shaun,
It would of came down who treed who if we lined up to see who took the stripe.
But then you would of blown right by me. You pull some serious MPH.

I'm excited for your new back half and motor/trans combo. keep that build thread coming!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I only had the mph I did do to the lock up verter. I have also been told recently that Sacramento's 1/4 mph is roughly 3mph high compared to other tracks with similar DA. So maybe a combo of both?

Someday I want to go visit my brother and take my truck to the strip in Medford.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Hell YA! come up. I never raced in Medford neither. My buddy has a 53 GMC drag truck That's dying to head down.

It would be a day to remember. A few SBC powered trucks taking the stripe again and again. Beating up on those big tire big block cars!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Now I know this isn't a classic or anything special, but its my daily driver and all I got until my 67 gets finished. It's a 99 GMC Sierra SLE with 175,000 miles on it!

Race weight with me in it : 4420 LBS.

Engine and Trans : Engine has about 60,000 miles. 6.0 LQ9 Stock bottom end and heads. 228R cam from Texas Speed, Comp 918 Springs, and Chromoly Push Rods. 8.1 injectors. Voolant Cold Air Intake, Pacesetter Long Tubes W/ Offroad Y-pipe into a Super 44 Flowmaster Dumped. 05-07 Cooling Fans. ECM is tuned with HP Tuners. 3600 Yank Converter. Billet 1-2 Servo. Rear Gear Stock 3.73 with RPO G80 Limited Slip.

60 Ft : 1.9 Personal Best (1.7)

1/4 Mile : 13.0 Consistent. Personal best (12.89 at 105mph)

MPH : 102-105 mph

All of this was done with M/T ET streets 26x11.50x16 on the back and 20's on the front.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I went out Friday night to the track to do some testing on the new competition engineering
rear shocks with the correct travel lengths. Found out I could turn the 2 step off and let those tires fight. It was real viscious launches, but fun.
It was even fun getting passed by a 71 chevelle doing a wheelie LOL. At least I treed him.
Turns out he had a all aluminum 632 that has ran in the 8.90's small tire.
well here is the 2 best 60' runs. The MPH seems a little slow to me.
60-1.556/1.549
1/8-7.241/7.248
mph-93.59/93.44
1/4-11.535/11.552
MPH-112.38/112.06

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Nice looking Truck.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Thanks man! I had a question didn't feel the need to make a thread over nor steal this thread, but I was wonder what kind of weight I'd be looking at with my 67 shortbed?
Posted via Mobile Device

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I 2nd that. Have you seen those squire turbo systems. They are neat.\

http://ststurbo.com/home